Savage MSR 10 Hunter Problems And Their Solutions

The Savage MSR 10 Hunter is a highly regarded rifle in the hunting and shooting community for its reliable performance and impressive features.

It comes with a high-performance gas system, adjustable gas block, free-floating barrel, and Magpul MOE stock making it a top choice for serious hunters and shooters.

However, like any piece of equipment, it may encounter issues from time to time that can affect its functionality.

In this article, we will take a look at some common problems that Savage MSR 10 Hunter owners may experience and provide solutions to help address these issues.

Savage MSR 10 Hunter Problems And Their Solutions

So, let’s dive in and discover how to optimize your Savage MSR 10 Hunter’s performance and get the most out of your hunting experience.

1. Failure To Feed

Are you experiencing a failure to feed with your Savage MSR 10 Hunter rifle? This issue can be frustrating and could potentially disrupt your hunting experience.

The main cause of this failure-to-feed issue is typically related to the magazine or the ammunition feed system. Let’s take a closer look at how to fix this issue step by step.

The first step is to check the magazine. Make sure it is clean, and free of debris, and all parts are in good working order.

Next, check to see if the ammunition is in the correct caliber and is seated properly in the magazine. Any misalignments could cause feeding issues.

If the problem is not the magazine, the next step is to check the feed system. Inspect the chamber for any obstruction or debris that could be preventing the ammunition from feeding properly.

It may be necessary to disassemble the feed system and clean it thoroughly. Make sure all parts are properly lubricated and in good condition.

Another potential cause of failure to feed is a weak recoil spring. Over time, the spring may lose its tension and be unable to properly cycle the action. If this is the case, replace the recoil spring with a new one.

2. Fail to Extract 

People who use this rifle are facing fail to extract problems. So let’s take a look at the causes and their solutions.

This issue can cause delays in shooting, damage to your firearm, and even endanger your safety.

The main cause of a failure to extract in the Savage MSR 10 Hunter is often related to the extractor itself.

Typically, the extractor will become worn or damaged over time, resulting in weak or inconsistent extraction.

Additionally, the extractor tension may be too loose or too tight, causing it to either slip off the rim of the casing or hold onto it too tightly, respectively.

To fix this issue, there are a few steps that can be taken.

First, ensure that the firearm is unloaded and safely secured.

Then, remove the bolt assembly from the rifle according to the user manual instructions.

Take a close look at the extractor to determine if it is visibly damaged or worn. If necessary, replace the extractor with a new one.

Next, adjust the extractor tension to the appropriate level.

To do so, use a small flat-head screwdriver to turn the extractor spring screw located on the underside of the bolt shroud.

Turning the screw clockwise will increase the tension, while turning counterclockwise will decrease it.

It’s important to make small adjustments and test the tension between each change until the desired level is achieved.

Finally, reassemble the bolt assembly and perform a safety check before resuming shooting.

With these steps, you should be able to fix any fail-to-extract issues with your Savage MSR 10 Hunter and get back to enjoying a reliable and accurate shooting experience.

3. Magazine Problems

Magazine problems can be frustrating and can significantly affect your shooting performance.

The main causes of magazine issues in the Savage MSR 10 Hunter are often related to feeding and ejecting rounds.

These issues can be caused by a variety of factors, including magazine design or construction, ammunition types, and user error.

One common issue is the failure of the magazine to feed the next round properly, which can result in misfires or even stoppages.

This can be caused by a weak spring, improper magazine storage or loading, or poor ammunition quality.

To solve this issue, first, ensure that your magazine is clean and free of debris.

Next, make sure that you are using the correct ammunition and that it is properly loaded into the magazine.

If the problem persists, consider replacing the magazine spring or seek out professional help.

Another issue is the improper ejection of spent casings, which can lead to the accumulation of debris and further malfunctions.

This issue can be caused by a worn-out magazine or weak ejection spring.

To fix this problem, disassemble the magazine and clean any debris that may have accumulated. If the issue persists, replace the magazine with a new one.

In addition to these issues, magazine problems can also occur due to user errors such as overloading, underloading, or slamming the magazine into the gun.

Avoid these mistakes and follow your manufacturer’s instructions when using your Savage MSR 10 Hunter.

4. Trigger Problems

Trigger problems can significantly affect your hunting or shooting experience.

Various factors may cause trigger issues, including factory defects, incorrect adjustments, and mechanical failure, among others.

One of the leading causes of trigger problems is insufficient lubrication. Over time, gun oils can dry up, causing friction between the internal parts of the rifle.

