LYNX 12 Shotgun Problems And Their Solutions

Have you ever been in a situation where your LYNX 12 shotgun malfunctioned at the most crucial moment?

LYNX 12 Shotgun Problems

Whether you’re using it for home defense or competitive shooting, encountering problems with your shotgun can be frustrating and potentially dangerous.

But don’t worry, because, in this blog post, we’ll be discussing the most common LYNX 12 shotgun problems and their solutions.

The common problems with LYNX 12 shotgun are Failure To Feed, Failure To Eject, Misfires, Short stroking, Magazine Problems, Jamming Problems, Recoil Spring Problems, and Trigger Reset Problems.

So, whether you’re a seasoned shooter or just starting, this guide will provide you with the knowledge and confidence you need to handle any issues that may arise with your LYNX 12 shotgun.

Get ready to learn how to keep your shotgun running smoothly and safely, no matter what challenges you may face.

LYNX 12 Shotgun Problems And Their Solutions

1. Failure To Feed

Are you having issues with your LYNX 12 Shotgun? Specifically, are you experiencing a Failure To Feed problem? Don’t worry, you’re not alone!

This is a common problem among shotgun owners, but fortunately, it’s an easy fix!

The reason for Failure To Feed can often be traced back to a dirty magazine or a damaged magazine spring.

A dirty magazine can cause the shells to not properly align with the chamber, leading to failures to feed.

A damaged magazine spring, on the other hand, can cause the shells to not be pushed up properly into the chamber.

So, how can you fix this problem? Here are some step-by-step instructions:

  1. First and foremost, make sure your shotgun is unloaded and the safety is engaged.
  2. Remove the magazine from the shotgun.
  3. Disassemble the magazine by removing the baseplate.
  4. Remove the magazine spring and follower from the magazine tube.
  5. Clean the magazine tube and follower with a brush and some cleaning solvent.
  6. Replace the magazine spring if it appears to be damaged, worn out, or weak.
  7. Reassemble the magazine and load it with shells.
  8. Test the shotgun for proper feeding by cycling through several rounds.

And there you have it!

Following these simple steps should fix your Failure To Feed problem and have your LYNX 12 Shotgun working perfectly again in no time.

So get out there, dust off that shotgun, and get back to shooting!

2. Failure To Eject

It can be frustrating when your firearm fails to function properly, especially when you need it most. However, the good news is that this issue is fixable and can be done in a few simple steps.

The reason for a failure to eject typically results from improper or irregular maintenance of the shotgun.

Over time, the buildup of dirt, debris or lack of lubrication can cause mechanical problems, causing the shell to get stuck in the chamber.

Fortunately, there are steps you can take to prevent this from happening and how to fix the issue.

Step 1: Inspect the shotgun thoroughly. Look for debris buildup, rust, corrosion or any other factors that could be causing the failure to eject.

Step 2: Take apart the shotgun and ensure that all the parts are clean and lubricated. This includes the chamber, bolt carrier group, and gas piston.

Step 3: If cleaning and lubrication do not fix the problem, it may be necessary to replace parts such as the extractor, ejector, or recoil spring.

Always remember to follow the manufacturer’s guidelines when replacing parts.

Step 4: Once the necessary repairs have been made, it is essential to test the shotgun to ensure that it is functioning properly.

3. Misfires

Misfires are a common problem that can happen to any firearm owner, but luckily, it can be fixed with some simple steps.

The most common reason for misfires is a lack of maintenance, which can cause dirt and debris to build up in the firing pin and chamber, leading to malfunctioning.

To fix this, start by cleaning your shotgun regularly and thoroughly. Use the right cleaning agents and tools. Make sure to follow the manufacturer’s instructions and safety precautions.

Another reason for misfires could be an incorrect assembly or disassembly of the shotgun.

If you’re not familiar with the proper disassembly and assembly process, refer to the manufacturer’s instructions or seek help from a qualified gunsmith.

It’s crucial to ensure that all parts are correctly assembled and secured, especially the firing pin and spring.

The ammunition you’re using could also be the culprit for misfires. Low-quality or old ammunition can cause misfires or weaken the performance of the firearm.

Make sure you use ammunition that is compatible with the LYNX 12 shotgun, and it’s recommended to use factory-manufactured ammunition.

Lastly, a worn-out or damaged firing pin or spring can cause misfires. If you suspect any wear or damage, contact a qualified gunsmith and have it replaced.

4. Short Stroking

Short stroking is a frustrating problem as it disrupts the smooth functioning of your firearm.

This issue can be caused by insufficient cycling of the action, which can occur when the user fails to rack the shotgun with enough force, or when the shotgun is not properly cleaned and lubricated.

Fortunately, fixing short stroking on your LYNX 12 shotgun is a straightforward process. By following these simple steps, you can quickly get your shotgun back to peak performance:

Step 1: Remove the magazine from the shotgun and clear any existing rounds. Always ensure that the weapon is unloaded before proceeding.

Step 2: Disassemble the shotgun and clean it thoroughly. Pay attention to the action and ensure that it is free from debris and dirt. Clean the piston and gas system, as these are the key components involved in cycling the action.

Step 3: After cleaning, lubricate the shotgun using high-quality gun oil. Be sure to add ample amounts of oil to the action and piston, ensuring optimal movement during cycling.

Step 4: Assemble the shotgun carefully, ensuring that all components are securely fastened. Replace the magazine and rack the shotgun several times, making sure that it cycles smoothly and without issue.

Step 5: Test the shotgun by firing it. If short stroking persists, repeat the above steps until the issue is resolved.

5. Magazine Problems

Many gun enthusiasts have faced this frustrating issue, but luckily there are ways to fix it.

One reason for magazine problems could be a faulty magazine spring or follower.

