Ruger 57 Problems And Their Solutions

The Ruger 57 is a popular firearm in the gun community, known for its impressive accuracy, power, and shooting ability. With its innovative design, the Ruger 57 has quickly gained a devoted fanbase since its release in 2019.

While the Ruger 57 is generally a reliable and sturdy handgun, some users may encounter common issues that can affect its performance.

These issues include Failure To Feed, Jamming Problems, Magazine Problems, Safety Levers Problems, Ejector Problems, Trigger Problems, and Stovepiping.

This article will delve into some of the most common problems that Ruger 57 pistol users may encounter and potential solutions.

Ruger 57 Problems

We will also provide tips for maintaining and caring for your Ruger 57 pistol to ensure optimal performance.

By the end of this article, you will have a comprehensive understanding of how to troubleshoot and maintain your Ruger 57 and a greater appreciation for this top-quality firearm.

Ruger 57 Specs

Specification Details
Caliber 5.7x28mm
Capacity 20 rounds
Barrel Length 4.94 inches
Sights Adjustable rear sight, fiber optic front sight
Grips Textured polymer grips
Safety Ambidextrous manual safety, trigger safety
Weight 24.5 ounces

Common Ruger 57 Problems And Their Solutions

1. Failure To Feed

As per our survey, many users experienced Failure to feed (FTF) issues with Ruger 57 pistol. They are irritated with this issue as it is occurring again and again.

Failure to feed can occur due to several reasons. One of the most common reasons is a magazine issue.

If the magazine is not working properly, then it can lead to numerous feeding problems.

Similarly, low-quality ammunition can also cause the same issue. It is recommended to invest in quality ammunition to avoid feed-related issues.

Another potential cause for failure to feed is a dirty or fouled firearm.

After repeated use, dirt and grime build up can affect how your firearm functions. A worn-out recoil spring can also lead to failure to feed problems.

Also, check the standard of the extractor, if extractor is bent, then you need to replace it quickly.

If the recoil spring does not keep your gun in the correct position, it can impact the feeding process.

To fix these issues, it is important to take the necessary steps. Firstly, check your magazine functionality and ensure that it is well-maintained.

Secondly, use high-quality ammunition to avoid any feed issues.

Thirdly, regularly clean and lubricate your firearm to prevent dirt build-up and fouling. Finally, replace worn-out recoil springs with new ones to maintain the proper position of the gun.

2. Firing Pin issues

Firing pin issues can be caused by dirt, debris, or damage to the firing pin itself.

The good news is that this is a common problem and can be fixed with a few simple steps that you can do at home.

The first step in fixing a firing pin issue is to remove the slide from the frame.

Once you have removed the slide, check the firing pin for any visible damage or corrosion.

If you notice any damage, replace the firing pin as soon as possible. If the firing pin looks okay, move on to the cleaning phase.

To clean the firing pin, use a solvent and a small brush to remove any accumulated dirt or debris. Be sure to clean all areas of the firing pin thoroughly.

Then, use a dry cloth to remove any excess solvent. Once the firing pin is clean, apply a small amount of lubricant to ensure smooth operation.

After cleaning and lubricating the firing pin, reassemble the firearm and test-fire it to ensure that the firing pin issue has been resolved.

If you are still experiencing issues, it may be best to consult a qualified gunsmith for further assistance.

2. Jamming Problems

One of the main causes of jamming in firearms is a lack of maintenance.

Over time, dirt, debris, and even excess lubrication can build up and prevent the gun from functioning properly.

Using the wrong ammunition or damaged magazines can also lead to jamming problems.

To fix these issues, the first step is to ensure your Ruger 57 pistol is properly cleaned and lubricated.

This should be done after every use, or at least every few hundred rounds fired. Use proper cleaning tools and solutions, and follow manufacturer recommendations.

Next, double-check that you are using the correct ammunition for your firearm, as using the wrong type can lead to malfunctions.

Also, inspect your magazines for any cracks or damage, and replace as necessary.

If these steps do not solve the jamming issue, seeking a professional gunsmith’s assistance may be necessary for further diagnosis and repair.

3. Magazine Problems

Are you experiencing issues with your firearm’s magazine? It’s not an uncommon problem, but fortunately, there are several ways to fix it.

Let’s take a look at some of the main causes of magazine problems and how to address them step by step, without having to repeat the name “Ruger 57 constantly”.

A weak mag spring is one of the most common culprits for magazine problems. Over time, the spring can lose its tension and fail to push the rounds up properly, causing feeding issues.

To fix this problem, you can replace the magazine spring with a new one with the proper tension. You can find these replacement springs online or at your local gun store.

