Common Beretta A400 Xtreme Plus Problems

The Beretta A400 Extreme is a powerful, versatile semi-automatic shotgun designed for hunting and shooting in extreme environments.

This shotgun boasts a 3 ½ inch 12 gauge chamber, allowing it to handle the largest and most powerful loads. It also comes with five extended Optima HP chokes, offering shooters a range of options to customize their shot patterns.

While the Beretta A400 Extreme is known for its durability and performance, it may encounter problems during use like any firearm.

This article will discuss these issues, their potential causes, and how to address them to keep your Beretta A400 Extreme operating smoothly.

Common Beretta A400 Xtreme Plus Problems

1. Cycling Problems

Cycling Problems in Beretta A400 Xtreme Plus are a major issue for many gun owners, as these issues can cause significant performance issues.

The most common cycling issue with the Beretta A400 Xtreme Plus is related to the gas system.

This semi-automatic shotgun uses a short-stroke piston powered by the pressure of burning gases from cartridges. When there is too much pressure on the short-stroke piston, it can cause excessive cycling and result in jams, misfires, and other performance issues.

To fix this problem, gun owners should check their ammunition types carefully and ensure they use the right type of shell for their particular gun. Proper lubrication and maintenance of parts are also important to ensure the reliable function of any firearm.

In addition to potential gas system issues, cycling problems can also be caused by improper recoil spring assembly or tension in its components.

To fix this problem, owners must disassemble the action to access all its components before resetting or replacing damaged parts as needed.

They should then reassemble the action and test-fire several rounds to ensure proper operation before use.

Cycling issues may be caused by a worn-out bolt stop or other worn components within the action mechanism.

To determine if this is an issue with your gun, you will need to disassemble it like previously mentioned and visually inspect each component for signs of wear or damage, such as scratches or corrosion on any part that looks worn out or damaged anyway. If so, replace those components before use, as necessary.

Cycling Issues in Beretta A400 Xtreme Plus can frustrate many gun owners due to its potential effect on shooting performance.

Still, thankfully, proper ammunition selection combined with regular maintenance and inspection of parts can go a long way toward ensuring the reliable function of your firearm.

2. Light strikes and failure to fire

One of the most common issues with Beretta A400 Xtreme Plus shotguns is light strikes and failure to fire.

Light strikes are typically caused by a weak or dirty firing pin or inadequate ignition of the primer in the cartridge.

This can sometimes be attributed to a worn-out or dirty firing pin spring, improper gas pressure settings, debris on the firing pin, an overly sensitive trigger, or even defective primers in cartridges.

To fix these issues, starting with the basics, such as cleaning and lubricating all parts of the shotgun can be beneficial. Special attention should be paid to the firing pin and firing pin spring which should be carefully inspected for dirt or damage.

These two components should be replaced immediately if any problems are identified.

Additionally, ensuring no obstructions from dirt or other debris in the barrel can help alleviate some light strike issues.

It may also be necessary to adjust certain settings on your shotgun depending on what type of ammunition is being used – different types of loads require different gas pressures for optimal performance.

Finally, using quality ammunition with reliable primers is important for consistent performance and less chance of light strikes occurring during use.

3. Double Feeding

Double feeding is a common issue among shotgun owners, especially those who own a Beretta A400 Xtreme Plus model.

This typically occurs when two shells are loaded into the chamber simultaneously, obstructing the gun from firing or ejecting shells properly.

The cause of double feeding in a Beretta A400 Xtreme Plus can vary. It could be due to an oversized shell being used, a broken part within the gun, or simply not pushing the shell far enough into the chamber before attempting to fire it.

Additionally, reloading too quickly or failing to properly position your hands on the forearm and trigger guard during loading may result in double feeding.

Fortunately, fixing this problem with your Beretta A400 Xtreme Plus is relatively simple. First and foremost, you should ensure all parts are functioning correctly and using the correct size shells for your firearm.

If double feeding persists, try slowing down when loading shells into the chamber and practice proper grip positioning on both hands with each reloading attempt.

If these methods fail to fix double feeding, you may need to consult a gunsmith and have them repair any broken components or adjust the sizing of internal parts if necessary.

4. Trigger Issues

Common trigger issues with the Beretta A400 Xtreme Plus include feed malfunctions, jamming, and difficulty ejecting shells.

Understanding why these trigger issues occur is important to accurately diagnose and fix the problem.

