Common Remington V3 Problems And Their Solutions

The Remington V3 shotgun is popular among hunters, sportsmen, and shooting enthusiasts due to its reliability, durability, and versatility.

Remington V3 Problem

However, like any other mechanical device, it is not immune to malfunctions and performance issues.

This article will explore some common Remington V3 problems that users may encounter, such as feeding and cycling issues, trigger problems, and malfunctioning gas systems.

Common Remington V3 problems are failure to feed, jamming, the bolt getting stuck, loading issues, ammunition sensitivity, Firing Pin Breakage, Barrel Problems and more.

Additionally, we will provide solutions and tips to help you troubleshoot and fix these problems, so you can continue to enjoy using your Remington V3 shotgun with confidence and ease.

Common Remington v3 Shotgun Problems And Their Solutions

1. Failure To Feed

What is the Failure to Feed problem with Remington v3 Shotguns?

The Failure to Feed (FTF) problem encountered by users of Remington v3 shotguns refers to a malfunction in which the shotgun shell fails to move from the magazine into the chamber. Various factors, including weak magazine springs, poor ammo quality, faulty cartridges and incorrect assembly of shotgun components, can cause this issue.


Weak Magazine Springs:

As shotguns are used over time, their springs become weaker and less able to move ammunition from the magazine into the chamber. Weak magazine springs will cause shells to jam and not feed properly, leading to a FTF issue.

Poor Ammo Quality: Poor quality ammunition may contain defective primers or shells that are too long or too short for your particular shotgun model.

These issues can cause FTF problems, preventing shells from moving smoothly through the gun barrel and into the chamber.

Faulty Cartridges:

Defective cartridges can cause FTF problems as they do not allow sufficient space between them and other shells, preventing smooth movement out of the magazine. Faulty cartridges also often fail to fire properly once they enter the chamber, resulting in an incomplete round that is either jammed or ejected back out of the gun barrel.

Incorrect Assembly: The improper assembly or installation of shotgun components can lead to FTF issues due to misalignment or interference between parts that should work together smoothly. A loose bolt handle, for example, could create a gap between it and other parts that would interfere with proper feeding from the magazine into the chamber.


Replacing Weak Magazine Springs: 

If you suspect your FTF issue is due to weak springs in your shotgun’s magazine, then replacing these springs should solve this problem.

You can purchase new replacement springs directly from Remington or through third-party suppliers online at reasonable prices. Make sure you get compatible replacements or else there is still a chance for FTF issue even after replacement.

Using Quality Ammunition: 

Investing in quality ammunition will greatly reduce your chances of experiencing issues related to ammo quality, such as defective primers and improperly sized shells that may prevent proper rounds feeding into your gun’s chamber.

Avoid buying cheap rounds from unknown sources as these are more likely than not substandard shotshells that won’t work properly with your Remington v3 shotgun.

Checking for Incorrect Assembly: 

Inspect all shotgun components if you have experienced several cases of FTF with no apparent explanation, as this could indicate incorrect assembly during maintenance or cleaning sessions previously conducted on your gun.

Ensuring all parts are correctly installed and aligned will ensure smooth performance when loading rounds into your Remington v3’s chamber without any FTF problems occurring each time you use it.

Jamming Problems

Shotguns are popular firearms for hunting, sport shooting, and home defense but require regular maintenance.


The most common cause of jamming shotgun is fouling from dirt or residue buildup inside the barrel or action.

Over time, carbon buildup from fired shells accumulates in the chamber and bore of the gun, leading to poor cycling and jams. Excessive lubrication on shell surfaces can cause jams when shells stick together in the magazine tube or chamber. Additionally, corroded parts can malfunction due to worn-out springs or other parts that no longer fit correctly.

Finally, shotguns can also jam if not properly cleaned after heavy use or exposure to extreme temperature changes.


The first step in fixing a jammed shotgun is clearing it safely by unloading all shells from the gun and inspecting them for any damage or debris that could be causing the problem.

After clearing the gun, inspect all parts for signs of wear and tear, such as bent springs or loose screws and replace them if necessary. You should also clean all surfaces with solvent-soaked patches and brush away any dirt or carbon buildup from inside the barrel and action before lubricating all moving parts with an approved oil or grease product.

Finally, check for proper function by cycling several empty shells through the firearm before loading live rounds into it again.

3. Issues With The Bolt

A stuck bolt is a common issue with shotguns; it is important to understand the causes and how to resolve it.

Several potential causes exist for a stuck bolt on the Remington v3 shotgun. One possible cause is a buildup of dirt, debris, or carbon on the bolt carrier, in the chamber, or along the firing pin groove that prevents the bolt from moving freely.

Another possibility is that the firing pin spring has become worn out or broken, preventing the firing pin from engaging properly with the cartridge. Finally, an issue with the extractor assembly may prevent the cartridge from properly extracting from the chamber.

