Common Glock 26 Gen 5 Problems and Their Solutions
The Glock 26 Gen 5 is popular among gun enthusiasts for its compact size, reliable performance, and versatility.
However, like any firearm, it may experience certain problems that can affect its performance and safety.
In this article, we will discuss some common Glock 26 Gen 5 problems that gun owners may encounter and provide practical solutions to address them.
Common Glock 26 Gen 5 Problems and Their Solutions
Contents
So, let’s dive into the world of Glock 26 Gen 5 and learn about the problems and their solutions in detail.
1. Failure to Feed
Have you ever been out shooting with your Glock 26 gen 5 and experienced failure-to-feed issues?
This common malfunction can be frustrating and potentially dangerous, leading to misfires and stovepipes.
But what are the causes behind the failure to feed, and how can they be addressed?
One possible cause of failure to feed in the Glock 26 gen 5 is incorrect ammunition selection.
The firearm utilizes a proprietary 9x19mm Parabellum round, meaning that other types of ammo will not properly perform in the gun.
Additionally, due to its design specifications, certain brands of ammunition may function better than others. Testing different types of ammo before heading out for a day of shooting is important.
Another potential cause of failure to feed issues in a Glock 26 gen 5 is an over-lubed action.
Too much lubricant on any moving parts can cause gunpowder residue buildup, interfering with the chambering process. Ideally, all moving components should be kept clean and lightly lubricated – thoroughly wipe off any excess oil after cleaning or field stripping your firearm.
Finally, magazine spring tension could also be responsible for failure to feed issues with the Glock 26 gen 5.
Magazine springs tend to weaken over time as they are repeatedly compressed during reloading procedures; this weakening can reduce their recoil force, causing malfunctions when loading rounds into the chamber.
To fix this issue, it is recommended that you replace the magazine springs every five thousand rounds or so (or more frequently, depending on how often you shoot).
2. Failure To Eject
An improperly adjusted extractor is one of the most common causes of failure to eject in Glock 26 Gen 5.
If the extractor is not adjusted correctly, it may cause the slide not to lock back when empty or for the spent casing not to be successfully ejected from the firearm.
Another common cause of failure to eject is due to improper lubrication. If the firearm has insufficient lubrication, it can cause friction, preventing the slide from cycling properly.
Lastly, recoil spring tension can also affect how well your pistol functions; if it is too weak or too strong, it can prevent proper slide cycling.
When troubleshooting your Glock 26 Gen 5, it’s important to identify and address each possible issue one at a time.
Here are some steps that you should take when attempting to solve failure-to-eject problems:
- First and foremost, make sure your Glock 26 Gen 5 is adequately lubricated according to the manufacturer’s instructions;
- Verify that your extractor has been properly adjusted;
- Inspect all components for any signs of wear or damage;
- Check and adjust recoil spring tension as necessary;
- Test fire several rounds through your gun after making adjustments; and
- Consult with a qualified gunsmith if needed.
These simple steps can help ensure that your Glock 26 Gen 5 functions optimally with minimal problems.
3. Chambering Problems
Chambering issues can be caused by many factors, including faulty magazines, ammunition that is too long or too short, incorrect installation of recoil springs, malfunctioning extractors and ejectors, and incorrect positioning of the slide lock lever.
Fortunately, these issues can often be resolved with a few easy steps.
The first step in diagnosing chambering problems is to inspect the magazine. Make sure that the magazine is clean and free from dirt or debris that could interfere with its operation.
You should also examine the spring for signs of wear or rust; if there are any problems, replace the magazine before proceeding further.
The next step is to ensure the ammunition being used is compatible with your Glock 26 gen 5 by checking its length and diameter.
If it does not meet specifications for either of these measurements, do not attempt to use it as it could cause serious damage or injury when fired.
Once you have verified that the magazine and ammunition are appropriate for your gun, it is time to check the recoil spring assembly.
Disassemble your gun and inspect all parts for signs of corrosion or damage; if any components appear to be worn or broken, replace them immediately.
After reassembling it correctly, test fire several rounds to see if the issue has been resolved; if not, you may need to disassemble it again and double-check that each part is installed correctly before continuing further tests.
Finally, make sure that both the extractor and ejector are functioning properly, as they play an important role in ensuring successful chamberings every time a round is fired from your Glock 26 gen 5 gun.
They must be replaced if either appears damaged or worn before further testing can occur.
4. Trigger Problems
One common cause of trigger problems is wear on the firing pin safety spring. This spring helps keep the firing pin from prematurely striking the primer when no trigger pull is applied.
