Are you experiencing issues with your Remington 7400? Don’t worry; we’ve got you covered. This guide will help you identify common problems and find solutions for them.
Some of the most common issues with Remington 7400 rifles are Failure to Extract, Jamming Issues, Clipping Soft Points, Won’t Go Into Battery, Magazine Problems, hammer Issues, and Accuracy Issues.
We’ll provide instructions on how to fix everything from jammed cartridges to misfired rounds, as well as advice on cleaning and proper maintenance of your gun. With these tips, you’ll be able to get your Remington 7400 up and running in no time.
Quick Overview of Remington 7400 Specs
- 1 Quick Overview of Remington 7400 Specs
- 2 What are the common problems with the Remington 7400?
- 3 3 Best Alternative Guns of Remington 7400
- 4 Conclusion
|Barrel Length||18-22 inches|
|Sling Swivel Studs||Yes|
|Stock Style||Traditional or Monte Carlo|
What are the common problems with the Remington 7400?
1. Failure to Extract
If your Remington 7400 is not extracting a spent casing from the chamber, then you are likely experiencing the “Failure to Extract” issue. This can happen for several reasons, including improper ammunition, excessive carbon build-up on parts of the action or even faulty internal components.
The first thing to do is ensure you use the correct bullets. Remington 7400 rifles are chambered for 30-06 Remington rounds, and nothing else should be used. If you have been using other ammunition, this could be the root of the problem.
If that is not the case, then it may be time to look closely at your rifle’s action. Carbon build-up can cause excessive friction inside the action, making it difficult for the bolt to extract spent casings. Cleaning your rifle’s action periodically can help prevent this issue from occurring.
Finally, if neither of these solutions resolves the problem, you may need to look at replacing internal components such as firing pins or extractors. If you do not feel uncomfortable performing these repairs yourself, contact a professional gunsmith for assistance.
2. Jamming Issue
Jamming is a common problem faced with the Remington 7400. If your firearm does not eject spent cartridges properly, you are likely experiencing a jamming issue.
Common causes of this can include dirt, debris, unburned powder or faulty parts within the action. Fortunately, there are some simple steps you can take to help reduce and prevent jamming in your rifle 7400.
The first step is thoroughly cleaning the action, including any springs or parts causing an obstruction.
Use a cleaning procedure specific to your firearm and only approved gun cleaning solutions.
Also, it’s important to inspect all moving parts for signs of wear or damage and replace them if necessary.
Next, you should check the magazine to ensure it is functioning properly. Ensure all the springs and pins are in place; replace them with new components. Also, ensure no dirt or debris interferes with the magazine’s function.
Finally, it would help if you examined your ammo for any damage or imperfections that could cause jamming.
Poorly loaded ammunition or old rounds can cause jamming issues. It is only important to use quality ammunition designed for your firearm.
3. Clipping Soft Points
If you own a R 7400, you might be familiar with the issue of clipping soft points. This issue typically appears when the magazine tube is loaded with several rounds, and the bullet nose is pushed into the chamber wall by the cartridge ahead of it.
The result is that cases become stuck in place and must be forcibly removed.
Fortunately, you can take several simple steps to ensure this issue does not occur.
The first step to prevent clipping soft points is to clean the chamber regularly. This will help eliminate any debris or buildup preventing your rounds from entering correctly.
In addition,, make sure to use only high-quality ammunition like deer bullets from Rem 180gr Soft Point round nose; low-quality cartridges may have shorter noses and are more susceptible to clipping.
If the issue persists, check the tension on your magazine spring. If it is too tight, then rounds may not be able to move freely within the tube.
By adjusting the spring tension correctly, bullets will move smoothly through the chamber when loaded.
Finally, ensure that you are using high-quality magazines. Magazines can sometimes be the source of issues, so it’s important to make sure they are in good condition and functioning correctly.
4. Won’t Go Into Battery
If your 7400 rifle won’t go into battery despite you carrying out regular maintenance and cleaning, it may be due to a few different causes.
There could be an issue with the firing pin, or an obstruction in the chamber that is preventing it from locking. It’s also possible that magazine tube problems or issues with the bolt are preventing your rifle from going into battery.
You’ll need to do a thorough inspection to identify the cause of your rifles’s inability to go into battery.
Start by inspecting the magazine tube and ensuring it is firmly in place.
Next, inspect the chamber area and check for any obstructions such as dirt or debris, that might prevent the bolt from locking into the battery.
If there are no obstructions in the chamber, you should check the firing pin and ensure it is not stuck or blocked.
Additionally, it may be worth examining the recoil spring assembly to ensure everything functions properly.
If all of these components appear to be working correctly, then it could be the case that your rifle’s extractor is not functioning properly and needs to be replaced.
Once you’ve checked all these components, it may be worth taking your Remington 7400 to a professional gunsmith if the issue seems beyond your level of knowledge or expertise.
5. Magazine Problems
Many Remington 7400 shooters have reported a common issue: failure to feed from the magazine. This problem can be traced back to a few trouble spots in the rifle’s design.
First, it’s important to understand that the magazines for the Remington 7400 are not designed for high-speed shooting. If you’re trying to fire rounds quickly, the magazine and follower may not properly cycle in time with each shot. This can lead to jams or misfires.
Second, the magazine spring is often weak and prone to fatigue over time. If it’s not replaced regularly, this can cause rounds to feed improperly into the chamber.
Finally, dirt and debris can easily get lodged in the magazine well. When this happens, rounds can get stuck or fail to feed properly.