Another potential issue is follower problems. The follower is the component inside the magazine that pushes the rounds up towards the feed lips.

If the follower is worn out or damaged, it can cause feeding issues. To fix this problem, you can replace the follower with a new one compatible with your magazine.

Lastly, magazine lips or feed ramps can also cause feeding issues. If these are misaligned or damaged, they can prevent proper round feeding.

To fix this issue, you may need to file down any burrs or rough spots on the lips or feed ramp. Be sure to use a fine file and take your time to avoid removing too much material.

4. Safety Levers Problem

The safety mechanism is no longer reliable when the safety lever issue arises.

The primary concern is firearm discharge. The safety lever either fails to engage, disengage or otherwise impedes the firearm’s performance.

This issue is prevalent in firearms, including the Ruger 57 weapon, used for an extended period.

Two main causes of safety lever problems are natural wear and tear over time and improper handling or maintenance.

Over time, the safety lever gets stressed and may bend, which could result in a malfunction.

Improper handling or maintenance, such as dropping or not cleaning the firearm properly, may also lead to safety lever problems.

Fortunately, there are steps you can take to address this issue. If your firearm has a safety lever problem, you should first ensure you know how to dismantle it correctly.

Then, inspect the safety lever and surrounding components for any damage. If you find any damage, you may need to purchase replacement parts.

Also, check your firearm’s manual or consult with a certified firearm technician to ensure you follow the correct protocol.

5. Ejector Problems

One common cause for ejection problems is a weak ejector spring. The ejector spring is responsible for pushing the spent casing out of the chamber and into the ejection port.

Over time, this spring can lose tension and lead to ejection failure.

You can replace the ejector spring with a new one to fix this issue. This can be done by removing the slide from the firearm’s frame and accessing the ejector assembly.

Another potential cause for ejection problems is a fouled ejector channel.

Debris and fouling can build up in the channel over time, causing the spent casings to stick and fail to eject completely.

You can clean the ejector channel using a cleaning solvent and a small brush to fix this issue. This will help to ensure that the spent casings can move freely through the channel and be ejected properly.

Lastly, a failing magazine spring can also cause ejection problems on the Ruger 57 pistol.

The magazine spring is responsible for pushing the ammo up to the chamber, and if it is weak or damaged, it can lead to failures in the ejection process.

You can replace the magazine spring with a new one to fix this issue.

6. Trigger Problems

Many people complaint about the trigger issue with this handgun.

One common cause of trigger issues is corroded trigger components. Over time, moisture can build up and cause rust or corrosion in the trigger assembly.

Disassemble the trigger and thoroughly clean all components using a gun-cleaning solvent and a brush to fix this. Be sure to dry thoroughly before reassembling.

A misaligned or worn trigger bar can also cause issues. This can happen over time due to regular use or from other types of wear and tear.

To fix this, disassemble the trigger group and examine the trigger bar for any signs of wear or misalignment.

If the trigger bar needs to be replaced, order a new one and install it according to the manufacturer’s instructions.

Finally, a damaged or improperly installed trigger pivot pin can also cause trigger problems. This can result in a loose trigger or one that doesn’t function properly.

To fix this, disassemble the trigger assembly and examine the pivot pin for any signs of damage or improper installation.

Replace the pivot pin if necessary and reassemble the trigger group according to the manufacturer’s instructions.

7. Stovepiping

Stovepiping occurs when a spent casing fails to eject from the chamber fully and gets stuck vertically in the ejection port, resembling a stovepipe.

There are several reasons why stovepiping can happen. Firstly, a faulty extractor might be unable to forcefully grip the spent casing firmly enough to extract it from the chamber.

Secondly, a dirty or fouled firearm can impede smooth operation, causing issues with the feeding and ejection of rounds.

A worn-out recoil spring might not provide enough force to cycle the slide properly, leading to stovepiping as well.

Lastly, improper grip or limp-writing can cause the firearm to cycle improperly, causing spent casings to fail to eject completely.

Fortunately, there are simple steps you can take to fix these issues. Firstly, check your extractor and ensure it’s in proper working order. It may need to be replaced if bent or worn out.

Secondly, ensure your firearm is clean and well-lubricated to optimize its performance.

Thirdly, check your recoil spring and replace it if necessary, particularly if you notice a decrease in recoil.

Lastly, ensure your grip is firm and avoid limp-writing, which can cause misfeeds and stovepiping.

What Do The User Think About Ruger 57

After conducting extensive research on the internet, the opinions of Ruger 57 users seem to be quite mixed.

While some users absolutely love the firearm for its phenomenal accuracy and impressive performance, others feel that it falls short in certain aspects.

