ETS Glock Magazine Problems And Their Solutions

If you are a Glock owner and love shooting, then you are probably familiar with ETS Glock magazines.

These magazines have become increasingly popular amongst Glock enthusiasts because they are ergonomic, lightweight, affordable, and available in various capacities.

ETS Glock magazines Problems

However, ETS Glock magazines are prone to certain performance issues, as with any product.

Therefore, the purpose of this blog post is to provide you with solutions to common ETS Glock magazine problems that you may encounter.

Some common problems with ETS Glock magazine are Feeding Problems, Feed lip cracking  Problems, Jamming Issues, Tight Mag Well, Difficulty loading magazines, and Not Freely Dropping. 

Consequently, we have compiled some useful tips and tricks that can help you troubleshoot magazine issues when they arise.

So, whether you are a seasoned Glock owner or a beginner, we encourage you to read on and learn about some of the most common ETS Glock magazine problems and their solutions.

In addition, you can expect to read genuine reviews from other users.

Common ETS Glock Magazine Problems And Their Solutions

1. Feeding Problems

Have you ever experienced issues with your Glock magazine’s feeding mechanism? It can be an incredibly frustrating problem to deal with in the middle of a shooting session.

The good news is that most feeding problems can be fixed with a few simple steps.

So, what are some of the main causes for feeding problems with your Glock magazine?

One of the most common causes of feeding problems is incompatible ammunition.

Glock magazines are designed to work with specific types of ammunition, and using the wrong type can cause jams and misfeeds.

Another major cause of feeding problems is a dirty or corroded magazine.

Over time, the metal components of your magazine can become coated with dirt and debris, which can lead to misfeeds.

Magazine spring tension is another major factor in feeding problems.

If the spring is too weak, the rounds may not be pushed up into the chamber properly, leading to jams.

On the other hand, if the spring is too strong, it can cause the rounds to be pushed up too forcefully, leading to feeding issues.

Finally, magazine lip damage is a common problem that can cause misfeeds. This can occur over time as the lips of the magazine become worn or damaged.

So, how can you fix these common feeding problems with your Glock magazine? For incompatible ammunition, switch to a compatible type.

Clean a dirty or corroded magazine thoroughly with a cleaning solution and a nylon bristle brush.

For spring tension issues, you may need to replace the spring with a stronger or weaker one, depending on the problem.

Finally, you may need to replace the magazine entirely for magazine lip damage.

2. Feed Lip Cracking

This is a common problem that can impact the performance of your firearm. So, what exactly is feed lip cracking, and what causes it?

Feed lip cracking is a situation where the lips of your magazine break or crack due to various reasons.

This often results from material quality, rough handling or dropping, excessive heat exposure, design flaws, and wear and tear.

Inadequate material quality and weak construction of feed lips intensify the effects of impact stress, leading to cracking or breaking.

Rough handling or dropping of your magazines can also cause feed lips to crack.

Excessive heat exposure can lead to deformation of the feed lips, resulting in cracking and reducing magazine performance.

Design flaws compounded with stress can accelerate the process of feed lip cracking, rendering your magazines defective.

Wear and tear can also cause feed lips to crack over time, leading to unreliable ammunition feeding and potentially compromising your safety.

Identifying and addressing these issues is vital to keep your magazines in tip-top condition.

Fortunately, there are steps you can take to fix the problem.

To fix feed lip cracking, start by examining the extent of the damage. If the damage is mild, you can smooth out any burrs or rough edges using a fine-grit sandpaper or polishing wheel.

If the feed lips are severely damaged, the magazine’s only viable option might be a ETSe replacement.

3. Difficulty Loading Magazines

Many gun owners encounter this problem at some point in their shooting journey. But what causes difficulty in loading magazines?

And, more importantly, how can you fix it?

One of the main causes of difficulty loading magazines is weak magazine springs.

Over time, the springs lose their tension or become worn out, making loading rounds into the magazine hard.

Another issue that can cause difficulty loading is a faulty magazine follower.

The follower is responsible for pushing the rounds up into the feeding position.

When it becomes bent or worn, it can impede the movement of the bullets.

Dirt and debris can also cause issues with magazine loading.

