Mossberg MVP Scout Problems And Their Solutions
If you’re a gun enthusiast, then you’ve definitely heard of the Mossberg MVP Scout rifle. This weapon is known for its accuracy and reliability, making it a popular choice among hunters and shooters alike. However, with any piece of equipment, there are bound to be some issues that arise over time.
In this article, we’ll discuss some common problems that Mossberg MVP Scout shooters reported and provide solutions to help you keep your rifle in top condition.
The most common issue reported by the shooters include Feeding Issue, Magazine Release Issue, Heavy Trigger, Stiff Bolt , Sight Alignment and Light Primer Strikes.
Quick Overview of Problems And Solutions
Contents
Problem | Solution |
---|---|
Feeding Issue | Clean the rifle and use different ammo |
Magazine Release Issue | replace the mag with a new one |
Heavy Trigger | Hydrostatic power |
Stiff Bolt | Lubricate the barrel |
Sight Alignment | Adjust the scope and practise shooting more |
Light Primer Strikes | Adjust the firing pin or replace it |
Common Mossberg MVP Scout Problems And Their Solutions
1. Feeding Issue
One common problem you may encounter with your Mossberg MVP Scout rifle is a cartridge feeding issue. This can be quite frustrating if you’re out hunting or at the range and your rifle consistently fails to feed rounds properly.
The good news is that this issue can usually be easily solved with some troubleshooting.
Possible Solutions:
- First, make sure that the magazine is inserted correctly and fully seated. Sometimes, a simple adjustment or push can solve the feeding issue.
- Check the ammunition you are using. If it is old or damaged, this could be causing your feeding issue.
- Clean your rifle’s action thoroughly. Any debris or build-up in the action can hinder proper feeding of rounds.
- Lubricate the action after cleaning. This will help ensure smooth movement and feeding of rounds.
- Inspect the feed ramp for any damage. If you notice any, it may need to be repaired or replaced.
- If none of these solutions work, it is best to take your rifle to a gunsmith for further inspection and potential repairs.
2. Magazine Release Issue
One of the most common issues that users face is difficulty in releasing the magazine. This could be due to several factors such as a tight fit, debris build-up, or a faulty release mechanism.
Another issue is the magazine falling out of the rifle during use, which not only affects your shooting experience but also poses a safety hazard.
Solutions
If you are having trouble releasing the magazine, try applying some lubricant to the release mechanism and see if that helps. If there is debris build-up, clean it out with a cloth or compressed air. If these solutions do not work, it is possible that the release mechanism needs to be replaced.
To prevent the magazine from falling out during use, make sure that you are inserting it correctly and securely.
You can also try adjusting the tension on the magazine catch by using a small screwdriver. If this does not solve the issue, contact Mossberg for further assistance.
3. Heavy Trigger
A common issue that many users have reported with the this firearm is its heavy trigger pull. This can impact accuracy and make it more difficult to shoot consistently. If you’re experiencing this problem, there are a few potential solutions you can try.
- Install an Aftermarket Trigger: One option is to install an aftermarket trigger that has a lighter pull weight. These triggers are designed to reduce the amount of force needed to pull the trigger, making it easier and smoother.
- Adjust Trigger Weight: If you’re comfortable doing so, you can also adjust the weight of your current trigger. This involves using special tools and following specific instructions from Mossberg’s manual. However, this should only be attempted by experienced gun owners.
- Practice Proper Trigger Control: Often, the issue with heavy trigger pull is not the trigger itself, but rather the shooter’s technique. Make sure you are pulling the trigger straight back and using the pad of your finger to do so. Avoid jerking or slapping the trigger as this can lead to a heavier pull.
4. Stiff Bolt
If you’ve been using your Mossberg MVP Scout for some time now, you may have experienced a problem with the bolt becoming stiff and difficult to operate.
This can be a frustrating issue to deal with, especially if it happens in the middle of a shooting session.
The most common cause of this problem is lack of lubrication. The bolt needs to move smoothly and freely in order to operate properly.
If you don’t regularly clean and lubricate your rifle, this could be the reason why you’re experiencing stiffness in the bolt.
To solve this issue, make sure to clean and lubricate your rifle after every 50-100 rounds fired. This will help keep the bolt functioning smoothly.
Also, pay attention to where you apply the lubricant. It’s important to apply it to the bolt itself, as well as any other moving parts and contact points.
