Browning Citori 725 Problems And Their Solutions

If you are reading this post means you are facing some issues with your Browning Citori, am I right? Don’t worry.

Many users have reported common issues with this gun, including Misfire, Firing Pin Problems, Trigger Problems, Failure To Feed, Barrel Problems, Stock loosing problems, Ejector Problems, and Magazine Issues.

So, we are going to discuss some common problems and their solutions. So after reading this, you can fix the issues related to your gun.

Continue reading this post to learn how to fix the issue you are experiencing with your gun.

Common Browning Citori 725 Problems And Their Solutions

1. Misfire

Have you ever experienced a misfire while handling your Browning Citori 725? It can be an unpleasant experience for any gun enthusiast.

Misfires can occur for several reasons, including a dirty or fouled firing pin, worn firing pin spring, defective or damaged ammunition, dirty chamber or barrel, or even a weak hammer spring.

A dirty or fouled firing pin can cause a misfire by preventing the firing pin from striking the ammunition with enough force.

Similarly, a worn firing pin spring can also decrease the impact of the firing pin on the ammunition, resulting in a misfire.

Defective or damaged ammunition can also cause misfire if they have malfunctioned due to manufacturing defects or improper handling.

Another common cause for misfire is a dirty chamber or barrel. If the chamber or barrel is not cleaned properly, it can lead to residue buildup, impacting the gun’s firing mechanism.

Lastly, a weak hammer spring can also cause misfire, as the spring is responsible for generating enough force to strike the firing pin.

Fortunately, you can take a few steps to fix these issues.

Firstly, you can thoroughly clean the firing pin and the pin channel to remove any dirt or residue.

Secondly, you can replace the worn firing pin spring with a new one, ensuring that it generates enough force to strike the ammunition.

Thirdly, you can troubleshoot defective or damaged ammunition by purchasing high-quality and storing them in a cool, dry place.

Moreover, cleaning the chamber and barrel of your Browning Citori 725 is essential.

You can do this by using a cleaning solvent and a bore brush to remove any residue buildup.

Lastly, if you suspect that a weak hammer spring is causing misfires, you can replace it with a stronger one to increase the force of the hammer.

2. Firing Pin Problem

Firing pin problems can arise from a variety of causes, and it’s important to learn about these causes in order to prevent future issues.

One common cause of firing pin problems is spring issues. Over time, the spring may weaken or break, causing the firing pin to fail to strike the primer with sufficient force.

Another common issue is firing pin breakage.

This can occur due to wear and tear, or if the pin is subjected to excessive force. In addition, blockage or obstruction in the firing pin channel can also cause issues.

If you’re experiencing firing pin issues with your Browning Citori 725, don’t panic. There are steps you can take to fix the problem.

Firstly, begin by removing the forend and barrels.

Next, look for any obstructions or debris in the firing pin channel. If you notice any, use a cleaning brush to remove the blockage.

If the issue is with the spring, carefully remove it from the firing pin and replace it with a new one. Finally, ensure that the firing pin is properly aligned.

The pin should slide smoothly through the channel without any resistance. Once you’ve completed these steps, you should be good to go.

Firing pin problems can be frustrating to encounter with your Browning Citori 725. However, knowing the common causes and their solutions can give you the confidence to resolve these issues quickly and easily.

3. Trigger Problem

If you are experiencing issues with the trigger on your Browning Citori 725, there could be several possible reasons for this.

It is important to investigate the cause of the problem to determine the appropriate course of action for fixing it.

The most common causes of trigger problems include dirt or debris, weak or broken trigger springs, rust or corrosion, wear and tear, poor ammunition quality, and improper adjustment.

These issues can lead to a variety of trigger malfunctions, such as a sticky trigger, a trigger that won’t reset properly, or a trigger that won’t fire at all.

Luckily, some basic maintenance and adjustments can fix many of these issues. Here’s a step-by-step guide:

1. Check for dirt or debris: Use a clean cloth to carefully wipe away any dirt or debris clogging your trigger mechanism.

2. Check the trigger spring: If it is weak or broken, you may need to replace it. Consult your owner’s manual or a qualified gunsmith for guidance.

3. Address rust or corrosion: Use a gun cleaner or oil to gently remove any rust or corrosion that may be affecting your trigger mechanism.

4. Check for wear and tear: Inspect your trigger mechanism for signs of wear and tear, such as cracks or other damage. If you see any issues, it may be time to replace your trigger assembly.

5. Use high-quality ammunition: Poor ammunition quality can cause a variety of issues with your firearm, including trigger malfunctions. Use high-quality ammunition to ensure the best possible performance.