Solving The Issue:

When troubleshooting a stuck bolt, there are several steps you can take to try and resolve it:

Ensure that any dirt or debris in the chamber has been thoroughly removed, and for that you can use bolt carrier group so that it does not impede the movement of the bolt.
Check to see if any parts of the extractor assembly have worn down or broken; if so, they should be replaced as soon as possible to prevent further issues.
Inspect and replace any components related to the firing pin, such as springs and pins, if necessary to ensure proper function.

4. Failure to Extract

FTE occurs when the cartridge does not fully eject from the gun, which a few factors can cause. To help you diagnose and solve this issue, here are some step-by-step solutions that may help you get back to shooting.

First, look at the design of your shotgun. Are there any obvious mechanical defects that might be causing FTE? If so, you’ll need to send the gun in for repair or have it serviced by a certified professional. If not, you’ll need to look closer at the ammunition itself.

Next, inspect your ammo for signs of damage or wear. Check for any dents in the cartridge casing and visible corrosion on the bullet. Also consider whether or not your ammunition is too powerful for your shotgun’s chamber size; if it is, you’ll need to reduce your load or switch to lighter rounds.

Finally, check how clean and well-oiled your shotgun is. A dirty or dry gun can cause FTE due to increased friction and wear on moving parts like extractors and ejectors. Make sure all of these components are properly lubricated and free of debris before each use; this will reduce the likelihood of FTE occurring in the future.

By following these steps and regularly inspecting your equipment and ammo, you should be able to limit or eliminate FTE.

5. Firing Pin Breakage

Firing pin breakage is a common problem for many gun owners, and understanding the causes and how to fix it can help you keep your firearm in good working order.

Firing pins can weaken or damage from consistent use, leading to eventual breakage. Other causes of firing pin damage can include improper cleaning or lubrication of the gun, using low-quality ammunition, not properly oiling the bore after shooting, incorrect reassembly after cleaning, or a faulty firing pin design. Dry firing can also cause premature wear on the firing pin and its components due to excessive friction with the bolt face.

First, disassemble your gun according to manufacturer instructions to repair or replace your broken Remington v3 shotgun’s firing pin. Remove all parts that were previously holding in place by either unscrewing them with a screwdriver or by pressing out any pins. Once all parts have been removed and set aside for later reassembly, inspect the interior for any visible signs of wear or damage on the existing components. If damaged components are found, these should be replaced before continuing with further repairs.

Next, check that the new replacement part fits correctly into place and is snugly secured within its designated area before replacing all other components into place. Once reassembled, test fire to ensure that it functions properly with no issues before returning it to regular use. Suppose problems are still encountered about functioning of the new part being installed.

6. Barrel Problems

Barrel issues are one of the most common problems with Remington v3 shotguns.

A variety of factors can cause barrel problems. For example, improper cleaning or maintenance can lead to residue build up inside the barrel, which can cause rusting and eventually impair accuracy or performance.

Additionally, certain types of ammunition, such as with steel shot cartridges or magnum loads, can cause excessive stress on the barrel over time.

This can result in bulging or eventual cracking of the barrel walls. Furthermore, it’s also possible that an obstruction of some kind has become lodged within the barrel itself, resulting in blockage and accuracy issues.

Fortunately, fixing any of these issues is relatively straightforward. The first step is to inspect and identify any potential sources of damage or obstruction. After that, the next step is to carefully clean out any dirt, debris or residue from exterior and interior surfaces using a gun cleaning solvent and lint-free cloths or cleaning brushes designed for firearms use.

Additionally, you’ll want to check for any signs of corrosion or wear/tear on the exterior surfaces and look for bulges along the length of the barrel wall when viewing from a distance with a good light source available.

Once all these steps have been completed, apply a lubricant such as gun oil to all moving parts on your Remington v3 shotgun, including its action components (bolt & slide mechanism) and barrel wall. Using appropriate ammunition when firing is also important to avoid unnecessary stress on its components over time.

Finally, if any signs of structural damage are identified, then it’s recommended that you contact an authorised technician immediately to discuss repair options before further damage occurs.

7. Ammunition Sensitivity

One of the most common reasons for ammunition sensitivity is bad or damaged primers. The primer ignites the fuel in ammo so the gun can fire properly.

When these primers are faulty, they may not ignite properly, resulting in a misfire or no firing. Another potential cause of this issue is improper chambering.

Using incorrect ammo for your particular gun model can lead to issues like misfires and jams due to improper fit in the chamber. Finally, dirt or debris buildup inside the action can also cause problems with firing.

To start troubleshooting this issue, first check that every round of ammo you use is appropriate for your particular model of Remington v3 shotgun.

Then inspect each round to ensure the primers are free from any damage or irregularities. If anything is out of place, try replacing those rounds with new ones or cleaning them off before reloading them into the gun’s magazine tube again.

Once you’ve ensured proper ammunition selection and inspected each primer, run through an internal cleaning on your gun to eliminate any dirt or debris buildup inside its action mechanism.