As it wears down with use, it can cause erratic or light strikes that result in misfires or other issues.
To replace a worn firing pin safety spring, first remove the slide from the frame and remove the firing pin assembly.
Disassemble it completely and inspect for signs of wear on any parts. Replace any parts showing wear before reassembling and reinstalling the gun frame.
Another potential cause for trigger issues is an improperly lubricated firearm.
When using solvents or oils during cleaning and maintenance, make sure only to apply lubrication where recommended by your owner’s manual or manufacturer’s specifications; too much lubrication can cause dirt, dirt particles, or debris to build up inside the gun, which can lead to misfires or other problems when trying to fire it.
Always make sure that all parts are adequately cleaned and lightly lubricated before reassembly.
Finally, another possible cause of trigger malfunctions is improper installation or adjustment of certain parts such as recoil springs or guide rods.
Improperly installed springs can increase pressure on internal components, leading to malfunctioning triggers; always ensure that springs have been properly installed according to manufacturer specifications.
Additionally, if a trigger job has been done on your gun, double-check all adjuster screws for proper torque settings before use; if they are too tight, they can also lead to malfunctions when shooting your pistol.
5. Stove Piping Problems
Stove-piping occurs when the spent cartridge is improperly ejected and stuck in the chamber. This can lead to multiple issues such as failure to feed and misfires, resulting in a malfunction of the firearm.
So, what causes stove-piping problems in Glock 26 gen 5, and how can it be fixed?
One of the primary causes of stove piping issues in Glock 26 gen 5 is an overly tight extractor tension. The extractor on a Glock pistol is responsible for pulling out spent cartridges from the chamber after firing.
If the extractor tension is too tight, then it will cause excessive force on the cartridge which can cause it to become caught up inside the chamber as it is ejected.
Another potential cause of stove piping problems in Glock 26 gen 5 is improperly loaded ammunition.
Weak or deformed rounds may not have enough power to fully eject after firing, resulting in them becoming stuck in the chamber or failing to feed into the barrel completely.
Additionally, using nonstandard rounds with incorrect diameters could also result in this issue due to fitment concerns.
Finally, debris buildup inside of the firearm’s mechanism can lead to stove-piping issues due to increased friction or drag between components that could be counter productive while attempting to eject spent cartridges.
To fix these problematic issues, several steps need to be taken:
Firstly, ensure that all factory specifications are followed when loading ammunition into the firearm;
Secondly, inspect your firearm regularly for signs of wear and tear or any visible signs of debris buildup;
Thirdly, ensure that you are consistently clean and lubricate your gun properly; fourthly, adjust your extractor tension if necessary; and finally, ensure that any other components (such as recoil springs) are replaced if necessary for optimal performance.
6. Failure to Return to Battery
One of the most common causes of failure to return to battery is a build-up of fouling on the slide rails or within the pistol’s action. When fouling accumulates,
it can inhibit the slide’s ability to fully lock back into place during the firing cycle, resulting in a jam.
Cleaning and lubricating the slide rails regularly will help reduce the accumulation of fouling and should be done at least every 500 rounds or so.
Another factor that can cause a failure to return to the battery is an excessively tight extractor claw.
If the extractor claw is too tight against its mating surface, it can prevent proper engagement with the rim of a cartridge, leading to a failure to return to the battery.
To check if your extractor claw is too tight, remove it from the slide assembly and flex it outward with your thumb or fingers. If excessive force is required for adequate flexing, then it should be adjusted accordingly.
Finally, weak recoil springs can impede a successful return-to-battery cycle in Glock 26 Gen 5 pistols.
Weak recoil springs increase muzzle flip due to their inability to properly contain and control gas pressure generated by each fired round, meaning more time spent recovering from muzzle flip rather than completing the firing sequence as quickly as possible.
Replacing weak recoil springs with stronger ones may improve performance and reduce malfunctions related to failure to return to the battery.
7. Jamming Problems
One of the most common causes of jamming in Glock 26 Gen 5 pistols is an obstruction in the barrel or chamber.
This could be caused by dirt, gunpowder residue, or other foreign material lodged inside the weapon.
f you have been using your pistol for extended periods without cleaning it properly, this could be a major cause of jamming.
To diagnose whether a clog is causing your jamming issue, you can use a bore light to look into the barrel and chamber.
If you see any foreign matter or residue inside that could prevent the bullet from exiting properly, clean and lubricate your weapon before trying again.
Another cause of jamming in Glock 26 Gen 5 pistols is insufficient lubrication.
