Citadel Boss 25 Problems And Their Solutions

The Citadel Boss 25 is a 12-gauge semi-automatic shotgun that has gained popularity among firearm enthusiasts due to its reliability, durability, and affordability.

This shotgun is designed for various shooting activities, including hunting, target shooting, and home defense.

Like any other firearm, the Citadel Boss 25 may encounter certain problems that can hinder its performance.

The common issues with Citadel Boss 25 which users reported are Feeding Problems, Cycling Issues, Failure To Eject, Accuracy Problems, Jamming Issues and Hammer Issues.

Citadel Boss 25 Problems

This blog aims to identify common problems Citadel Boss 25 owners face and provide effective solutions.

We will explore these issues in-depth and offer insights into potential causes and remedies.

Quick Overview Citadel Boss 25 Shotgun Specs

Specification Details
Gauge 12
Barrel Length 18.5 inches
Weight 8 pounds
Magazine Capacity 5+1
Finish Matte black
Stock Synthetic pistol grip with recoil pad
Sight Picatinny rail for optics
Choke Removable, interchangeable chokes

Common Citadel Boss 25 Problems And Their Solutions

1. Feeding Problems

One of the main causes of feeding problems is a dirty or worn-out shotgun. Over time, debris and residue can accumulate in the barrel, causing shells to get stuck or fail to feed properly.

Additionally, worn or damaged parts can prevent the mechanism from operating smoothly, leading to jams and misfeeds.

To fix feeding problems, start by cleaning your shotgun thoroughly. Use a solvent to break down any built-up residue, and then scrub the barrel and action with a brush.

Pay close attention to the feed ramp and chamber, often the most problematic areas.

After cleaning, inspect your semi auto gun for any signs of wear or damage. Replace any worn or damaged parts, particularly those that impact the feeding mechanism.

Another common cause of feeding problems is improper ammunition. Ensure you are using the correct gauge and length of the shell for your particular shotgun, and avoid using damaged or old ammunition.

It’s also important to ensure you are loading your gun correctly, with the shells facing the correct direction and seated fully in the chamber.

2. Cycling Issue

One of the most common causes of cycling issues is a dirty gun. The buildup of dirt, debris, and powder residue can cause the action to become sticky and slow.

Additionally, if the gun is not lubricated properly, it can cause friction, creating more cycling issues.

Another cause of Failure To Eject is a dirty or worn piston. The piston is a critical component of the gun, as it directs gas from the fired shell to the recoil spring, which then cycles the action. If the piston is dirty or worn, it may not function properly, failing to eject.

To fix these issues, ensure your piston is clean and debris-free. A dirty piston can be cleaned using a solvent and a stiff bristle brush. If your piston is worn, it may need to be replaced.

Another primary cause of cycling issues is the use of weak ammunition. The recoil cannot cycle the gun’s action when the cartridges lack power.

To fix cycling issues, the first thing you should do is clean the gun. Remove all dust, debris, and powder residue with an appropriate cleaning solvent.

After cleaning, lubricate your gun according to the manufacturer’s recommendations.

If cleaning does not solve the issue, you may need to address the ammunition you are using. Ensure that it has sufficient power to cycle the shotgun’s action.

It’s important to note that not all ammunition work appropriately with all firearms. Thus, it would be best if you were cautious to find compatible ammunition.

Lastly, you can consider replacing some parts of the gun to enhance its performance, though it is the last resort. Consult your manufacturer and ask their opinion for appropriate actions.

3. Failure To Eject

Many users reported that they are getting failure to eject issue on their Boss 25 shotugn after firing some rounds.

The failure to eject occurs when a shotgun cartridge fails to exit the chamber after firing. This can be due to various reasons, including weak ammunition, dirty shotgun parts, or a damaged extractor.

It can cause jams and misfires, which could be dangerous during complicated shooting scenarios.

There are many reasons why a gun can fail to eject, but the most common ones include weak ammunition, dirty shotgun parts, or a damaged extractor.

Weak ammunition can cause the shotgun to fail to eject because the recoil is not powerful enough to force the cartridge out of the chamber.

Dirty shotgun parts can also cause the shotgun to fail to eject as the dirt and grime can prevent smooth movement of the essential parts, leading to a malfunction.