5. Sight Alignment
First off, let’s talk about what sight alignment actually is. It’s the concept of lining up your front and rear sights so that they are perfectly aligned with your target. This is crucial for accurate shooting, as even a slight misalignment can throw off your shot.
Now, onto some common problems you may encounter with sight alignment and how to fix them:
- Front Sight Too High or Low: If you find that your front sight is either too high or too low, you can adjust it by loosening the screw on your sight and sliding it up or down as needed. Make sure to tighten the screw back up once you have made the adjustment.
- Front Sight Too Far Left or Right: If your front sight is off center, you can adjust it by using a sight pusher tool or by tapping it gently with a hammer and punch. Make sure to make small adjustments and check your alignment after each one.
- Rear Sight Not Centered: Your rear sight should be centered between the two sides of your front sight. If it is off center, you can adjust it by loosening the screws on both sides and moving it left or right until it is centered.
- Rear Sight Not Aligned with Front Sight: If your rear sight is not aligned with your front sight, you can adjust it by loosening the screws on both sides and sliding it left or right until it lines up with the front sight.
6. Light Primer Strikes
If you’re facing the issue of light primer strikes with your Mossberg MVP Scout, don’t worry – it’s a common problem that many rifle owners have encountered.
This can be caused by a variety of factors, including dirty or damaged firing pin components, weak hammer springs, or improper ammunition.
To address this problem, first make sure to thoroughly clean and inspect your firing pin components. If they are dirty, ensure to clean them with a good quality solvent and replace any damaged parts if necessary.
Additionally, check the hammer spring for signs of wear or damage – this can often be fixed by replacing it with a new one.
Another potential cause for light primer strikes is using incorrect or low-quality ammunition. Make sure to use high-quality, factory-produced ammo that is recommended for your rifle.
Using reloaded or surplus ammunition can often lead to issues such as light primer strikes.
Frequently Asked Questions(FAQs)
What should I do if my Mossberg MVP Scout rifle is having difficulty cycling the bolt action?
If you are encountering cycling issues, make sure that the rifle is properly lubricated and that the bolt and action are clean.
Additionally, you may want to have a gunsmith inspect the rifle to ensure that all components are in good working order.
How can I address concerns about the magazine well of my Mossberg MVP Scout rifle?
If you are experiencing issues with the magazine well, ensure that the magazines you are using are compatible with the rifle model. It’s also important to keep the magazine well clean and free from obstructions.
What are the benefits of using a scope on a Mossberg MVP Scout rifle?
A scope can enhance the accuracy and precision of your shooting, especially at longer distances. It allows for better target acquisition and improved performance in various field conditions.
Can I customize the stock of my Mossberg MVP Scout rifle?
Yes, there are aftermarket stocks available for Mossberg MVP Scout rifles, allowing you to tailor the look and feel of your rifle to your preferences.
Just ensure that any modifications comply with regulations and do not compromise the rifle’s performance.
What is the price range for Mossberg MVP Scout rifles?
The price of Mossberg MVP Scout rifles can vary depending on the model and included features. However, you can expect to find them in the range of $400 to $800, with potential variations based on any additional accessories or enhancements.
How does the Mossberg MVP Scout rifle compare to other scout-style rifles like the Ruger Gunsite Scout?
The Mossberg MVP Scout and the Ruger Gunsite Scout are both excellent options for those seeking a lightweight and handy rifle.
Each has its own unique features and benefits, so it’s essential to compare them based on your specific needs and preferences.
What type of rails are compatible with the Mossberg MVP Scout rifle?
The Mossberg MVP Scout rifle is compatible with Picatinny rails, and you can easily mount accessories such as optics, lights, and other gear to enhance the rifle’s versatility and functionality.
At what distance should I zero my Mossberg MVP Scout rifle?
It is recommended to zero your Mossberg MVP Scout rifle at a distance of 100 yards to achieve optimal accuracy for various shooting scenarios.
Conclusion
Alright, you have reached the end of this guide on Mossberg MVP Scout Problems and their Solutions. We hope that this guide has provided you with plenty of helpful information to address any issues or concerns you may have had with your rifle.
Honestly, it can be frustrating to encounter problems with your firearm, especially if you’re in the middle of a hunting or shooting trip.
But with a little bit of knowledge and some simple troubleshooting, you can quickly dig into the root of the problem and get back to enjoying your Mossberg MVP Scout.
Related Posts: