The Smith And Wesson SD9VE is a semi-automatic pistol that offers many advantages to users. It has an ergonomic design, offering superior control and accuracy.

However, like any firearm, the SD9VE can experience problems that need to be addressed in order to keep it running smoothly.

In this article we will discuss some of the most common issues with the Smith And Wesson SD9VE and their solutions.

Some of the most common problems that shooters experience with Smith and Wesson Sd9ve are Feeding Problems, Slide Failing to Lock Back, striker Wear, Failure To Eject, Difficult to Pull the Slide, Trigger Reset Issues, Accuracy Issues, and Stovepiping.

We’ll also look at ways to prevent some of these issues from occurring in the first place. Finally, we will provide tips for maintaining your SD9VE in order to keep it running like new.

Common Smith And Wesson SD9VE Problems And Their Solutions

Contents

0.1 Common Smith And Wesson SD9VE Problems And Their Solutions
0.2 What Do The User Think About Smith & Wesson SD9VE

1 3 Alternatives to the Smith and Wesson SD9VE

1. Feeding Problem

The Smith and Wesson SD9VE represents one of the most reliable handguns on the market. Despite its reliability, some users have reported a “feeding problem” when ammunition fails to load properly into the chamber.

Several factors, such as improper loading technique or incompatible ammo, can cause this issue. Fortunately, there are several steps you can take to try and solve the feeding problem.

The first step is to inspect the magazine and ensure that it’s been correctly loaded. The SD9VE must be loaded using an “up-and-down” motion, with each cartridge being pushed into the magazine firmly and securely.

If your magazines are not properly loaded, the ammunition may fail to feed properly as a result.

Additionally, it’s important to ensure you’re using compatible ammo. The SD9VE is designed to work with ammunition that is either 9mm or .357 caliber in diameter.

Using any other type of ammunition may cause feeding problems due to the reduced fit between the cartridge and the magazine.

Finally, inspecting the firearm for signs of damage or wear would be best. If the gun is damaged, it may cause issues with feeding that can be difficult to diagnose.

If you suspect your firearm is damaged in any way, take it to an experienced gunsmith for a thorough inspection and repair before continuing to use it.

2. Slide Failing to Lock Back

If your Smith & Wesson SD9VE’s slide fails to lock back every time you reload, this could be due to a worn-out magazine catch spring.

If the spring is loose or has lost tension, it won’t be able to hold the slide back when you reload effectively. Thankfully, replacing the magazine catch spring is an easy and relatively inexpensive job.

You can purchase a replacement magazine catch spring from any local gun shop or online store, such as Brownells.

Once you have the new spring, all you need to do is to remove the old one using a standard screwdriver and replace it with the new one. Just make sure that the new spring has the same length and tension as the old one.

Another option exists if you don’t want to replace the magazine catch spring. You can adjust the existing spring slightly by using a pair of needle-nose pliers to increase the tension. This should be enough for it to hold back the slide when reloading properly.

3. Striker Wear

Wear and tear on the striker of your SD9VE is one of the most common problems that can cause malfunctioning or misfiring. The “striker” is a component inside the pistol that sets off a primer when it strikes it.

Over time, this part may become worn down due to repeated use, resulting in a misfired shot or a “light primer strike”.

If your Smith & Wesson SD9VE is experiencing regular misfires, inspecting the striker for wear and tear is important.

To do this, you can remove the slide from the frame and check for any uneven or protruding edges on the striker surface.

If necessary, you may need to replace the striker in order to get your firearm back up and running smoothly again.

In addition, if you notice any corrosion or rust on the striker surface, it’s important to address this issue as soon as possible.

Corrosion can cause damage to the firing pin resulting in misfires and other malfunctions. To prevent further wear and tear, you can lubricate the striker and ensure it is well-maintained properly.

4. Failure To Eject

If you are having issues with the Wesson SD9VE failing to eject a spent casing properly, then there may be several causes. First and foremost is the condition of your weapon.

Poorly maintained or defective firearms can cause consistent issues with proper functioning. You should take your firearm in for service if it has been abused or not cared for properly.

Another cause for failure to eject a spent casing could be the location of the extractor. If the extractor is not properly seated in its channel, or not aligned correctly, it can cause issues with proper extraction and ejection.

If this is the case, you should take your firearm in to an experienced gunsmith who can adjust and/or replace the extractor as necessary.

Lastly, the type of ammunition used could be a factor in the failure to eject for the Smith And Wesson SD9VE. Sticking with factory-manufactured ammunition is the best course of action.

Certain types of ammunition may not feed or function properly in your firearm, so it’s important to stay within recommended parameters when selecting a round.

5. Difficult to Pull the Slide

If you’re experiencing difficulty in pulling the slide of your Smith & Wesson SD9VE pistol, don’t worry – it’s a common issue that can be easily addressed.

First and foremost, make sure that you are using the right grip technique for this type of weapon.

It is important to use a firm, two-handed grip when attempting to pull the slide, and ensure that your thumbs are not hindering the process by being placed too close to the slide.

If you continue to experience difficulty after adjusting your grip technique, it may be time to clean the slide lock thoroughly.

The accumulation of dirt or debris on the slide lock can cause unnecessary friction and lead to difficulty in pulling the slide. In order to clean the slide lock, you must first remove it from the pistol.

Once removed, use a brush to gently scrub away any dirt or debris that may have accumulated on its surface.

If these steps fail to resolve the issue, then you may need to disassemble and lubricate your Smith & Wesson SD9VE in order to get it back into proper working order.

Again, use only a light lubricant during this process and apply it sparingly. Once done, reassemble the pistol and attempt to pull the slide again – if successful, your SD9VE should now be back up and running as normal.

6. Trigger Reset Issue

The Trigger Reset Issue is one of the most common issues with Smith and Wesson SD9VE pistols. This issue occurs when the trigger does not reset after firing a round, causing the user to cycle the slide in order to shoot again manually.

Although this may seem inconvenient, it can be very dangerous as you cannot tell if the gun is about to fire when you pull the trigger.

Fortunately, this issue can usually be resolved with a few simple steps. First, ensure your pistol’s Trigger Return Spring (TRS) and Sear Spring are properly adjusted.

If either of these springs are out of alignment or too weak, it could cause the trigger not to reset correctly.

Next, make sure that the Trigger Bar is properly connected to the Frame and Slide Stop Lever.

This connection ensures that when you move your finger off the trigger, the gun’s firing system will automatically reset itself.

Finally, if all else fails, try cleaning and lubricating your pistol. Dirt and debris can build up inside the pistol over time, causing it to malfunction. Cleaning and lubricating your pistol regularly will help keep it in top condition.

7. Accuracy Issue

If you are experiencing accuracy issues with your Smith & Wesson SD9VE, it is important to understand the root cause and possible solutions.

Factors such as grip technique, trigger control, sight alignment, recoil management, and ammo selection can affect accuracy.

Grip technique is one of the most important aspects of shooting accurately – if your dominant hand is not firmly gripping the gun, it will affect your accuracy. Make sure you are using a solid and stable grip with both hands on the gun.

Trigger control is also critical to improving accuracy – when pulling the trigger, keep steady pressure while focusing on maintaining sight alignment. This allows for more consistent follow-through which results in greater accuracy.

Sight alignment is also critical as it helps you to keep the sights on target range while squeezing the trigger.

Ensure your eyes align with the gun’s front and rear sight, and keep them aligned throughout the entire shot.

Recoil management is a key factor when shooting accurately. The more control you have over the recoil of your gun, the more accurate you will be. This can be achieved through proper grip technique and body position.

Finally, ammo selection is an important factor when trying to improve accuracy. Make sure you are using quality ammunition with consistent results – higher quality ammunition ensures greater accuracy and consistency in your shots.

8. Stovepiping

Stovepiping is one of the common issues with Smith and Wesson SD9VE pistols. It occurs when, after firing a round from the pistol, the spent casing fails to properly eject out of the barrel, instead sticking halfway in and out.

