Common Remington 710 Problems and Solutions

The Remington 710 is a popular bolt-action rifle used by hunters and sportsmen for many years. However, like any firearm, it is not without its common problems.

Remington 710 Problems

This article will discuss some of the most common Remington 710 problems and provide solutions. Read on to learn about the Remington 710 and how to keep it in good working order.

The most common problems that Remington 710 users experience are Failure To Feed, Failure To Eject, Bolt Stop Problems, Trigger Problems, Action Problems, and Poor Accuracy.

Common Remington 710 Problems and Solutions

1. Failure To Feed

The primary reason for the failure to feed in the Remington 710 is the notorious magazine design flaw. This model features a blind magazine, which is a non-detachable and non-removable magazine integrated into the rifle’s stock.

Due to inefficient design and poor quality control, the magazine tends to malfunction, resulting in feeding issues.

Here’s how to fix the issue step by step:

Step 1: Unload your rifle

Ensure your Remington 710 is completely unloaded. Remove any ammunition from the chamber, and verify that the firearm is safe to work on.

Step 2: Disassemble the rifle

Carefully disassemble your Remington 710 by removing the stock, barrel, and action. Make sure to consult your firearm’s manual or seek professional assistance if you’re uncertain about the disassembly process.

Step 3: Inspect the magazine and follower

Examine the blind magazine for any signs of damage, wear, or debris that might be affecting its function. Assess the follower’s condition – a poor quality or malfunctioning follower can lead to feeding issues.

Step 4: Clean the magazine

Thoroughly clean the magazine using a brush and a suitable firearm-cleaning solution. Remove any debris or dirt that may be hindering the smooth movement of the follower.

Step 5: Improve the follower’s performance

To ensure a smoother feeding process, you can either replace the original follower with a high-quality aftermarket one or sand down the contact surfaces of the existing follower. By doing so, you will minimize friction and enhance feeding reliability.

Step 6: Reassemble the rifle

Reassemble your Remington 710 by reversing the disassembly steps. Ensure all components are properly seated and tightened.

Step 7: Test-fire the rifle

Safely test-fire your rifle using live ammunition to verify that the feeding issue has been resolved. If the problem persists, consult a qualified gunsmith for further troubleshooting or possible modifications.

2. Failure To Eject

A dirty or worn-out extractor is the most common cause of FTE in the Remington 710.

When ejecting, this part pushes the spent shell casing up from the chamber and out from the gun. If the extractor becomes too clogged with debris or wears out due to frequent use, it cannot perform its job properly.

Another possible cause of FTE could be an improperly adjusted bolt lock. If this part is too tight, it can interfere with extraction by preventing the extractor from pushing the shell casing up and out as it should.

To identify and address these issues, you must begin by stripping down your rifle entirely to make all its components accessible.

This includes removing the magazine box assembly, trigger guard assembly, forend nut, muzzle brake pin, gas system piston/block pin, bolt handle latch pin, trigger plate pins, and magazine tube extension ring spring clip.

Once everything has been taken apart, you should look at each component for signs of damage or wear, such as rust or burring on any edges or contact points.

If you find any damage or wear on any parts, they will likely need to be replaced to help prevent further FTE issues in your Remington 710.

However, if everything looks fine, you should thoroughly clean all parts before reassembling them back into their correct position and verifying that everything is properly adjusted before firing again.

Ensure that all pins are correctly installed and that your safety selector switch isn’t set too tightly, which may interfere with the proper operation of other components in your gun during firing.

3. Bolt Stop Problems

The primary cause of bolt stop issues on the Remington 710 is likely due to wear and tear over time. The parts involved in the firing mechanism of the rifle eventually become worn out, which fails the bolt to stop.

This can prevent you from safely firing your weapon and make loading or unloading rounds from the magazine difficult.

Fortunately, there is an easy fix for this issue that only requires basic tools and supplies.

To begin, disassemble your Remington 710 by removing all parts relevant to the firing mechanism and organizing them on a clean surface. Inspect all of these pieces for any signs of wear or damage; if any part appears damaged beyond repair, replace it with a new one from a reputable gunsmith or firearms dealer.

Once you have inspected all components for damage, use gun oil on each piece and rub it in thoroughly with your fingers or a soft cloth.

This will help lubricate each component and ensure everything operates smoothly when reassembled.

After completing this step, begin reassembling each part of the firing mechanism per manufacturer instructions until all components are back in their proper place.

Finally, test out your newly assembled gun to ensure everything functions correctly; if not, repeat the above steps until you have solved the problem completely.

With these simple steps, you should be able to quickly solve any bolt stop problems on your Remington 710 rifle and get back to shooting without further delay!

4. Trigger Problems

One possible explanation for a trigger malfunction with a Remington 710 is that a mechanical issue may prevent it from firing correctly.

This could include a broken or bent spring, misaligned pins, or excess dirt or debris blocking important parts of the mechanism. It could also be caused by foreign objects such as dirt, dust, or even small pieces of metal getting lodged in the mechanism.

Another potential cause of a trigger malfunction with the Remington 710 is improper lubrication within its internal components.

Remington 710 Problems

If certain parts become too dry or too oily due to inadequate lubrication, they can become jammed and prevent the trigger from functioning properly.

