PSAK-47 GF3 Problems And Their Solutions

Are you a proud owner of a PSAK-47 GF3 rifle? If so, you know this firearm is one of the most reliable and durable AK variants on the market.

But like any other mechanical device, it can experience problems from time to time. And when it comes to the GF3, some issues seem to be more common than others.

In this blog post, we’ll dive deeply into the most common PSAK-47 GF3 problems and provide practical solutions to overcome them.

Problems	Solution
Failure To Feed	Adjust gas block or buffer weight, use high-quality magazines
Pmag Getting Stuck	Check for mag catch wear or replace mag catch
Bolt Carrier Sticking	Clean and lubricate the rifle properly, replace worn parts
Trigger Not Resetting	Inspect trigger components for wear, replace worn parts
Recoil Spring Problems	Check for damage or wear, replace the recoil spring
Jamming Problems	Use high-quality ammunition and magazines, check for worn parts
Accuracy Issues	Check barrel crown, gas system, and sights, and use quality ammo

PSAK-47 GF3 Problems And Their Solutions

1. Failure To Feed

Are you tired of experiencing a frustrating stoppage during firing because your rifle fails to feed? Are you sick of having to clear your weapon and start over?

Yeah, I thought so. Well, pay attention and I’ll tell you the reasons why this happens and how to fix it.

The first reason for Failure To Feed in a PSAK-47 GF3 is due to issues with the magazine. Check to make sure that the magazine is seated correctly and that it is not worn or damaged.

Inspect the feed lips to ensure that they are not bent or cracked. If there are issues with the magazine, then it needs to be replaced.

The second reason for Failure To Feed is due to a dirty weapon. If your rifle is dirty, then it will lead to jamming and stoppages during firing.

Make sure to clean your weapon thoroughly and remove any debris or dirt that may be causing the issue.

Lastly, the reason for Failure To Feed in a PSAK-47 GF3 can be due to a faulty or worn extractor. If this is the case, then the extractor needs to be replaced by a qualified gunsmith.

So there you have it, the reasons why a PSAK-47 GF3 can experience Failure To Feed and how to fix it step by step.

Don’t make excuses for your rifle, take the time to inspect and clean it regularly to avoid any failures during firing.

And if you do experience issues, address them immediately to ensure the safety and reliability of your weapon.

Now get out there and shoot with confidence, you’re armed with the knowledge to handle any problem that may arise.

2. Pmag Getting Stuck

It’s a common issue in this firearm that can be incredibly frustrating. The good news is that there are solutions to this problem, and I’m going to walk you through them step by step.

One reason why your Pmag might be getting stuck is due to an improper fit. If the mag well is too tight, it can create friction that prevents the mag from dropping freely.

To fix this issue, you’ll need to file down the mag well until it’s just the right size. It might take a bit of trial and error, but with some patience, it’ll fit like a glove.

Another potential issue could be with the magazine itself. Sometimes, the feed lips can become bent and cause jams.

This is especially true if you’ve dropped the mag or subjected it to heavy use.

To fix this issue, you’ll need to disassemble the mag and bend the feed lips back into shape. It’s a delicate process, but it’s worth it to ensure smooth operation.

Lastly, if you’re experiencing jams with a new mag, it might just need to be broken in. Give it a little bit of use, and it should start to work properly over time.

Additionally, make sure that the mag is cleaned and free of debris that might cause issues while using it.

3. Bolt Carrier Sticking

Got a PSAK-47 GF3 with a bolt carrier that’s sticking? Well, before you start throwing a fit, let me ask you a few questions. Have you been properly maintaining your firearm?

Have you been using quality ammunition? Because let me tell you, these are just a couple of reasons why your bolt carrier may be sticking.

Now let’s get down to the fixin’. First off, you’ll want to clean and lubricate your firearm thoroughly.

This means taking apart your PSAK-47 GF3 and giving every inch a nice wipe down with a cleaning solvent and then applying a good quality lubricant.

Take special care to clean the bolt carrier and gas key as these are parts that are highly susceptible to sticking.

Next up, check your ammo. Be sure you’re using a quality brand and type of ammunition that is suited for your firearm.

Using low-quality or the wrong type of ammo can cause your bolt carrier to stick, leading to a multitude of issues.

