Smith And Wesson 460 XVR Problems And Their Solutions

The Smith and Wesson 460 XVR is a powerful and reliable firearm. It is popular with hunters, target shooters and gun collectors alike. However, some people experience problems when using the 460 XVR.

This article will look at some of the common issues that can arise with the 460 XVR and how to troubleshoot them to ensure it continues to work reliably.

Some of the most common problems with S&W 460 XVR include Mag problems, Trigger Jamming Issues, Failure To Extract, Bullet Case Stuck Inside the Cylinder, Cylinder Doesn’t Rotate, Scope Mounting Problems, Accuracy Issues, Cleaning Issues Overheating Issues.

Smith And Wesson 460 XVR Problems

We will also discuss some preventative measures that can be taken to avoid future problems with the Smith and Wesson 460 XVR.

Quick Overview of Smith And Wesson 460 XVR Specs

Specification Details
Caliber .460 S&W Magnum
Capacity 5 rounds
Barrel Length 8.375 inches
Weight 75.9 ounces
Frame Material Stainless Steel
Grip Material Rubber with Finger Grooves
Action Single/Double Action
Trigger Pull ~12 lbs (Single), ~5 lbs (Double)
Safety Internal Locking System, Transfer Bar

Common Smith And Wesson 460 XVR Problems And Their Solutions

1. Mag problems

Many users have reported instances when their magazines won’t feed rounds into the chamber, jamming up the gun.

The Main Reason:

A design flaw in certain revolver models causes this issue. The shells in the magazine won’t feed into the chamber because of a misalignment between the cylinder and the magazine itself.

Fixing It:

Fortunately, a unique and simple way to address this issue exists. Use a small but mighty toothpick to move the cartridges around within the magazine so that they fit into position properly.

Once you do this, your revolver should be able to load correctly and without any further issues.

To prevent this issue from occurring in the first place, ensure that the cartridges are loaded correctly within the magazine.

This will help ensure they stay in their correct position so the misalignment does not occur.

 Furthermore, you can also clean and maintain your gun regularly to help reduce any jamming issues.

2. Trigger Jamming Issue

This issue occurs when firing the firearm, making it difficult to pull back the trigger for each successive shot.

The main reason this problem arises is due to dirt or debris entering into the internal mechanisms of the gun.

To fix this issue, users should disassemble their guns and clean out any accumulated dirt and debris in the trigger assembly.

After reassembling the firearm, users should use a small oil droplet to lubricate any moving parts before firing it again.

3. Failure To Extract

This issue typically occurs when the firearm fails to eject an empty shell casing from the chamber after being fired, leaving the shooter with an unusable gun until manually cleared.

A lack of lubrication or misaligned parts within the gun usually causes the main reason behind this failure to extract.

This can lead to poor cycling, which can cause the bolt to become stuck inside the chamber and unable to be ejected properly.

The good news is that this issue isn’t overly difficult to fix, as long as you take the necessary steps.

The first step is to thoroughly clean and lubricate your gun, which can help alleviate any dirt and debris that may be causing the problem.

If you notice any parts of the gun that appear misaligned or damaged, they should be replaced with genuine Smith and Wesson parts for optimal performance.

If after all of these steps are taken the issue still persists, it may be a good idea to take your gun into a certified Smith and Wesson technician for further inspection.

4. The Bullet Case Stuck

One common issue is when the bullet casing gets stuck inside the cylinder. This problem occurs when a spent cartridge case fails to eject properly and becomes lodged in between the cylinder and frame.

The cause of this issue can range from a dirty gun, worn out parts, or incorrect ammunition being used in the revolver.

Fortunately, there is an easy fix for this problem. First, remove the entire cylinder by removing both side plates of the revolver; some models require you to press down on a button at the rear of the cylinder, while others require a pin to be removed.

Next, tap the case gently with a rubber mallet or a wooden block until it becomes loose enough to be easily removed from the frame.

Once the casing is removed, inspect all the parts for any dirt or debris and ensure they’re clean before reassembling the revolver.

Ensuring the correct ammunition is used in your Smith and Wesson revolver is also important. This will help avoid any similar issues in the future.

5. Cylinder Doesn’t Rotate

Another common problem users experience with this gun is that the cylinder does not rotate.

The main reason for this issue is incorrect alignment between the cylinder and barrel, which means that when the hammer is cocked, the cylinder is not properly aligned and, therefore will not rotate.

To fix this issue you need to check the alignment between the two structures and adjust them accordingly. If needed, try using a few drops of oil on the cylinder’s surface for a smoother operation.

It is also recommended that you get your gun serviced regularly in order to avoid possible problems in the future.

6. Scope Mounting Problem

Scope Mounting Problem is a common issue shooters experience when using this firearm.

The primary cause of this problem is the tightening torque required to secure the scope mount to the rail. If you overtighten, then you can strip out threads in your firearm.

On the other hand, if you don’t provide enough torque, then the scope mount can become loose over time.

Use a quality torque wrench when mounting your scope to avoid this issue. Additionally, try applying small shots of thread locker on the screws for added security.

This will ensure that any shocks or vibrations experienced while shooting doesn’t cause your scope mounts to come loose.

If you are ever uncertain how much torque to apply, consult the manufacturer’s instructions.

7. Trigger Jamming Issue

Besides the other common problems associated with 460 XVR, trigger jamming is one of the most commonly encountered issues.

This occurs when the trigger binding fails to reset properly after each shot, making it difficult to fire again.

The most common cause of this issue is a dirty trigger group. If dirt and debris have built up in the trigger mechanism, it can reduce the force necessary for trigger reset and leave the gun unable to fire again until cleared.

