Remington 572 Problems And Their Solutions

The Remington 572 rifle is a highly popular firearm among hunters and shooters due to its accuracy, reliability, and sleek design.

This pump-action rifle has been in production since 1955, making it one of the longest-running firearms on the market. Its popularity can be attributed to its lightweight design, easy operation, and ability to fire various ammunition types.

However, like any firearm, the Remington 572 is not immune to problems affecting its performance and accuracy.These issues can arise due to various factors, such as user error, poor maintenance, and wear and tear resulting from frequent use.

As such, owners of this rifle need to be knowledgeable about the common problems that can occur and how to solve them to ensure optimal performance.

This article will provide an overview of the most common issues that Remington 572 owners may encounter and provide practical solutions to rectify them.

Some of the most common issues with this gun are Feeding Problems, Failure To Eject, failure to return to battery, Hammar, Jamming, Open Sight, Trigger Pull, and Recoil Spring Problems.

Continue reading to know the solution to the above problems.

Common Remington 572 Problems And Their Solutions

1. Feeding Problems

Are you experiencing feeding problems with your Remington 572 rifle? This is a common issue that many firearm owners face, but it can be frustrating during a hunting trip or at the range.

The good news is that there are several causes of feeding problems, and most can be easily fixed by following a few simple steps.

One of the main causes of feeding problems is a dirty or fouled chamber. If you have been firing your rifle for a while without cleaning it, the buildup of grime and debris can cause your rounds to misfeed.

To fix this issue, remove the magazine and ensure the chamber is clear of any obstructions.

Next, use a cleaning rod and brush to clean the chamber thoroughly, and then wipe it down with a clean cloth.

Another common cause of feeding problems is magazine issues. This could be due to a weak magazine spring, which can cause your rounds not to feed properly.

To fix this issue, replace the magazine spring with a stronger one that can reliably push the rounds up into the chamber.

A damaged or worn feed ramp can also cause feeding problems. In this case, it may be necessary to replace the feed ramp altogether. A gunsmith or experienced firearm owner can typically do this with the right tools.

Lastly, ammunition issues can cause feeding problems. Low-quality or defective ammunition can lead to misfires and feed failures.

Check your ammunition for signs of damage or defects, and consider switching to a higher-quality brand if necessary.

Overall, there are several causes of feeding problems with a Remington 572 rifle, but they can all be easily fixed with the right tools and knowledge.

2. Failure To Eject

Another common issue that people reported with this gun is Failure to eject.

This common problem can frustrate shooters, but several causes and fixes exist. Let’s take a closer look at what causes failure to eject firearms and how you can take steps to rectify the problem.

First and foremost, dirty or fouled chambers are a primary culprit for failure to eject.

After firing many rounds, residue from expended rounds can build up in the chamber, causing a failure to eject.

Regularly cleaning your firearm can help prevent this issue.

Extractor issues are another cause for failure to eject.

The extractor is responsible for holding onto the spent cartridge and releasing it at the right moment.

If the extractor is damaged or dirty, it may not be able to hold onto the spent cartridge properly, causing a failure to eject.

A defective or worn ejector can also lead to a failure to eject.

The ejector is the component that physically throws the spent cartridge out of the firearm.

If the ejector is damaged or worn, it may be unable to do its job properly.

Improper ammunition is another common cause for failure to eject. Using the wrong caliber or type of ammunition can lead to a failure to eject or even damage the firearm.

Finally, a weak or worn recoil spring can cause a failure to eject.

The recoil spring helps push the slide back into position after firing, which in turn helps eject the spent cartridge.

A weak or worn recoil spring may not have enough force to eject the spent cartridge properly.

To fix these issues, start by thoroughly cleaning your firearm. Make sure to pay special attention to the chamber and extractor.

If these components are still malfunctioning, take your firearm to a qualified gunsmith for repair or replacement.

Additionally, always be sure to use the proper type and caliber of ammunition for your firearm and replace worn or weak recoil springs as needed.

3. Hammer Problem

The hammer is essential to any firearm as it initiates the firing mechanism.

It can be frustrating and also dangerous when the hammer malfunctions, causing a misfire or even worse, an accidental discharge.

There are various reasons why the hammer may not work correctly, including a misaligned or damaged hammer, damaged firing pin, dirty or obstructed firing pin channel, broken hammer spring, defective ammunition, or improper assembly.