Feed Malfunction: One possible cause of trigger issues in the Beretta A400 Xtreme Plus is a feed malfunction.

This malfunction occurs when the action or bolt cannot properly extract spent rounds from the magazine or chamber, thus preventing new rounds from being fed into the chamber.

To fix this issue, you must check for any debris or obstruction in the magazine or chamber that may be causing the issue. Additionally, inspect all internal components of the firearm, such as springs and pins, for wear and tear that may be hindering the proper functioning of your gun’s action.

Jamming: Another major cause of trigger issues with the Beretta A400 Xtreme Plus is jamming.

Jamming occurs when a shell fails to properly enter the chamber due to a faulty extractor, worn springs within the firearm, improper lubrication of parts and components, or other mechanical problems.

To prevent jamming from occurring in your Beretta A400 Xtreme Plus, it’s important to regularly clean and lubricate your firearm before use and make sure all components are properly maintained and functioning as intended.

Additionally, inspect all internal components for wear and tear as this can lead to jams if not addressed promptly.

Difficulty Ejecting Shells: Lastly, some shooters may experience difficulty ejecting shells from their Beretta A400 Xtreme Plus due to an incorrect gas setting or worn out components such as extractors or ejectors within their firearm.

To address this problem properly, assess what gas settings should be used for the ammunition you use on your gun, then ensure all internal components are clean and well-lubricated before use.

If these steps are taken, but there is still no improvement in ejection performance, then have your gun checked by a qualified gunsmith who can identify any worn out parts needing replacement within your firearm.

5. Jamming Problems

Jamming in the Beretta A400 Xtreme Plus usually happens for several reasons.

Most commonly, jamming occurs when there is either an obstruction or deformity of the shell casing that prevents it from feeding correctly into the chamber.

In some cases, dirt or debris can block the casing from entering properly.

Common causes include worn-out action components, improper ammo selection, and faulty magazines.

Fortunately, you can take some simple steps to reduce the risk of jamming problems in your Beretta A400 Xtreme Plus gun.

The first step is to ensure that all internal parts, such as springs and pins, are kept clean and functioning properly.

Also, always use good-quality ammunition specifically made for your gun model; low-quality ammunition may not function properly with your particular firearm.

Finally, ensuring your magazine fits securely into place will help prevent jams caused by faulty magazines or incorrect loading techniques.

6. It Won’t Lock The Bolt Back

One of the most common causes of the bolt not locking back is an improper fit between the bolt and receiver.

This concerns the precise tolerances between these two parts and how they interact when cycling rounds to reliably lock back after loading a cartridge.

If these tolerances are off, then it could lead to a situation where the bolt does not properly engage with other components like the sears and disconnectors.

This can even happen if dirt or debris enters this area, as it may prevent proper engagement.

Another possible cause is that there may be issues with certain parts of the gun that prevent it from functioning correctly.

This could include broken or worn-out springs, pins, or levers that either aren’t doing their job properly or must be replaced.

Additionally, if you’ve recently changed out any internal parts such as trigger components, disconnectors, etc., those pieces may not have been installed correctly, which could result in a malfunctioning firearm.

Fortunately, there are several ways to address these issues should they arise.

The first step would be to ensure that all your components are clean and free of dirt or debris before attempting any repairs or replacements.

Next, you should examine your parts for any wear and tear or damage, indicating they need replacing.

Lastly, consider having a qualified gunsmith look at your firearm as they will have more experience diagnosing and fixing such problems quickly and efficiently so you can get back out shooting sooner rather than later.

Frequently Asked Questions

What is the difference between A400 Xtreme and Xtreme Plus?

The A400 Xtreme and Xtreme Plus shotguns differ in several respects.

The A400 Xtreme is an excellent semi-automatic shotgun with a 28” barrel, while the Xtreme Plus is an over-and-under model with 26” barrels.

The A400 Xtreme features an innovative self-cleaning gas piston, making it one of the most reliable and low-maintenance semi-automatic shotguns.

Meanwhile, the Xtreme Plus has a more traditional design, with a non-binding locking system for quick loading and unloading.

Both guns come equipped with Beretta’s Optima HP chokes, providing improved accuracy and pattern density at varying ranges and velocities. In addition to their different barrel lengths, the A400 Xtreme is slightly heavier than the Xtreme Plus, weighing 7 pounds versus 6 1/2 pounds, respectively.