Trigger issues may also arise if the grit or dirt accumulates on the trigger’s working parts.

Besides, improper adjustments or poorly fitted triggers can cause trigger problems.

To fix trigger problems, you need to understand the root cause of the issue.

If the problem results from insufficient lubrication, you should clean and oil the trigger group thoroughly.

You can use good quality gun oil to lubricate the trigger parts effectively.

In instances where dirt or grit caused the problem, it’s essential to disassemble the rifle and carefully clean all the trigger parts with an appropriate solvent.

You should also remove any debris from the trigger group using compressed air.

If the trigger problem results from poor fitting or incorrect adjustments, it’s vital to have an experienced gunsmith take a look at the rifle.

They will be able to assess the problem, and disassemble and reassemble the rifle with precision.

5. Misfires

Misfires are a common issue that can affect any firearm, and they can be caused by a variety of factors.

The good news is that most misfires can be easily fixed with the right approach.

One of the most common causes of misfires is issues with ammunition.

If your rounds aren’t seated properly in the chamber or if they have defects, they may not ignite properly when you pull the trigger.

To fix this issue, make sure you’re using high-quality ammunition that’s in good condition.

Take care when loading rounds into the magazine, and ensure they’re seated properly.

You may also want to clean and lubricate your gun regularly to prevent debris from interfering with the ignition process.

Another potential culprit of misfires is a problem with the firing pin.

If the pin is damaged, worn, or dirty, it may not be striking the primer with enough force to ignite the round.

To remedy this issue, carefully disassemble your firearm and inspect the firing pin for signs of damage or wear.

If necessary, clean or replace the pin to ensure it’s functioning properly.

Lastly, misfires can also be caused by issues with the trigger or firing mechanism.

If the trigger pull is too light, it may not be releasing the firing pin with enough force to ignite the round.

Similarly, if the firing mechanism is dirty or damaged, it may not be functioning properly.

To fix these issues, it may be necessary to take your firearm to a professional gunsmith for repairs or modifications.

6. Gas Block and Gas Tube

These components play a crucial role in the functioning of your firearm and can cause serious problems if not properly maintained.

One of the main causes of gas block and gas tube issues is fouling or debris buildup.

When carbon and other residue build up in the gas block and tube, it can restrict the flow of gas and cause malfunctions such as failure to feed or eject.

To fix this issue, the gas block and tube should be cleaned regularly with a solvent and a brush specifically designed for firearms.

It’s important to disassemble the components and thoroughly clean all parts, including the gas port, holes, and gas key.

A light coating of oil can be applied to prevent corrosion and ensure smooth functioning.

Another cause of gas block and gas tube issues can be related to the gas rings on the bolt carrier. If these rings are worn or damaged, gas can escape and cause malfunctions.

To fix this issue, the gas rings should be inspected regularly and replaced as needed.

Overall, proper maintenance and cleaning of the gas block and gas tube are crucial for the reliable functioning of your Savage MSR 10 Hunter.

7. Jamming Problems

Have you been experiencing jamming problems while firing your rifle?

If your answer is yes, then worry not because you are not alone in this.

Jamming can be a frustrating problem that can ruin your shooting experience and potentially cause safety hazards.

The main cause of jamming in the Savage MSR 10 Hunter rifle is related to the type and quality of the ammunition being used.

Using subpar ammunition can cause misfires, feeding issues, and failures to eject, which can result in a jammed rifle.

Additionally, using ammunition that is not compatible with your rifle’s receiver or barrel can cause excessive pressure or failure to cycle, causing your rifle to malfunction.

To fix this issue, we recommend that you use high-quality ammunition that is specifically designed for your rifle.

You can consult the owner’s manual to determine the type and caliber of ammunition recommended for your Savage MSR 10 Hunter rifle.

Furthermore, ensure that the ammunition is stored properly and has not been damaged or exposed to extreme temperatures or humidity.

Another cause of jamming in the Savage MSR 10 Hunter rifle is related to poor maintenance.

Failing to clean and lubricate your rifle after every use can cause a build-up of debris, dirt, and fouling, which can lead to feeding, cycling, and extraction problems.

Additionally, using worn-out or damaged parts can cause your rifle to malfunction and jam.

To avoid these issues, we recommend that you clean and lubricate your rifle after every use, using appropriate cleaning and lubricating materials.

You should also inspect your rifle’s parts regularly, and replace any worn-out or damaged parts immediately to avoid malfunctions.