If you do notice any of these issues with your Remington 572, there are some steps you can take to fix them:

1. Misaligned or damaged hammer: If you notice that the hammer is not aligned correctly or is damaged, you will need to disassemble the firearm and remove the hammer. Once removed, inspect it to identify any damage and realign it if necessary. If the damage is severe, you may need to replace the hammer entirely.

2. Damaged firing pin: If it is damaged, you must remove and inspect it for any signs of wear and tear. If the pin is not too severely damaged, you can file it down to remove any burrs. If it is damaged beyond repair, you will need to replace it.

3. Dirty or obstructed firing pin channel: If it is dirty or obstructed, you will need to disassemble the firing mechanism and clean it thoroughly. Use a cleaning solution and a brush to remove any dirt or debris that may be blocking the channel.

4. Broken hammer spring: If your hammer spring is broken, you will need to replace it with a new one. To do this, disassemble the firearm and remove the broken spring. Replace it with a new one, ensuring it is correctly installed before reassembling the firearm.

5. Defective ammunition: If you are experiencing issues with the hammer, it may be due to defective ammunition. Ensure you are using high-quality ammunition that is suitable for the Remington 572.

6. Improper assembly: Lastly, if you have recently disassembled and reassembled your firearm and are experiencing issues with the hammer, it could be that it was not reassembled correctly. Disassemble the firearm again, double-checking that all parts are in the correct place before reassembling it.

4. Jamming Problems

Jamming can occur for various reasons and can be a major inconvenience for any shooter. So, what are the main causes of jamming problems, and how can you address them?

One common culprit for jams is poor ammunition quality. If you’re using low-quality or defective rounds, they may not feed or eject properly.

Additionally, magazine issues can also lead to jams. If your magazine is bent, worn, or damaged, it may not be able to hold or feed ammunition properly.

Another possible cause of jamming is a dirty or fouled gun.

Too much dirt, dust, or debris inside your Remington 572 can clog up the mechanism and cause malfunctions.

In addition, a weak or worn extractor can also result in jams.

If the extractor isn’t strong enough to properly grip the spent casing, it may be unable to remove it from the chamber.

Similarly, a faulty or worn extractor spring can also contribute to jams. This small, but crucial component helps ensure that the extractor functions properly.

If it’s damaged or worn, it may not provide enough tension to extract the spent casing properly.

Finally, a rough or damaged chamber can also lead to jamming problems.

If the chamber is damaged or has burrs or rough spots, it may not provide a smooth surface for the cartridge to feed into or eject out of.

So, how can you fix these issues and prevent jams in the future? Here are some step-by-step solutions:

1. Use high-quality ammunition. Don’t skimp on cheap or defective rounds, as they may cause more problems than they’re worth.

2. Inspect your magazine regularly. Look for signs of wear or damage, and replace it if necessary.

3. Keep your Remington 572 clean. Regularly clean and lubricate the interior of your firearm to prevent dirt and debris buildup.

4. Replace a weak or worn extractor. If the extractor isn’t working properly, it’s best to replace it.

5. Replace a faulty or worn extractor spring. This small component is crucial for proper functioning, so make sure it’s in good condition.

6. Have your chamber inspected and repaired if necessary. If you suspect your chamber is damaged, take your firearm to a qualified gunsmith to inspect and repair it.

Follow the above steps, and I hope you’ll fix the issue without the need of a gunsmith.

5. Trigger Pull Problems

This is a common issue encountered by many firearm enthusiasts. Trigger pull is the force needed to pull a trigger and discharge a firearm.

You can fix this issue yourself, but you need some knowledge of what you are doing.

One of the main causes of trigger pull problems is trigger spring issues.

Over time, firearm springs can become weak or broken, leading to the inconsistent trigger pull. Dirt and debris can also accumulate in the trigger assembly, causing it to malfunction.

Improper trigger adjustment can also lead to problems with trigger pull. Misaligned trigger components are another common culprit.

Fortunately, there are steps you can take to fix these issues.

To address trigger spring issues, it may be necessary to replace the spring entirely. Regular cleaning and maintenance can help prevent dirt and debris buildup.

If you suspect an improper trigger adjustment, refer to the firearm’s manual for guidance on proper adjustment.

Misaligned trigger components will likely require disassembly of the firearm in order to reposition the parts correctly.

It’s important to note that attempting to fix trigger pull problems without proper knowledge and experience with firearm mechanics can be dangerous.