Often people do not realize how important proper lubrication is for their firearms and neglect to regularly oil them up.
Not only can insufficient lubrication cause jams, but it can also lead to more serious issues, such as increased wear and tear on moving parts and potential rusting or corrosion over time.
To avoid this problem, make sure that you regularly check all exposed metal parts and apply a few drops of oil wherever necessary before each shooting session.
Finally, another possible cause of jamming in Glock 26 Gen 5 pistols could be due to improper ammunition selection or faulty ammunition being used within the weapon itself.
Always ensure that any ammo purchased for use in your pistol meets all safety regulations and specifications as stated by your local laws and Glock’s requirements before loading it into the magazine or chambering a round from it in your pistol.
It’s also strongly recommended that, if possible, try out different types of ammo before settling on one brand for regular use since different factory loads may perform differently under various environmental conditions or even in various firearms themselves depending on their design features which may affect reliability during firing sequences significantly so always double-check first!
Now that we have discussed some of the most common causes behind jams occurring with Glock 26 Gen 5 pistols, let us take a look at exactly how to fix them:
- Clean any dirt/residue from the barrel/chamber with solvent & brush;
- Apply fresh lube/oil onto any exposed metal parts;
- Ensure correct ammunition type & quality is used;
- Make sure the barrel/slide is free from obstructions;
- Make sure the magazine spring & follower are fully functional;
- Verify firearm safety mechanisms are working correctly;
- Try dry firing (without live rounds loaded).
If all else fails, attempt to adjust the recoil spring tension accordingly until desired reliability results are obtained through trial & error methods (if applicable).
8. Slide Hard to Rack
Many Glock owners experience this issue, and it can be incredibly frustrating. Fortunately, there are a few possible causes and fixes for this problem.
The first cause could be worn on the locking block pins due to excess friction as the slide moves back and forth.
This is caused by a buildup of dirt, debris, and oil, which can cause wear on the pin surfaces and make it difficult to move the slide correctly.
Disassemble your firearm and remove any dirt or debris inside the receiver using a soft brush and gun cleaning solution to fix this issue.
After that, lightly lubricate all moving parts with a quality gun lubricant such as CLP (cleaner/lubricant/protectant). Reassemble your firearm once you’ve finished cleaning it.
Another common cause of slide hard to rack in Glock 26 Gen 5 is failure to lubricate all moving parts with a high-quality lubricant properly. Poor lubrication leads to excessive friction between metal parts which makes movement difficult.
To fix this issue, disassemble your firearm completely and reapply a light coating of quality gun lube on all moving parts before reassembling your firearm again.
The third potential cause is the incorrect alignment of the locking block pins, preventing them from engaging in the groove cut into the frame when cycling the action normally.
To fix this issue, first, confirm that the pins are aligned properly by removing the slide from your frame and then checking that each pin is centered in its hole on both sides of the frame rails.
Then reattach your slide onto your frame, ensuring that each pin is properly aligned before cycling it again to verify the smooth movement of your slide and no binding when pulling back or pushing forward on it from either side.
Finally, if none of these solutions have worked for you yet, double-check that there are no broken or worn-out parts inside your receiver, as these can also hinder the normal functioning of your Glock 26 Gen 5’s components resulting in harder-than-normal racking motions when cycling its action manually.
If any broken or worn out part needs replacing, do so immediately after ordering genuine replacement parts; otherwise, ensure all other components are properly fitted into place, then test fire safely at an approved firing range before carrying with confidence again!
Frequently Asked Questions
Is Glock 26 reliable?
The Glock 26 is one of the most widely used handguns around the world. It has been praised for its reliability, accuracy and ease of use, making it a popular choice for law enforcement, military and civilian shooters alike.
What is different about the Glock 26 Gen 5?
The Glock 26 Gen 5 is the latest generation of the Glock 26 pistol. It has numerous enhancements, including the Marksman Barrel for increased accuracy, a flared mag well for faster reloads, an ambidextrous slide stop lever, an nDLC finish for increased corrosion resistance, a reversible magazine catch, and a modular backstrap system for increased comfort and customization.
The Gen 5 features a Glock Night Sight setup and an improved trigger pull.
How much does a Glock 26 Gen 5 weight loaded?
26.10 ounces
How big is a Glock 26 Gen 5?
The Glock 26 Gen 5 has an overall length of 6.41 inches and a barrel length of 3.42 inches. The width of the pistol is 1.18 inches, and it has an unloaded weight of 17.95 ounces.