The key to avoiding these issues is regular maintenance and replacement of parts when necessary.
6. hammer Issue
A hammer issue is a common issue among Remington 7400 owners, and the symptoms are easily recognizable.
Sometimes, the gun fails to complete its firing cycle when pulling the trigger and only hammers down on the empty chamber.
It is important to understand that this problem does not always indicate a malfunction of your rifle, but it can be caused by a number of factors.
To diagnose your rifle, we recommend inspecting the firing pin assembly and examining the primer for any signs of wear or damage.
You should also check that your rifle is properly lubricated and that all parts are correctly assembled.
In some cases, gun owners may find that debris has built up inside the firing pin chamber, in which case the rifle should be thoroughly cleaned and inspected.
7. Accuracy Issue
Accuracy issues in the Remington 7400 can be caused by a variety of factors, and should always be addressed before any other maintenance or repair efforts are undertaken. Here are a few things to look at if accuracy is an issue:
- Check the barrel and chamber for signs of excessive wear or rust. Clean and inspect the chamber and barrel to ensure no obstruction or damage prevents optimum performance.
- Inspect ammunition used in the gun for signs of wear, dents, or other deformities that could cause accuracy problems. Damaged ammunition can lead to inaccuracy at long-range targets.
- Be sure to use a properly sized cleaning rod when cleaning the barrel. Over-sized rods can cause damage to the rifling in the barrel, resulting in accuracy issues.
- Ensure that all your scope adjustments are set correctly and that your scope is properly mounted on the gun. Incorrect adjustments or a loose mount can result in poor accuracy.
- Check the receiver for signs of cracks or corrosion. Damage to the receiver can cause inaccuracy problems.
- Clean all parts of the gun thoroughly, including the bolt and firing pin assembly, to ensure that all components are free from dirt and debris that could cause accuracy issues.
- Inspect your shooting technique and form to make sure they are consistent with good marksmanship practices. Poor form or technique can cause accuracy issues at longer ranges.
3 Best Alternative Guns of Remington 7400
When considering a gun that rivals the performance of Remington 7400, three contenders immediately stand out – the Remington 750, Winchester 100 and the Remington 742. Each of these guns have their own advantages and provide users with solutions for different scenarios.
Here’s what you need to know about each one:
The Remington 750
The Remington 750 is an improved version of the original 7400 model, offering a higher caliber (.308) and greater accuracy.
It also features a synthetic stock and chrome-lined barrel, making it much more efficient than its predecessor. It is lightweight yet durable, making it perfect for hunters or target shooters alike.
The Winchester 100
The Winchester 100 is a classic, reliable firearm. It features a walnut stock and blued steel barrel, making it tough and rugged. It can also chamber multiple calibers, such as .308 Winchester or .30-06 Springfield, allowing users to adapt to different scenarios.
The Remington 742
The Remington 742 is the perfect choice for shooters who want to stay true to the Remington brand. It offers similar features as the original 7400 model but has been designed with modern technology in mind.
The synthetic stock and stainless steel barrel make it incredibly durable yet lightweight, allowing users to shoot accurately without compromising on comfort.
Frequently Asked Questions
How can I solve problems with the gas system?
Problems with the gas system can be solved by thoroughly cleaning the gas port and gas block, ensuring they are free from any debris or obstruction.
Why does my Remington 7400 fail to cycle properly?
There could be several reasons for the failure to cycle properly, such as a lack of maintenance, dirty or corroded parts, or issues with the bolt assembly. Keeping your rifle clean and well-lubricated is important to ensure optimal functioning.
What can I do if my Remington 7400 has feeding problems?
If you are experiencing feeding problems, try using good quality factory ammunition and ensure the rifle is properly lubed. Cleaning the rifle’s action and magazine can also help resolve feeding issues.
How can I improve the accuracy of my Remington 7400?
To improve accuracy, ensure the rifle is properly sighted in and the barrel and gas system are clean. Using high-quality ammunition and practicing good shooting techniques can also help improve accuracy.
Can I reload ammunition for my Remington 7400?
Yes, you can reload ammunition. However, it is important to follow proper reloading procedures and use suitable components for your rifle.
Is the Remington 7400 a good hunting rifle?
It is widely used as a hunting rifle, particularly for deer hunting. With proper maintenance and care, it can be an excellent choice for hunting.
How often should I clean and oil my Remington 7400?
It is recommended to clean and oil your 7400 after every use or at least once every few months, depending on usage. Regular maintenance will help ensure the longevity and reliability of your rifle.
Can I use the Remington 7400 for long-range shooting?
It is primarily designed for hunting, it can be used for long-range shooting with proper ammunition and practice. However, its semi-auto gas system may not offer the same level of accuracy as a bolt action rifle.
Is the Remington 7400 similar to the Springfield 740?
No, the it and the Springfield 740 are different rifles. The 7400 is a semi-auto hunting rifle, whereas the Springfield 740 is a bolt-action rifle.
The Remington 7400 is a highly regarded semi-automatic rifle that is known for its exceptional performance at 300 yards, especially when it is well-maintained and lubricated. Many gun enthusiasts consider it to be one of the best rifles crafted by Remington, and it has garnered a dedicated following.
However, it is worth noting that some users have expressed concerns and complaints about this model.
As a result, opinions on the Remington 7400 can be divided, with varying experiences reported. It is recommended that individuals exercise personal discretion when considering a purchase.