If you’re unsure of how to address an issue with your firearm, it’s best to consult a professional gunsmith.

6. Gun Fails to Lock Problem

A worn or damaged locking mechanism is one of the main causes for a Remington 572 gun failing to lock. This can happen due to prolonged usage or mishandling of the gun.

Another reason behind the malfunction could be a dirty or fouled action, which can prevent the locking mechanism from functioning properly.

Also, a worn-out recoil spring can cause the gun to fail to lock, as it fails to generate enough force to push the locking mechanism into place.

Similarly, a damaged or worn extractor or ejector can also prevent proper functioning of the locking mechanism. Lastly, improper ammunition or magazine issues can also lead to the gun failing to lock.

So, if you are facing this issue, there are a few simple steps that you can follow to fix it. Firstly, remove the magazine and make sure the chamber is empty.

Next, inspect the locking mechanism and clean it thoroughly.

If you notice any damage, replace the part with a new one. Similarly, check the action, clean it, and lubricate it with gun oil.

In case of a worn-out recoil spring or damaged extractor or ejector, replace the part with a new one. Also, use proper ammunition and magazine, as the manufacturer recommends.

7. Open Sight Problem

Another very common problem with this gun is the Open sight problem.

Open-sight problems can arise from several factors, ranging from misalignment to shooter error. Let’s take a closer look at what open-sight problems are and what causes them.

Open sight refers to a rifle’s front and rear sights that are not covered or enclosed. Rather, they are open and exposed to the shooter.

Open sights are the most basic type of sights, and they allow for quick target acquisition. However, these types of sights can become problematic if they are not aligned properly.

One of the main causes of open sight problems is misalignment. This can occur if the front and rear sights are not in a straight line with each other.

As a result, the shooter’s aim will be off, and accuracy will suffer.

Another common cause of open sight problems is loose or damaged sights. If the sights on your rifle are not secure, they can shift or move during use, throwing off your aim.

Likewise, if the front or rear sight is damaged or bent, it may need to be replaced to ensure proper alignment.

Sight height can also cause open sight problems. This refers to the relative height of the front and rear sights.

If the front sight is too high or too low, it can affect accuracy and cause your shots to miss the mark.

Sight picture is another factor that can affect open sight accuracy. This term refers to the relationship between the shooter, the rifle, and the target.

If the shooter’s eye is not in the correct position or the rifle is not held properly, it can impact sight picture and cause open sight problems.

Finally, shooter error can also be to blame for open sight problems. This can include poor technique, lack of practice, or failure to adjust for distance or wind properly.

If you are experiencing an open sight problem, there are several steps you can take to address it. First, ensure that your sights are properly aligned and that they are securely tightened in place.

Consider replacing your sights if you suspect they may be damaged or bent.

Likewise, ensure that your sight height is correct for your rifle and that you are holding the rifle properly to maintain a proper sight picture.

Finally, practice good shooting technique and adjust for distance and wind to minimize shooter error.

8. Bolt Freeze-Up Issue

Have you ever encountered bolt freeze up issues during your shooting trips?

The Remington 572 is a popular and reliable rifle model, but even the best of the best sometimes experience technical difficulties.

One of the most common issues with Remington 572 is bolt freeze-up. But what exactly is bolt freeze up, and what are its main causes?

Bolt freeze up occurs when the bolt of the rifle becomes stuck, making it difficult or impossible to chamber a new round.

The most common causes for this issue are lack of lubrication, dirty or corroded parts, poor maintenance, and environmental factors such as extreme weather conditions.

To fix bolt freeze up issues, you need to follow these steps:

Step 1: Disassemble the rifle and inspect all parts for dirt, corrosion, and wear. Pay particular attention to the bolt, bolt carrier, and receiver.

Step 2: Clean all parts thoroughly using a suitable cleaning solvent and lubricant. Use a brush and cloth to remove any dirt or corrosion, then apply a thin lubricant layer to all moving parts.

Step 3: Check the bolt for proper fit and alignment. You may need to replace the bolt if it is misaligned or damaged.

Step 4: Once everything is clean and lubricated, reassemble the rifle and test-fire it to ensure the bolt operates smoothly.

By following these steps, you can fix most bolt freeze issues.

9. Recoil Spring Problem

This is a common concern for many gun owners. The recoil spring is an essential component that absorbs the shock of the firearm, allowing it to function correctly.