Lastly, if the above steps didn’t alleviate the problem, it may be time to replace your bolt carrier.

This can be a fairly involved process, so it’s recommended to seek out a qualified gunsmith to ensure proper installation.

4. Trigger Not Resetting 

Firstly, the trigger not resetting issue can be caused by a dirty or worn trigger group. The trigger components may become clogged with dirt, debris, or corrosion, hindering their function.

Additionally, the springs within the trigger group may become worn out or damaged, leading to inaccurate resets.

To fix this issue, step one is to disassemble the trigger group and thoroughly clean all components, paying extra attention to the springs.

If any components, particularly the springs, are damaged, they must be replaced with new ones. This can be done by purchasing a complete trigger kit or individual parts.

Secondly, the hammer spring may be too weak to provide enough force for a strong reset.

This can occur due to the weakening of the spring over time or the use of an incorrectly sized or installed spring.

To address this issue, step two is to replace the hammer spring with a new, appropriately sized one.

It is important to ensure that the spring is installed correctly and has sufficient tension to provide a strong reset.

Lastly, the trigger bar may be improperly installed or damaged, causing it to become misaligned and preventing proper resetting.

To resolve this issue, step three is to ensure that the trigger bar is installed correctly and functioning properly. If it is damaged, it should be replaced with a new one.

5. Recoil Spring Problems

The reasons behind those pesky problems are numerous but don’t worry, I’ll guide you through how to fix them step by step.

First off, one common cause of recoil spring issues is improper maintenance. Have you been neglecting your firearm?

Shame on you! Make sure to clean your weapon regularly, and inspect the spring for any deformities or damage. If you notice any issues, it’s time to replace the spring.

Another cause of recoil spring problems is worn-out or weakened springs. Over time, springs can lose their tension and elasticity.

This can cause malfunctions, and even be dangerous. If you suspect this is the issue, don’t hesitate to invest in a new spring for your weapon.

Finally, faulty ammunition or a damaged chamber can cause recoil spring problems.

Make sure to use high-quality ammunition and inspect your chamber for any damage or wear and tear.

Now for the moment, you’ve all been waiting for, how to fix recoil spring problems step by step. The first step is to remove the magazine and ensure the firearm is unloaded.

Next, field-strip the weapon and remove the recoil spring assembly. Inspect the spring for any deformities or damage. If you notice any issues, replace the spring with a new one.

If worn-out springs are the problem, replace them with new springs. Make sure to use high-quality springs from reputable manufacturers.

Avoid using cheap, subpar springs from questionable sources.

If faulty ammunition or a damaged chamber is the issue, discontinue use of the weapon until repairs can be made. Make sure to inspect the chamber for any damage or wear and tear.

6. Jamming Problems

This is a common issue among gun owners that can be caused by several reasons, including poor maintenance, low-quality ammunition, and faulty equipment.

One of the main reasons for jamming is the lack of proper cleaning and oiling of the gun.

Over time, dirt, dust, and residue can accumulate in the barrel and trigger mechanism, causing malfunctions.

Therefore, it is crucial to clean your rifle regularly and lubricate it with a high-quality oil.

Another common cause of jamming is the use of low-quality ammunition. Cheap, substandard bullets can cause feeding issues, misfires, and failures to eject.

Therefore, always use high-grade, reliable ammo that is recommended for your gun.

Faulty equipment is also a contributing factor to jamming. Check your magazine to ensure it is in good condition and free of any rust, dirt, or debris.

If you suspect a faulty magazine, replace it with a new one.

To fix a jam, clear the gun and remove the magazine. Check the barrel for any obstructions, and use a cleaning rod to push out any debris.

Inspect the ammo for any anomalies, such as bulges or cracks, and discard any defective rounds.

Reassemble the gun and test-fire it. If it still jams, repeat the process and consider seeking professional assistance.

7. Accuracy issues

Well, well, well, what do we have here? Accuracy issues with the PSAK-47 GF3? Don’t tell me that’s a surprise.

Let me guess, you’re probably struggling to hit a target that’s only a few hundred yards away, right?

Frustrating, isn’t it? Well, fear not my fellow gun enthusiast, let me shed some light on this issue and provide you with step-by-step instructions on how to fix it.