One of the standout features that users seem to appreciate about the Ruger 57 is its exceptional accuracy.

Many have reported being able to shoot with pinpoint precision and comfortably hit targets at long ranges.

Additionally, users praise the firearm for its reliable functionality, with many reporting little to no malfunctions or issues with the weapon.

However, users also raise some concerns about the Ruger 57, including its weight and size. Some users commented that the firearm is slightly too bulky or heavy, making it less ideal for everyday carry or extended use.

Additionally, some have expressed concern over the steep price point, which may make the firearm less accessible to certain consumers.

Overall, while there seems to be some mixed feedback on the Ruger 57, it is clear that this firearm has carved out a dedicated fanbase due to its impressive accuracy and reliable performance.

3 Best Alternatives To Ruger 57 Handgun

If you’re considering the purchase of the Ruger 57 handgun, it’s always beneficial to explore alternative options that may better suit your specific needs.

With that in mind, we have compiled a list of the top three best alternatives to the Ruger 57.

1. Kel-Tec P50

First on our list is the Kel-Tec P50. This innovative handgun features a unique design that allows for a low bore axis, which translates to reduced recoil and improved accuracy.

The P50 also boasts a large magazine capacity of 50 rounds, making it an ideal choice for those who value extended firing sessions without the need for frequent reloading.

2. The FN Five-Seven

The FN Five-Seven is another excellent alternative to the Ruger 57. This handgun has been praised for its lightweight construction, high-capacity magazine, and superior accuracy.

Additionally, the Five-Seven is chambered in the unique 5.7x28mm cartridge, which offers reduced recoil and exceptional power.

3. FN America Five-Seven Mark II

Finally, we have the FN America Five-Seven Mark II. This updated version of the original Five-Seven boasts several improvements, including an improved trigger, enhanced ergonomics, and a high-capacity magazine.

Like its predecessor, the Mark II is chambered in the 5.7x28mm cartridge, which delivers impressive velocity and accuracy.

In summary, the Kel-Tec P50, FN Five-Seven, and FN America Five-Seven Mark II are three outstanding alternatives to the Ruger 57 handgun. Each option offers unique features and benefits that may better suit your shooting style and preferences. We hope this information helps you make a well-informed decision and find the handgun that’s right for you.

Frequently Asked Questions

1. What are the technical specifications of the Ruger 57 pistol? 

The Ruger 57 features a 4.94-inch barrel length, an overall length of 8.65 inches, and a weight of 24.5 ounces. It boasts a capacity of 20+1 rounds of 5.7x28mm ammunition, with adjustable sights and an ergonomic grip for enhanced accuracy and handling.

2. What sets the Ruger 57 apart from other handguns in its class?

The Ruger 57 is notable for its innovative use of the 5.7x28mm cartridge, which delivers superior velocity and accuracy compared to traditional handgun rounds. Its lightweight polymer frame also makes it comfortable to handle and shoot, while its sleek design adds to its visual appeal.

3. Is the Ruger 57 suitable for self-defense?

Yes, the Ruger 57 is a reliable and effective option for self-defense. Its high-capacity magazine and superior accuracy make it well-suited for personal protection, while its compact size and lightweight design ensure that it is easy to handle and use in tense situations.

4. How is the Ruger 57’s recoil compared to other handguns in its class?

The Ruger 57 is designed with a low-recoil system that significantly reduces felt recoil, making it more comfortable and accurate to shoot than other handguns in its class.

This is thanks to its specially designed slide that directs recoil forces away from the shooter’s hand, minimizing muzzle flip and allowing for better control.

5. Can the Ruger 57 be used for recreational shooting as well as self-defense? 

Absolutely! The Ruger 57 is a versatile handgun suitable for recreational shooting and self-defense purposes. Its superior accuracy and handling make it a popular choice for target shooting, while its compact size and lightweight design make it easy to transport and use on the go.

6. How does the Ruger 57 compare to other handguns in its price range?

The Ruger 57 offers exceptional value for its price, delivering superior performance and versatility compared to other handguns in its class.

Its unique use of the 5.7x28mm cartridge and low-recoil system make it a standout choice for discerning shooters who value accuracy, reliability, and innovation in their firearms.


It’s important to remember that even though the Ruger 57 is an excellent choice in terms of performance, comfort, and precision, there isn’t a gun out there that’s completely free of issues.

It is common to encounter issues with the Ruger 57, but they are usually easy to resolve. These problems are typical and can happen with any firearm.

Related Posts:

Ruger SR1911 Problems

Ruger P90 Problems

Ruger SR9 Problems

Ruger SR45 Problems

Sig P365 Xl Problems

Ruger Max 9 Problems