6. Adjust your trigger: If it is improperly adjusted, it may not function properly. Consult your owner’s manual or a qualified gunsmith for guidance on properly adjusting your trigger mechanism.

By following these steps, you can address many of the common causes of trigger problems and keep your shotgun functioning at its best.

4. Failure To Feed

Feeding is loading ammunition into the firearm’s chamber or firing mechanism to prepare it for firing. If it is not working properly, you won’t be able to fire.

And there are many reasons for failure to feed problems occur in your firearms.

One of the main causes of failure to feed is magazine issues. Look inside the magazine to ensure it isn’t bent or damaged.

If it is, replace the magazine with a new one. If it appears in good condition, try cleaning it thoroughly and reassembling it correctly.

Another common cause is a weak or damaged recoil spring.

Check the recoil spring and ensure it is not damaged or worn out. If it is, replace it with a new one.

Extractor and ejector problems can also cause failure to feed. To check for this issue, remove the barrel and inspect the extractor and ejector for damage or wear.

If they appear in working order, try cleaning them thoroughly with a cloth and reassembling them correctly.

Ammunition issues can also cause your shotgun to fail to feed. Make sure you are using the correct type of ammunition for your firearm.

If you are, try switching to a different brand of ammunition to see if that solves the problem.

Finally, broken or worn parts can cause failure to feed. Inspect all parts of your shotgun for any visible damage or wear.

If you find any, it may be necessary to replace the damaged parts to fix the issue.

By following these straightforward steps, you can effortlessly identify and resolve any issues in order to guarantee the secure and efficient functioning of your firearm.

5. Barrel Problem

Barrel problems can manifest in various forms such as overheating, using improper ammunition, and barrel obstruction.

These problems can lead to damage and reduced effectiveness of your firearm.

Overheating is a common cause of barrel damage and can occur due to excessive firing of your shotgun or using it in hot weather conditions.

Using improper ammunition, including the wrong gauge size or not using the recommended shot size, can also cause damage to the barrel. Barrel obstruction due to dirt, mud, or debris can also hamper your shotgun’s performance.

But worry not, as here are some steps that you can take to fix these issues and ensure that your Browning Citori 725 performs at its best:

1. Overheating: If your shotgun’s barrel is overheated, the first thing you should do is to stop firing it immediately.

This will allow the barrel to cool down. To expedite the process, you can spray water on the outside of the barrel. Never pour cold water into a hot barrel, as it can cause the metal to warp.

2. Using improper ammunition: Always use the recommended ammunition for your shotgun.

The recommended gauge size and shot size are usually mentioned in the manual that comes with your Browning Citori 725. Using the wrong ammunition can cause damage to the barrel and other parts of your firearm.

3. Barrel obstruction: If you’re facing barrel obstruction due to dirt, mud, or debris, you should remove the obstruction as soon as possible.

To do this, you should first unload your shotgun and clear the chamber.

Then, use a cleaning rod and a barrel snake to clean the barrel. You can also use a cleaning solvent to remove any hardened dirt or debris.

6. Stock loosing problems

As a shotgun owner, you may have encountered an issue with the stock becoming loose.

This can understandably be a frustrating experience, particularly if you are in the middle of a hunting or shooting session.

It is essential to address this issue to ensure your safety and maintain the optimal performance of your shotgun.

There are several reasons why a shotgun stock might become loose over time.

One of the most common causes is regular use, particularly if the gun is exposed to frequent recoil.

Another reason could be that the stock was not properly installed in the first place. If the screws holding the stock in place are not tightened enough, this could lead to the stock becoming loose.

Thankfully, fixing this issue is relatively simple.

The first step is to disassemble the shotgun and carefully remove the stock.

Once you have the stock off, inspect the screws and the inside of the stock to see if there are any signs of wear or damage.

You may need to replace the screws or the stock itself if there are.

Assuming everything looks okay, the next step is to clean the screws and the holes where they go into the stock.

This will help ensure a tighter fit and reduce the likelihood of the stock becoming loose again in the future.

Finally, reassemble the shotgun and test it out to make sure everything is tightened properly.

7. Ejector Problem

Another common problem with this gun is the Ejector problem.

One of the main causes of ejector problems is dirt and debris.

Over time, dirt and debris can build up in the ejector system, causing it to malfunction.

This can be easily fixed by cleaning the ejector system thoroughly with a soft-bristled brush and some gun cleaning solution.

Another common cause of ejector problems is lack of lubrication.

If the ejector system is not properly lubricated, it can become stiff and sticky, making it difficult for the shells to eject properly.

To fix this issue, simply apply a small amount of gun oil or lubricant to the ejector system.

Worn or damaged parts can also cause ejector problems. If any of the components of the ejector system are worn or damaged, it may need to be replaced.