These parts need to be in proper working condition to ensure the smooth feeding of ammunition into the chamber.

Another reason could be a worn-out or damaged magazine feed lip. This can cause rounds to not properly feed into the chamber or even cause rounds to get stuck in the magazine.

So, how can you fix these issues step by step?

First, disassemble the magazine and inspect the spring and follower for any damage or wear.

Replace these parts if necessary. Next, inspect the feed lip for any damage or wear.

If there is damage, replace the magazine or have a gunsmith repair it. If the feed lip just needs to be reshaped, use pliers or a vice to gently reshape it.

It is also important to make sure that you are using the correct ammunition for your LYNX 12 shotgun. Using the wrong ammo can cause feeding issues and damage to your firearm.

6. Jamming Problems

Jamming can occur due to a variety of reasons, but the most common ones are dirty or worn-out parts or incorrect ammunition being used.

Fortunately, fixing this issue is easy and can be done in just a few steps.

Step 1: Disassemble the shotgun

The first step to fixing jamming problems with your LYNX 12 shotgun is to disassemble it.

Make sure to unload the shotgun and remove the magazine, then take it apart carefully following the manufacturer’s instructions.

Step 2: Clean the parts

Once you have disassembled the shotgun, clean each part thoroughly using a gun cleaner and a cleaning rod.

Pay extra attention to the chamber, bolt, and gas system as these are the areas most prone to dirt and debris buildup.

Step 3: Check for worn-out parts

After cleaning the parts, check for any worn-out or damaged parts.

This may include the extractor, ejector, or feed ramp. Replace any damaged parts with new ones to prevent further jamming problems.

Step 4: Use the correct ammunition

Using incorrect ammunition can cause your LYNX 12 shotgun to jam. Make sure to use the correct ammunition that is recommended by the manufacturer.

Step 5: Lubricate the parts

Once you have cleaned and inspected the parts, apply a generous amount of gun lubricant to each part before reassembling the shotgun.

This will help reduce friction and prevent further jamming problems.

7. Recoil Spring Problems

The main reason for recoil spring issues is simply wearing and tear. Over time, the spring loses its tension and becomes less effective at absorbing the recoil. This can cause malfunctions, misfeeds, and even damage to your gun.

But don’t worry! You can easily fix this issue yourself in just a few simple steps. First, you’ll need to purchase a replacement recoil spring. They’re easily found at most gun stores or online retailers.

Next, disassemble your shotgun according to the manufacturer’s instructions, being sure to remove the broken or worn recoil spring.

Carefully insert the new spring in its place, making sure it’s seated properly.

Finally, reassemble your shotgun and test fire it to make sure everything is working properly. Congratulations! You’ve just fixed your recoil spring problem and can now enjoy your LYNX 12 shotgun once again.

8. Trigger Reset Problems

Trigger reset issues are common among LYNX 12 Shotgun users, but fortunately, there are steps you can take to fix the problem.

The reason for trigger reset problems is that the shotgun’s trigger mechanism may not be returning to its original position after a shot is fired.

This can be caused by a variety of factors, such as a dirty or worn trigger mechanism or improper assembly of the shotgun.

To fix the issue, follow these steps:

  1. Disassemble the shotgun and clean the trigger mechanism thoroughly with a solvent and wire brush.
  2. Check the trigger spring and make sure it is intact and in the correct position.
  3. Reassemble the shotgun properly and test fire it to ensure the trigger is resetting properly.
  4. If the issue persists, consider replacing the trigger mechanism altogether, or seek professional assistance from a gunsmith.

By following these steps, you can ensure that your LYNX 12 Shotgun’s trigger mechanism is functioning properly and guarantee that you have a reliable and safe firearm.

Is the Lynx 12 Any Good?

The Lynx 12 is generally considered a good shotgun, with many users praising its reliability and durability.

It is a semi-automatic shotgun that is based on the AK-47 platform, which is known for its ruggedness and simplicity.

However, like any firearm, the Lynx 12 has its strengths and weaknesses, and whether it is “good” or not depends on the individual user’s needs and preferences.

It is always important to do thorough research and testing before making a decision on a firearm purchase.

Frequently Asked Questions

How long is the Lynx 12 barrel?

The Lynx 12 barrel is 18.6 inches long.

Who makes Lynx shotgun?

The Lynx shotgun is made by the Russian company Kalashnikov Concern.

What is the magazine capacity of the Lynx 12?

The Lynx 12 has a standard magazine capacity of 5 rounds, but it can be modified with larger aftermarket magazines.

What is the effective range of the Lynx 12?

The effective range of the Lynx 12 depends on factors such as ammunition and user skill, but it is generally considered to be within 50-75 yards.


As we wrap up this detailed analysis of LYNX 12 Shotgun problems and the viable solutions to each one of them, it is quite interesting to explore a unique perspective on the matter that will certainly be thought-provoking for all our readers out there.

Shotguns are without a doubt, a popular choice among many firearm enthusiasts for various reasons, including their versatility and manageable recoil.

However, despite their popularity, shotguns like the LYNX 12 are not immune to issues and malfunctions that might hinder their performance and effectiveness.

But here’s the fascinating twist: what if these “problems” were viewed as opportunities? What if a few modifications here and there could transform your LYNX 12 shotgun into the perfect shotgun for your specific needs?

Yes, these issues might bring frustrations and delays, but in the grand scheme of things, they’re not really problems as much as they are opportunities to personalize and optimize your LYNX 12 shotgun for your shooting objectives.

That is what differentiates a master shooter from an amateur.

They see the potential in their equipment and make adjustments as needed, instead of treating malfunctions as a setback.

By troubleshooting, modifying, and customizing their LYNX 12, they make it their own and turn it into a tool that works in harmony with their unique style and needs.