Finally, test out a few rounds in an open area to ensure everything functions properly before returning to the field.

8. Trigger Group Issues

Trigger group problems can be a major cause of frustration and annoyance for many gun owners.

Trigger groups usually comprise several complex components that work together to make the shotgun fire when the trigger is pulled. Issues can occur when the parts malfunction or wear out due to regular use.

Common causes of trigger group problems include worn-out parts, improper maintenance, bad ammunition, excessive force on the trigger, dirt or other debris in action, and incorrect assembly.

Fortunately, most problems with Remington v3 shotguns can be fixed through a few simple steps. The first thing to do is ensure that all components are properly cleaned and lubricated.

This includes removing any dirt or debris inside the action and ensuring all the moving parts have enough lubrication to move freely without binding or sticking. Any moving parts that appear worn or damaged should be replaced with new ones before continuing.

Next, check for any loose screws or pins around the trigger group.

Make sure all screws are tightened securely and that any pins are firmly held in place by their respective springs or bushings. Once everything is properly inspected and adjusted, it’s time to test fire the weapon using dummy rounds (or snap caps) to ensure everything functions as it should.

9. Loading Problems

This issue can be incredibly frustrating, and it’s important to take the time to identify the cause of your gun’s loading problems to find a solution.
An improperly installed or broken shell latch is the first potential cause of loading problems.

A properly functioning shell latch should secure the shells into place until they’re ready to be released. If this part is damaged or improperly installed, it could lead to shells not staying in place when loading them into the shotgun.

To check if this is causing your problem, closely examine the area around the latch for any signs of damage.

If you see anything that looks abnormal, you’ll want to consult with a qualified firearms professional who can help you repair or replace the damaged parts.

Another possible cause is an issue with your action spring tension.

If this spring is too weak, it can prevent you from easily pushing down rounds into the chamber, making it difficult for them to stay in place when loaded.

To test whether or not weak spring tension is causing your problem, inspect the action spring for any signs of corrosion or wear and tear. If there seems to be something wrong with your spring, consider replacing it before attempting further troubleshooting steps.

Finally, an issue with a broken magazine tube could also be causing your Remington v3’s loading problems.

Magazine tubes are responsible for holding both rounds and shells until they’re ready to fire so if yours becomes damaged or worn out over time due to use, it could cause difficulty during loading attempts.

To check if this part needs replacing, remove it from your gun and closely examine both its inside and outside surfaces for signs of damage or rusting. If you discover that something is wrong with your magazine tube, consider getting a new one from a reputable firearms store before continuing with further troubleshooting steps.

What Does The User Think About Remington V3 Shotgun

The Remington V3 Shotgun is a powerful and reliable gun for hunting or self-defense. Many users have expressed positive opinions about the shotgun’s accuracy, durability, and dependability.

It features a patented Versaport gas system that cycles a wide range of light to heavy loads with very low recoil and great reliability.

The crossbolt safety ensures easy handling, while the ergonomic stock design makes it comfortable to carry and shoot.

Additionally, the Remington V3 is equipped with adjustable shims for custom fit and comes with advanced features like an interchangeable choke system that allows users to tailor their shooting experience.

For those seeking more firepower, the shotgun offers an optional detachable magazine system that simultaneously holds up to five shells.

it is an impressive firearm with exceptional performance and reliability for hunters and those seeking effective self-defense.

Frequently Asked Questions

Is the Remington V3 still made?

Yes, the Remington V3 is still in production

Is the Remington V3 drilled and tapped?

Yes, the Remington V3 is drilled and tapped. This allows the user to attach various accessories, such as a scope, bipod, or sling.

Does Remington V3 use REM chokes?

Yes, the Remington V3 shotgun does use REM chokes.

Is Remington V3 gas or inertia?

The Remington V3 shotgun is gas-operated

Can a Remington V3 shoot slugs?

Yes, the Remington V3 can shoot slugs

Can a Remington V3 shoot 3 1 2 shells?

Yes, the Remington V3 can shoot 3 1/2 inch shells

What material is the receiver on a Remington V3?

The receiver on the Remington V3 is made of high quality aluminum alloy. It is designed for maximum strength and durability. The receiver is also coated with a black oxide finish for corrosion resistance.


In summary, the Remington v3 has some flaws that users commonly experience. Fortunately, there are simple solutions that can be employed to rectify the majority of these issues.

Following the advice outlined in this post, users should be able to keep their beloved Remington v3 running effectively and efficiently.

That said, it’s still important to stay mindful of potential problems that might arise with regular use of your machine. And in addition to going through the steps of troubleshooting any issue you have, purchasing an extended warranty can also provide peace of mind should something bad occur.

The bottom line is that users need not fear common problems when using their Remington v3; instead, they can embrace them as opportunities to learn more about their machines and how to maintain them properly. Thank you for reading!