In this case, it’s best to take your Browning Citori 725 to a professional gunsmith for repair.

Finally, ammunition issues can also cause ejector problems. Make sure you’re using the right type of ammunition for your shotgun and that it’s in good condition.

If the cartridges are damaged or deformed, they may not eject properly.

8. Magazine Issue

The magazine is a crucial part of a firearm that plays a vital role in holding and feeding ammunition to the chamber.

Specifically, for the Browning Citori 725 shotgun, the shooter must carefully load shells into the magazine before taking aim and firing.

However, like any mechanical component, magazines can experience issues or malfunction, and this can be frustrating for shooters.

Some common causes of magazine issues include improper loading, debris or dirt inside the magazine, and worn-out springs or followers.

If you are facing magazine issues with your Browning Citori 725, here are some steps you can take to fix the problem.

1. Ensure proper loading: Make sure that you are loading your shotgun’s magazine correctly.

The most common loading issues occur when the shells are not properly seated, or when the rounds are stacked incorrectly.

Check your owner’s manual for specific instructions on how to load the magazine.

2. Clean the magazine: Sometimes debris or dirt can accumulate inside the magazine, preventing the shells from feeding properly.

To fix this issue, disassemble the magazine and clean it thoroughly.

3. Replace worn-out components:

Over time, the springs and followers in your magazine may wear out or become damaged. If you notice that your shells are not feeding properly or that you’re having trouble loading the magazine, it might be time to replace these components.

What Do The User Think About Browning Citori 725 

Different users have different thoughts on the Browning Citori 725. Some find the gun’s design and performance to be praiseworthy, while others express less contentment with it.

Several users commented on the gun’s smooth and easy-to-use action, contributing to accurate shots.

Additionally, many appreciate the gun’s sleek appearance and ergonomic grip.

On the other hand, some users have experienced issues with the gun’s reliability and durability over time.

Others have noted that the recoil can be heavy, even uncomfortable, which detracts from the overall shooting experience.

Overall, opinions on the Browning Citori 725 seem to be divided.

While some users find it to be a reliable and accurate firearm, others have had mixed experiences with its performance and durability.

Regardless, it’s important to consider individual preferences and experiences when selecting a firearm, and the Browning Citori 725 may be a good option for those seeking a smooth and aesthetically pleasing shotgun.

3 Best Alternatives To Browning Citori 725

Suppose you’re in the market for a new over-and-under shotgun but want to explore options beyond the Browning Citori 725.

In that case, there are several top-notch alternatives that offer similar quality and performance.

Here are three of the best alternatives to consider:

1. Beretta 686 Silver Pigeon –

Widely regarded as one of the best shotguns on the market, the Beretta 686 Silver Pigeon has a reputation for impeccable quality and reliability.

It features a stunning walnut stock, a steel receiver, and a chrome-lined barrel for added durability and longevity. The Silver Pigeon also comes in a range of models to suit a variety of shooting needs and preferences, from sporting clays to upland hunting.

2. Winchester 101 –

The Winchester 101 is a classic over-and-under shotgun on the market for decades. It’s built from high-quality materials, including a steel receiver and a walnut stock, and features a sleek, understated design that’s timeless and elegant.

The 101 is also known for its exceptional balance and handling, which make it a pleasure to shoot.

3. CZ Redhead Premier –

Don’t overlook the CZ Redhead Premier if you’re looking for a more affordable alternative to the Browning Citori 725. It’s a well-made, reliable shotgun that’s built to last.

The Redhead Premier features a sturdy steel receiver, a handsome Turkish walnut stock, an adjustable trigger, and a smooth, reliable action. It’s a great choice for hunters and clay shooters alike.

Frequently Asked Questions

What is the barrel length of the Browning Citori 725?

The barrel length ranges from 26 to 32 inches.

Does the Browning Citori 725 have an adjustable trigger?

Yes, it comes with an adjustable trigger for personalized shooting preferences.

Does the Browning Citori 725 come with interchangeable choke tubes?

It comes with interchangeable choke tubes, allowing shooters to adjust their shot patterns.

What is the weight of the Browning Citori 725?

The weight of this gun is 8.5 pounds.

Conclusion

So, we have discussed some common problems with Browning Citori 725 and how to fix them.

If you have some knowledge and experience,, you can fix any issues yourself, but I highly recommend you take the help of a professional gunsmith or take your gun to the dealer if you don’t know what you are doing.

Better take help from the gun’s manual before repairing or fixing the problem.

Taking your gun to a certified gunsmith or service center for diagnosis, troubleshooting, and repairs is best. Attempting to fix it yourself could potentially cause further damage.