If you are experiencing problems with your Remington 710’s trigger, here are some steps you can take to troubleshoot and attempt to fix it:

  1. Inspect all of the key components within your shotgun’s action (ejector, extractor, hammer). Look for any signs of wear and tear that could indicate something has gone wrong in those areas.
  2. Unscrew any screws or pins that attach components and ensure they do not come loose due to age or excessive use.
  3. Inspect all springs within your shotgun’s action for any signs of damage, such as denting or bending, which could impair their ability to function correctly.
  4. Check all moving parts for any signs of oxidation deposits that can impair their ability to move freely in their respective slots/holes.
  5. Clean out any dirt and grime that may have accumulated over time using an appropriate gun cleaning solution and items such as cotton patches and brushes, depending on how much dirt has built up in those areas.
  6. Once everything has been thoroughly cleaned out, apply a light coat of firearm lubricant on all moving parts before reassembling them back together according to manufacturer guidelines..

5. Action Problems

The most common cause of action problems with the Remington 710 is a misalignment between the bolt and receiver.

This misalignment can be caused by dirt or debris accumulated in action, preventing it from moving properly.

Additionally, improper cleaning of the gun or mishandling can lead to parts becoming loose and causing misalignment.

To fix this problem, it is recommended that you first remove all dirt and debris from inside your gun by using a good-quality cleaning kit.

Once any blockage has been cleared, check all screws and fasteners on the action to ensure they are tightly secured.

If everything seems in order, but still has no luck, you should consider taking your rifle to a professional gunsmith for further inspection and repair.

Another common cause of action problems with Remington 710s is an overly tight extractor claw spring tension.

This tension prevents the extractor claws from engaging properly when cycling rounds through the gun’s chamber, leading to jamming or failure to feed problems.

To resolve this issue, you must adjust the extractor claw tension by either replacing or modifying its spring components or by adjusting its radius so it fits more snugly into the receiver’s recesses.

Again, if these adjustments do not adequately solve your problem, it would be best to seek professional help from a qualified gunsmith.

Finally, one last cause of action issues could be an improperly fitted firing pin assembly or breech face binding due to heavy carbon deposits built up over time around these areas.

To remedy this condition, clean out any carbon buildup from these areas before inspecting for proper fitment of all parts involved in firing your weapon, such as pins, springs, and other related components like extracted linkages and triggers parts, etc.

If all else fails, then again, take it to a certified gunsmith for further analysis, as only he/she can accurately diagnose such intricate errors within complex weapons like yours!

6. Poor Accuracy

The Remington 710 is notorious for accuracy issues due to several factors, including poor quality control, cost-saving measures, and inherent design flaws. Some of these factors include a poor quality stock, difficulty in properly bedding the action, and a low-quality barrel.

The rifle’s bolt system also contributes to reduced accuracy since it has design flaws that cause loose headspace and increased group sizes when fired. Additionally, the factory-made trigger system tends to be heavy and contains excessive creep, further contributing to poor shooting performance.

To fix the accuracy issues of your Remington 710, follow these steps:

1. Replace the factory stock:

The original stock has been reported to be of poor quality and not rigid enough, leading to flexing and torque during shooting.

Upgrading to a high-quality aftermarket stock, such as those made by Bell & Carlson or Hogue, can help to provide a more stable platform for consistent and accurate shooting.

2. Improve the bedding:

Inadequate bedding can cause inconsistencies in harmonics, leading to decreased accuracy.

To improve accuracy, you can either glass bed the action using a high-quality epoxy or opt for a pillar bedding system. Both methods will provide a solid, stable, and consistent platform for the action, reducing inconsistencies in barrel harmonics and improving accuracy.

3. Rework the trigger:

A clean, crisp trigger can significantly improve your shooting experience. Invest in upgrading your existing trigger by installing an aftermarket trigger system, such as the Timney or Rifle Basix triggers.

This will help reduce the weight and eliminate excessive creep, resulting in better shot placement.

4. Address the bolt system:

The Remington 710’s bolt design tends to cause excessive headspace over time, reducing accuracy.

To address this issue, ensure the barrel is properly torqued and the headspace is checked and adjusted by a competent gunsmith.

5. Upgrade the barrel:

A high-quality barrel can significantly affect your rifle’s accuracy.

Consider replacing the factory barrel with a premium aftermarket option from notable companies like Shilen, Hart, or Krieger.

These barrels typically have tighter tolerances and better quality control, leading to improved accuracy.

6. Optimize your ammunition:

Choose the appropriate ammunition for your firearm. Experiment with different bullet weights, brands, and loadings to find the best combination that delivers consistent and accurate performance. Handloading your ammunition can also provide a tailored solution optimized for your rifle.

7. Regularly clean and maintain your rifle:

Proper maintenance and cleaning are essential for optimal firearm performance. Clean the bore regularly using a high-quality bore solvent and ensure that the action, bolt, and trigger components are properly lubricated.

In conclusion, poor accuracy in the Remington 710 is primarily due to design flaws, budget components, and inadequate quality control.

Frequently Asked Questions

Is the Remington model 710 a good gun?

The Remington Model 710 is a classic bolt-action rifle that has been a staple of the hunting and shooting world for more than four decades.

What is the barrel twist rate on a Remington 710?

Rate of Twist: 1 in 10 in

What type of rifle is Remington 710?

Entry-level hunting rifle.

The Remington 710 Receiver was Built With?