There are several causes for recoil spring problems, including wear and tear, lack of lubrication, incorrect installation, and the accumulation of dirt and debris.

Over time, the spring can become damaged or worn from regular use, leading to malfunctions during firing.

Additionally, a lack of lubrication can cause the spring to seize up and fail to function correctly.

Thankfully, fixing these issues is relatively simple and can be done in just a few steps. First, inspect the spring for any signs of damage or wear.

If the spring appears to be in good condition, lubricate it with a firearm-specific lubricant. Be sure to follow the manufacturer’s instructions carefully.

If the spring is damaged, it will need to be replaced. To do so, start by removing the stock from your Remington 572.

Once the stock is removed, you should have access to the recoil spring assembly.

Carefully remove the old spring and replace it with a new one. Reassemble the firearm and test it to ensure proper functionality.

What Do The User Think About Remington 572

Regarding the Remington 572, users have quite a mixed response. Despite the variety of opinions, several clear takeaways can be observed from reviewing user feedback.

Some users hold this rifle in high regard, commenting on the quality of the build and its reliability. Others find it to be less than impressive, citing problems with accuracy and manufacturing defects.

One noteworthy feature that several users mentioned was the rifle’s smooth operation and low recoil, making it easy and comfortable to use.

It was also praised for its versatility, with different users using it for hunting, plinking, and pest control.

On the downside, others observed that the Remington 572 could be finicky and require some finesse to operate properly.

Additionally, some noted the rifle’s tendency to jam and require frequent maintenance to keep it functioning smoothly.

Despite the varied opinions, it’s clear that the 572 holds a distinct place in the firearms community.

As with any product, it comes with its pros and cons, and users will need to weigh these factors against their personal preferences and intended use to determine if the rifle is right for them.

3 Best Alternatives To Remington 572

The Remington 572 is known for its reliable performance, versatility, and accuracy.

However, if you’re in the market for a more modern and innovative rifle, or simply looking for something that better suits your specific needs, there are several alternatives that you should consider.

Here are the three best alternatives to the Remington 572, each with its unique set of features and benefits:

1. Marlin Model 60:

This .22LR semi-automatic rifle boasts an impressive record of reliability and quick-action cycling.

Its low recoil makes it an excellent choice for target shooting and small-game hunting. It has a magazine capacity of 14 rounds, plus one in the chamber, and a sleek, lightweight design that’s easy to handle and transport.

Marlin Model 60 offers a range of aftermarket accessories, allowing you to customize your rifle to fit your needs.

2. Ruger 10/22:

This rifle has gained a reputation as one of the most reliable and versatile .22LR rifles on the market.

Ruger 10/22 is a semi-automatic rifle with a detachable rotary magazine capacity of between 10 and 25 rounds, depending on the model.

It features a barrel band and a scope base, making it easy to attach various accessories.

The Ruger 10/22 design is also highly customizable, with many parts and accessories available on the market.

3. Winchester Model 70:

This is an outstanding bolt-action rifle built with precision craftsmanship and attention to detail. The rifle is available in calibers ranging from .223 Remington to .458 Winchester Magnum, making it an excellent choice for medium to large game hunting. The Winchester Model 70 features a two-position safety, a controlled round feeding system, and a crisp, adjustable trigger. In addition, its free-floating barrel optimizes accuracy and minimizes distortion due to internal stress.

Frequently Asked Questions

What is the caliber of the Remington 572?

The chambered-in .22 Long Rifle (LR).

What is the magazine capacity of Remington 572?

Remington 572 has a tube magazine with a capacity of 15 rounds.

Is the Remington 572 suitable for hunting?

It is a popular choice for small game hunting and plinking.

Does the Remington 572 have a detachable magazine?

No, it has a tubular magazine located under the barrel.

What is the barrel length of Remington 572?

It has a barrel length of 21 inches.

Is the Remington 572 a pump-action rifle?

Yes, it is a pump-action rifle.

What is the overall length of Remington 572?

It has an overall length of approximately 40 inches.

Conclusion

While the Remington 572 is an excellent rifle, it has problems. However, proper care and maintenance can prevent most of these issues.

By following the mentioned solutions, you can enjoy a flawless shooting experience and comfort knowing you’re using a reliable firearm.

As gun enthusiasts, you should take the necessary measures to ensure your firearms perform at their best.

I hope this article helps to solve the problems that are frustrated with and trying to solve the issue from long time.