First things first, let’s identify the reasons behind these accuracy issues. Is it the ammunition? Is it the scope?

Or maybe, just maybe, it’s the shooter’s lack of skill and experience? Don’t get defensive now, hear me out.

Before blaming the tool, we need to make sure we’re using it properly.

Assuming the ammunition and scope are of good quality, let’s move on to addressing some common issues that may be affecting your accuracy.

One possibility is a loose barrel. If the barrel isn’t tightened all the way, it can cause the bullet to veer off course. So, step one in fixing accuracy issues is to make sure the barrel is tightened correctly.

Next up is the gas block alignment. A misaligned gas block can cause the bullet to be pushed off course or even cause the rifle to malfunction.

To fix this issue, you’ll need to remove the gas block and reinstall it, ensuring it’s aligned correctly.

Another thing to investigate is the crown of the barrel. A damaged crown can have a negative impact on accuracy, so it’s important to give it a once over and make sure it’s in good condition.

Last but not least, let’s talk about trigger control. As mentioned earlier, we can’t rule out the shooter as a potential source of inaccuracy.

A sloppy trigger pull can throw the entire shot off course, so make sure you’re using proper trigger control techniques.

So, there you have it. By identifying and addressing these common issues, you should see a significant improvement in your accuracy with the PSAK-47 GF3.

Don’t give up just yet, my grumpy friend.

With a little bit of patience and some attention to detail, you’ll be hitting bullseyes in no time.

Is the PSAK-47 GF3 Any Good?

The PSAK-47 GF3 is a popular AK-style rifle manufactured by Palmetto State Armory.

It has generally received positive reviews from firearm enthusiasts and reviewers for its reliability, accuracy, and overall quality.

Many owners have reported that it is a well-built firearm that performs consistently and is an excellent value for its price point.

However, as with any firearm, individual experiences may vary and it’s important to do your own research and consult with experts before making a purchase decision.

Frequently Asked Questions

How accurate is the PSAK-47?

The PSAK-47 is generally considered to be a reasonably accurate rifle, but its accuracy can vary depending on several factors such as ammunition quality, shooter skill, and barrel length.

Overall, it’s considered to be accurate enough for most applications such as range shooting, hunting, and self-defense.

Is the PSAK-47 GF3 reliable? 

Yes, the PSAK-47 GF3 is known for its reliability and is often praised by owners for its consistent performance

Who makes PSAK-47 GF3?

Palmetto State Armory

How much does a PSAK 47 gf3 weigh?

Around 6.7 pounds

Can I use different AK-style magazines with the PSAK-47 GF3? 

Yes, the PSAK-47 GF3 is designed to work with standard AK-style magazines, so you can use a variety of different magazines with this rifle.

Does the PSAK-47 GF3 come with a warranty?

Yes, Palmetto State Armory offers a limited lifetime warranty for the PSAK-47 GF3, which covers defects in materials and workmanship.

Conclusion

Well, well, well. After all the hullabaloo surrounding the PSAK-47 GF3, it seems that there are still people out there who are struggling with this infamous rifle.

If you’re one of them, fear not! The answer to your problems may be closer than you think.

First off, let’s address some of the most common issues that people face with the PSAK-47 GF3. For starters, many complain that the trigger is too heavy, which can negatively impact the accuracy and overall enjoyment of the gun.

Others have reported issues with the magazine release, which can be difficult to manipulate and may require extra force to activate.

But what about solutions? Well, it seems that there are a few things you can do to make your PSAK-47 GF3 experience a little smoother.

For one, you may want to consider investing in a lighter trigger, which can make a world of difference when it comes to accuracy and ease of use.

Additionally, there are a number of aftermarket magazine releases available that can help alleviate some of the issues that people have been having with this particular aspect of the rifle.

Now, with all of that said, I want to leave you with a thought-provoking question.

At what point do we stop putting up with subpar products and demand more from the companies that produce them?

It’s easy to get frustrated with guns like the PSAK-47 GF3, but maybe it’s time we start holding manufacturers accountable for the quality of their products.

After all, we deserve better than guns that don’t work as advertised. Keep that in mind the next time you’re struggling with a faulty firearm.