Fortunately, there are several solutions you can try to fix this problem. Start by thoroughly disassembling your 460 XVR and cleaning the trigger group with a quality gun cleaner and a soft cloth. This will help remove any dirt or debris interfering with the trigger resetting.

8. Accuracy Issue

The main reason for this issue is usually due to the gun’s barrel not being properly aligned or some obstruction in the barrel itself. To fix this issue, a few simple steps can be taken.

First, ensure your barrel is clean and free of any obstructions. Second, check for misalignment and ensure the barrel is properly aligned when making shots.

Finally, make sure to use a range-worthy ammunition (ammo specifically designed for shooting ranges) to get the most accuracy out of your Smith and Wesson 460 XVR firearm.

Another unique way to improve accuracy with the Smith and Wesson 460 XVR is by using a stabilizer or muzzle brake.

A stabilizer or muzzle brake attaches to the end of your barrel and helps reduce recoil as well as helps keep your barrel aligned, allowing you to make more accurate shots.

This can be particularly helpful for long-range shooting, where accuracy is key.

It’s important to practice proper trigger control when using the Smith and Wesson 460 XVR to ensure the most accuracy out of your shots.

Trigger control involves gently squeezing the trigger rather than jerking or pulling it. This allows you to maintain a steady sight picture and fire accurately.

9. Cleaning Issues

The main reason is that the compensator can become dirty after firing around 200 shots.

This happens because it accumulates residue from the gunpowder, which affects the handgun’s accuracy and performance.

To ensure maximum performance and accuracy, it is essential to clean the compensator regularly.

One unique way to clean the Smith & Wesson 460 XVR is to use compressed air in combination with a good quality cleaning solvent and cleaning kit.

Use the compressed air to blow off any excess powder residue from the compensator.

Then, use a good quality gun-cleaning solvent From Amazon and a brush kit to carefully scrub out any remaining debris. Follow up with a good-quality lubricant, and you’re all set.

10. Overheating Issue

The main cause of this problem is simply due to extended use over a long period, which can lead to it becoming clogged with lubricant or other obstructions in the barrel.

 To combat this problem, we recommend cleaning your firearm regularly and after every extended shooting session.

If you properly care for your 460 XVR, it should not overheat.

If the problem persists, a unique solution is to use a cooling lubricant spray on the barrel and chamber, which can help keep temperatures down.

This lubricant helps reduce heat buildup by keeping the barrel and chamber cool for extended periods.

3 Best Alternative Guns of Smith and Wesson 460 XVR

The Smith and Wesson 460 XVR is a powerful and reliable firearm, designed to provide unparalleled performance in hunting and other outdoor activities.

However, for those who seek alternative options, we provide you with three best alternative guns of Smith and Wesson 460 XVR.

Smith and Wesson 500 Magnum

First on our list is the Smith and Wesson 500 Magnum Revolver. This ultra-strong and powerful firearm boasts of its capability to shoot down a range of game effortlessly.

With a caliber of .500, it can effortlessly take down anything from deer to grizzly bears. The revolver also features a muzzle energy of 2,600 ft-lbs, providing unmatched stopping power that puts any game down in a single shot.

Smith and Wesson Performance Center Model 629 Hunter

Second on the list is the Smith and Wesson Performance Center Model 629 Hunter Revolver. As its name suggests, this firearm is designed for the avid hunter seeking the best in performance and design.

It uses a .44 Magnum caliber, making it suitable for taking down big game like black bears and larger game animals.

The 8 3/8-inch barrel with a muzzle-ejecting compensator ensures better accuracy and reduced recoil, making it an excellent choice for outdoor hunting and shooting activities.

Smith and Wesson Model 69 Combat Magnum

Last but not least is the Smith and Wesson Model 69 Combat Magnum Revolver, a versatile and reliable firearm designed for protection and self-defense. With a .44 Magnum caliber, this revolver provides enough stopping power to neutralize any threat that comes your way.

Its compact design and ergonomic grip offer exceptional accuracy and a solid shooting experience.

Frequently Asked Questions

Can I use .45 Colt ammunition in the Smith And Wesson 460 XVR?

It is important to note that the .45 Colt rounds will be significantly less powerful in the 460 XVR than the .460 S&W Magnum rounds.

Are there any known problems with the Taurus Raging Bull compared to the 460 XVR?

A: While the Taurus Raging Bull is a reliable handgun, it has a few drawbacks. The Taurus may have a less refined trigger, a shorter barrel length, and a slightly different grip design.

How can I fix a cylinder stuck on the 460 XVR?

Ensuring the firearm is unloaded is important if you are experiencing a stuck cylinder. You can then try cleaning the cylinder, removing any carbon build-up or debris that may be causing the issue.

Is the Smith And Wesson 460 XVR suitable for self-defense?

While the Smith And Wesson 460 XVR can certainly be used for self-defense, it is worth considering that the handgun’s large size, weight, and powerful recoil may make it less suitable for some individuals, especially those who are not experienced shooters.

Is the Smith And Wesson 460 XVR recoil as bad as some people claim?

The recoil can be quite potent due to the powerful .460 S&W Magnum ammunition it chambers. However, many shooters find the recoil manageable with proper grip and technique.


If you want a hunting revolver you can depend on, look no further than the Smith & Wesson 460 XVR. Despite a few minor issues, it’s an outstanding option for shooters of all levels.

By following my recommendations closely, you can be confident in addressing any issues related to your weapon 460 XVR.

Related Posts:

Smith And Wesson Governor Problems

Smith and Wesson CSX Problems

Smith And Wesson SD9VE Problems

Smith and Wesson 22a Problems

Glock 19x Problems

Ruger LCR 38 Special Problems

Canik Tp9 Elite SC Problems