When the magazine is not cleaned regularly, dirt and debris can accumulate in the feed lips, making it difficult for rounds to slide in smoothly.

Additionally, design flaws can lead to problems with loading magazines. Poorly designed magazines may have issues with the follower or feed lips, causing malfunctions during use.

Lastly, wear and tear can cause problems with magazine loading.

With frequent use, the magazine’s springs, followers, and feed lips can experience wear and tear, impacting the magazine’s ability to maintain proper tension and feed rounds.

So, how can you fix these issues?

First and foremost, cleaning your magazine regularly to remove any dirt or debris is essential.

Secondly, replace weak magazine springs and faulty followers. If you notice any magazine design issues, consider replacing the magazine with a higher-quality option.

Lastly, if your magazines are experiencing significant wear and tear, consider purchasing new magazines altogether.

4. Jamming Issue

Jamming is a common and frustrating problem that can occur for various reasons.

So, what causes jamming issues in Glock Ets magazines?

One possible cause is using low-quality ammunition. Cheap or defective rounds can cause feeding problems and contribute to jams. Another potential culprit is magazine springs that have weakened over time.

Additionally, dirty or improperly lubricated magazines can impede the smooth movement of the ammo and lead to jams.

Luckily, there are steps you can take to fix these jamming issues.

First and foremost, always use high-quality ammunition from reputable manufacturers. Regularly clean and lubricate your magazines, ensuring all parts are free from dirt and debris.

Take care not to overfill the magazine, as this can cause jams.

And if you suspect that your magazine spring is worn out, consider replacing it with a new one.

By using high-quality ammunition, regularly cleaning and lubricating your magazines, and monitoring your magazine springs, you can help ensure a smooth and successful shooting experience with your Glock magazine.

5. Tight Mags Well

This can be caused by several factors, such as a misaligned frame or debris in the mag well.

Fortunately, there are steps you can take to fix this issue.

First, ensure that your firearm is unloaded and cleared of any ammunition.

Then, look closely at the mag well to see if any debris or obstruction hinders the mags from properly seating. If so, remove the obstruction with a soft-bristled brush or cloth.

If the mag well is clean and the problem persists, try applying a small amount of lubrication to the inside of the mag well and magazine.

This can help the magazine slide in and out more smoothly.

Another potential culprit is a misaligned frame.

To check for this, take a straight edge or ruler and lay it flush against the bottom of the grip, making sure it extends past the mag well.

If there is a gap between the straight edge and the mag well, the frame may be misaligned and need to be adjusted by a gunsmith.

Fixing a tight mag well issue may require a bit of trial and error, but with these steps, you can hopefully get your Glock functioning smoothly once again. Remember always to handle firearms safely and follow proper cleaning procedures.

6. Follower Tilt

Follower tilt is the misalignment of the follower in the magazine, which can cause feeding problems and malfunctions.

This issue can be common with certain magazines, including the ETS Glock Magazine.

So, what are the main causes of follower tilt?

Typically, it is caused by poorly designed or improperly manufactured followers or inadequate magazine springs that cannot provide the necessary force to maintain proper alignment.

Additionally, wear and tear over time can also contribute to this issue.

Luckily, there are steps you can take to fix this issue. First, remove the magazine from your firearm and disassemble it.

Then, inspect the follower and magazine spring for any signs of damage or wear.

If either is damaged or worn, replace them with new parts. Next, use a magazine follower tool or a wooden dowel to center the follower properly and ensure it remains in the correct position.

Finally, reassemble and test the magazine to ensure proper feeding and function.

7. Not Freely Dropping

Some users report that the ets magazine are not dropping freely, particularly from the users of Glock 19 and Glock 17.

The cause of a magazine not dropping freely can vary, but some of the main reasons include a faulty release button, worn-out magazine catch, or a misaligned magazine.

When the magazine catch becomes worn, it can cause the magazine to stick in place, preventing it from dropping freely.

Similarly, a faulty release button can cause this issue, especially if it fails to release the magazine.

Fortunately, you can take a few simple steps to fix this problem. Firstly, try cleaning the magazine release button and the magazine catch.

Use a lubricant to clean and polish these parts, ensuring the magazine’s smooth release and retention. Secondly, inspect the magazine catch for wear and tear.

If it appears damaged, replace it with a new one to ensure your magazine’s secure and functional fit.

Lastly, ensure the magazine is properly aligned and seated in the magazine well.

A misaligned magazine can cause it to catch on the mechanism, which will in turn, prevent it from dropping freely.

What Do The User Think About ETS Glock Magazine

As per some user reports, there have been instances where certain individuals have experienced issues with ETS Glock magazines, citing problems with locking mechanisms, sticky springs, and other related concerns.

These difficulties have caused some to perceive the product’s quality and reliability negatively.

However, it is imperative to highlight that there are also users who have had positive experiences with the ETS Glock magazines. Many users have praised the magazines for their dependability and sturdiness, deeming them of excellent quality.

It is important to note that incidents of malfunction can occur with any product, and it is possible that the negative feedback may reflect only a small fraction of the entire user base.

It is also important to acknowledge that the positive feedback suggests that ETS Glock magazines are meeting or exceeding the expectations of many of their users.


3 Best Alternatives To ETS Glock Magazine 

We understand that you are looking for alternatives to the ETS Glock Magazine, and we appreciate your interest in our expertise.

After thorough research and analysis, we recommend the following three options that may fit your requirements and exceed your expectations:

1. Magpul PMAG Glock Magazine:

These magazines are made of advanced polymer for durability and light weight.

They have a high visibility follower and an efficient floorplate design for fast and easy reloads.

Additionally, they have a corrosion-resistant stainless steel spring for consistent feeding and long-lasting performance.

2. Glock OEM Magazine:

These are the original factory magazines designed and tested by Glock for optimal compatibility and reliability with their pistols.

They are made of reinforced polymer and offer a consistent fit and finish. With various capacities and configurations available, you can choose the one that suits your needs.

3. ProMag Glock Magazine:

These magazines are engineered to provide reliable performance and affordability. They are constructed of high-quality polymer with impact-resistant baseplates and heat-treated chrome silicon wire springs for smooth and consistent feeding.

Moreover, they have a lifetime warranty against manufacturer defects and can hold up to 32 rounds.

We hope this information helps you make an informed decision. If you have any further questions or concerns, please do not hesitate to contact us.

Is ETS Glock Magazines or Magpul better?

Let me start by acknowledging that both are excellent products, with unique features and advantages.

When it comes to ETS Glock Magazines, they are famous for their durable construction, high reliability, and consistent performance.

ETS Glock Magazines are made from advanced polymer materials, which make them resistant to impact, corrosion, and extreme weather conditions.

Furthermore, these magazines have a unique design that allows for a higher round count, giving you more firepower when you need it the most.

Additionally, the translucent body of ETS Glock Magazines permits quick and easy visual checks of the remaining rounds.

On the other hand, Magpul magazines are known for their lightweight, making them ideal for range shooting and training.

They are made of high-quality polymer materials, which provides excellent durability and reliability.

Besides, the Magpul magazines have a unique gripping surface, which gives you more control and comfort during shooting. Magpul magazines are also compatible with a wide range of firearms, including Glock, AR-15, and AK-47.

Frequently Asked Questions

What kind of Glock models are compatible with ETS magazines?

ETS magazines are compatible with all generations of Glock models, including the popular Glock 19 and Glock 17.

How many rounds can ETS Glock magazines hold?

From 17 to 31 rounds, depending on the model and caliber.

Are ETS Glock magazines made from high-quality materials?

Yes, made from advanced polymer materials that are durable, reliable, lightweight, and impact-resistant.

How reliable are ETS Glock magazines?

Glock magazines are known for their reliability, feeding smoothly and consistently without failure.


it is important to address and prevent ETS Glock magazine problems.

The ETS Glock magazine has been known to have issues with feeding properly, which can result in malfunctions or even dangerous situations.

Glock owners must be aware of these issues and take steps to prevent them from occurring.

One way to prevent ETS Glock magazine problems is to maintain and clean the magazines regularly. This can help prevent dirt and debris from building up, leading to feeding issues. Additionally, using high-quality ammunition can also help to prevent malfunctions.

We encourage our readers to share their tips and experiences with ETS Glock magazines in the comments below.