A damaged extractor can also be responsible for failure to eject as the extractor is responsible for gripping the cartridge rim and pulling it out of the chamber.

To fix the issue of failure to eject, you must first examine the shotgun for dirt or damage that could be causing the malfunction.

Step-by-step cleaning and maintaining the shotgun can help ensure that the critical components are clean and free of dirt and grime.

Additionally, you can upgrade the shotgun with new and improved extractors or ammunition that can handle the recoil and ensure that the shotgun functions correctly.

4. Accuracy Problems 

One of the main causes of accuracy problems is improper sighting. This can happen when the sights on your shotgun are not properly aligned, making your shots off-target.

Another common cause is a loose barrel or action, which can cause the shotgun not to be properly aligned with the target.

To fix improper sighting, start by checking the alignment of your sights. If they are not properly aligned, adjust them until they are. If the sights cannot be adjusted, they may need replacing.

First, ensure that your shotgun is not loaded to fix a loose barrel or action. Then, tighten any loose screws or bolts on the barrel or action. If this does not fix the problem, then the shotgun may need to be serviced by a professional.

Another cause of accuracy problems is poor shooting technique. If you are not holding the shotgun properly or are not properly aiming, this can negatively affect your accuracy.

To fix this issue, practice proper shooting techniques, including holding the shotgun firmly, keeping your body and arms properly aligned, and aiming precisely.

5. Jamming Issue

One common cause of jamming is a dirty or improperly lubricated gun. Any foreign debris, moisture, or grit in the weapon can create resistance and stop shells from being ejected or loaded.

Additionally, worn-out components such as springs and extractors can also cause jamming. Inadequately sized ammunition or a damaged magazine can also be culprits of the problem.

Fortunately, there are several steps you can take to fix and prevent jamming in your shotgun. Firstly, ensure that you are using the correct ammunition and that it is not damaged or defective.

Cleaning and lubricating your shotgun following the manufacturer’s guidelines is also crucial. 

Check the springs, extractors, and magazines for any signs of wear and tear, and replace them as necessary.

And finally, practice proper maintenance, such as storing your gun in a dry and safe place, avoiding excessive heat, and handling it carefully.

6. Hammer Issue

A variety of factors can cause the hammer issue with shotguns. One possible culprit is worn or damaged hammer springs.

These springs can weaken over time, causing the hammer to strike with less force than necessary.

Another cause may be a dirty trigger group. Dirt and debris can accumulate in the trigger assembly, causing the hammer to stick or fail to release properly.

Fortunately, fixing this issue is relatively straightforward. If the problem is with the hammer springs, you may need to replace them.

This can be done by removing the trigger assembly from the shotgun, disassembling it, and replacing the worn springs with new ones. If the problem is with a dirty trigger group, the solution may be as simple as cleaning it.

7. Can’t get it to Budge

One potential cause for a shotgun action that won’t budge is a build-up of debris or rust in the mechanism.

This can impede the sliding of the action and make it difficult to operate.

Another culprit could be improper lubrication, which can cause the parts of the shotgun to stick together and prevent smooth movement.

Luckily, fixing a shotgun that won’t budge can often be done at home with little care and attention.

To address issues caused by debris or rust, thoroughly clean the shotgun with a solvent or degreaser.

Apply a generous amount of lubricant to the moving parts, being careful not to overdo it and cause excess buildup. 

If these steps don’t work, it may be time to consult an expert to diagnose and repair any deeper issues with your shotgun’s action.

With proper maintenance and care, you can keep your Citadel Boss 25 shotgun performing smoothly and reliably for years to come.

Frequently Asked Questions

What FPS is needed for Citadel Boss 25?

1,300 FPS or higher

Can you hunt with a Citadel Boss 25?


What choke comes in a Citadel Boss 25?
C, IC, M, IM, F


After reading the article, you know how to fix the issues with your Citadel Boss 25 issues. Following the instructions above, you can get your gun run again without any issues.

To fix the issues, you need some basic knowledge or learn it by watching videos on Youtube.

Related Posts:

CZ 1012 Problems

Girsan MC312 Problems

Stoeger M3000 Problems

Remington 11-48 Problems

Browning 2000 Problems

Rock Island VRPA40 Problems

Beretta A300 Ultima Problems