8. Recoil Spring Problems

One of the main causes of recoil spring problems is worn-out or damaged springs. Over time, the spring can become weak, leading to malfunctions or failures of the firearm.

Excessive use, improper maintenance, or exposure to extreme temperatures can contribute to the wear and tear of the recoil spring.

To fix this issue, you will need to replace the recoil spring.

First, ensure that the firearm is unloaded and that all ammunition is removed.

Then, disassemble the firearm and locate the recoil spring.

Carefully remove the old spring and replace it with a new one of the same size and specifications.

Make sure the new spring is properly installed and secured in place.

Finally, reassemble the firearm and conduct a function check to ensure the recoil spring is working properly.

Another cause of recoil spring problems is improper installation or assembly.

If the recoil spring is not installed correctly, it can cause feeding problems, extraction issues, or even damage to the firearm.

To avoid this problem, refer to the firearm manual or seek guidance from a professional gunsmith.

9. Accuracy Issues

Many hunters and shooters face this problem with their firearms. There are several reasons why a rifle may have accuracy issues, and it’s crucial to identify the root cause to fix the problem. I

One of the primary reasons for accuracy issues is a poorly bedded stock.

When the stock is not appropriately attached to the action, it can shift or move during recoil, affecting accuracy.

The solution to this is to bed the stock. Bedding the stock involves filling the gaps between the stock and the action with a bedding compound.

This will provide a solid and stable platform for the rifle, reducing the chances of movement during recoil.

Another common cause of accuracy issues is a dirty barrel or poor cleaning practices.

A dirty barrel can affect the bullet’s flight by altering its trajectory, resulting in poor accuracy.

To solve this issue, clean your rifle thoroughly after each use.

Use a good bore cleaner and a cleaning rod to ensure that the barrel is completely free of dirt and debris.

Additionally, over-torqued scope rings or a misaligned scope can also cause accuracy issues.

If the scope is not aligned correctly, the bullet will not hit the target where you aim, resulting in poor accuracy.

To fix this problem, it’s crucial to ensure that the scope rings are tightened correctly and that the scope is properly aligned.

What Is The Difference Between Savage 10 and 110?

The main difference between the Savage 10 and 110 is that the 10 is a short-action rifle, while the 110 is a long-action rifle.

This means that the 10 is designed for shorter cartridges, such as the .308 Winchester, while the 110 is designed for longer cartridges, such as the .30-06 Springfield.

Another difference between the two models is that the Savage 10 has a fixed magazine, while the 110 has a detachable box magazine.

The 110 also has a larger ejection port and a longer barrel, making it better suited for long-range shooting.

In terms of accuracy and reliability, both the Savage 10 and 110 are known for their outstanding performance and are popular choices among hunters and shooters.

Ultimately, the choice between these two models comes down to personal preference and the specific needs of the user.

Frequently Asked Questions

Who makes Savage MSR 10?

Savage Arms makes the Savage MSR 10.

What is the effective range of a Savage MSR 10?

The effective range of a Savage MSR 10 depends on factors such as the cartridge, barrel length, and the shooter’s skill level. However, in general, the rifle has an effective range of up to 600 yards or more.

What is the twist rate on a Savage MSR 10 Hunter?

The twist rate on a Savage MSR 10 Hunter depends on the specific chambering, but it is typically 1:8 or 1:10.

Is the Savage MSR 10 mil spec?

The Savage MSR 10 is not officially mil-spec, as it is not built to meet all of the specific requirements set by the military.

How much does a savage msr10 Hunter weigh?

around 8-9 pounds

Conclusion

After exploring the most common problems hunters encounter with their Savage MSR 10, it is clear that there are several solutions to these issues.

However, is there a bigger picture here?

As hunters, we have a responsibility to not only enjoy our sport but also to ensure that we are using the most ethical and humane methods possible.

The problems that arise with the Savage MSR 10 are not unique to this particular rifle but rather are indicative of a larger issue in the hunting community – the constant desire for bigger and better equipment.

While upgrading equipment can certainly improve our chances of success in the field, it is important to remember that it is not the equipment alone that makes us successful hunters.

Our skills, knowledge, and instincts are just as crucial – if not more so – in ensuring that we are taking ethical shots and making clean kills.

So, while we may be tempted to upgrade to a newer, more high-tech rifle, let us not forget the importance of honing our skills and perfecting our craft.

As hunters, we have a unique opportunity to connect with nature and to protect our wildlife resources for future generations. Let us do so with the utmost respect, humility, and responsibility.