As stovepiping can lead to jamming or other problems, gun owners must be aware of the issue, and take steps to prevent it.

There are several potential causes of stovepiping in Smith & Wesson SD9VE pistols. Improper lubrication can cause the slide to stick during cycling, leading to a failure to eject spent casings.

Additionally, faulty magazines or weak extraction spring can increase the chance of stovepiping happening as well.

Fortunately, gun owners can take some simple preventive measures to reduce the risk of stovepiping in their Smith & Wesson SD9VE.

Lubrication is key – proper lubrication will allow the slide to cycle properly and eject spent casings efficiently.

Additionally, ensuring that magazines are correctly inserted into the weapon and using higher-tension aftermarket springs can help reduce the risk of stovepiping.

It’s important to note that, while these steps can help reduce stovepiping in Smith & Wesson SD9VE pistols, they will not eliminate it completely.

If stovepiping persists after taking these steps, it may be time to consider taking your pistol to a professional gunsmith for servicing.

What Do The User Think About Smith & Wesson SD9VE

The Smith & Wesson SD9VE is a popular handgun in the United States. It has been praised by many for its reliability, accuracy, and ease of use. However, it also has some criticisms from users who think it is not durable enough or its trigger pull is too heavy.

In general, the reviews of this handgun are mixed. Some people love it and some do not. Those who like it appreciate its accuracy, affordability, and lightweight frame. On the other hand, those who don’t like it think that the trigger pull is too hard to manage or that the gun breaks down too easily.

Overall, the Smith & Wesson SD9VE is a great handgun for those looking for an affordable and reliable option. Its accuracy, lightweight frame, and affordability make it a great choice for home defense or personal protection purposes.

However, those who prefer stronger triggers may want to look elsewhere. The reviews are mixed regarding this handgun, so users should try it out before making a purchase decision.

3 Alternatives to the Smith and Wesson SD9VE

The Smith and Wesson SD9VE is a reliable, easy-to-operate handgun with an excellent price point. But what if you’re looking for something different? Here are three alternatives that can provide unique features and advantages over the S&W SD9VE.

RIA MAPP 9MM

The Rock Island Armory (RIA) MAPP 9MM is a great choice for those seeking an affordable alternative. It has a low-recoil design that makes it ideal for new shooters, and its high capacity magazine allows you to carry more rounds without reloading often. The gun’s ergonomic grip also ensures a comfortable shooting experience.

Beretta PX4

The Beretta PX4 is a full-size pistol that provides superior accuracy and reliability. It comes with ambidextrous safety, making it suitable for both left-handed and right-handed shooters. It’s also corrosion-resistant and has a low bore axis which helps reduce muzzle rise and makes for easy follow-up shots.

Glock G19

The Glock G19 is a top choice among law enforcement and military personnel due to its superior durability and reliability.

It houses a lightweight polymer frame that makes it ideal for concealed carry, while its high-capacity magazine allows you to keep more rounds on hand.

The Glock G19 also features an adjustable backstrap, allowing you to customize the grip for a comfortable fit.

Frequently Asked Questions

What are some common problems with the Smith And Wesson SD9VE?

Some common problems with the Smith And Wesson SD9VE include magazine issues and failure to feed or eject properly.

How can I fix magazine problems with my SD9VE?

If you are experiencing magazine problems with your SD9VE, try disassembling and cleaning the magazine. Ensure that the magazine spring is free of dirt or debris. If the problem persists, consider purchasing a new magazine.

What should I do if my SD9VE is failing to feed or eject properly?

If your SD9VE is failing to feed or eject properly, first make sure that you are using quality ammunition that is within the recommended specifications for your firearm.

Clean the barrel and chamber thoroughly to remove any obstructions or debris. If the problem persists, consult a qualified gunsmith for further assistance.

Can I use Glock magazines in my SD9VE?

No, the SD9VE is not designed to use Glock magazines. It is recommended to use only Smith And Wesson SD9VE magazines for optimal performance and reliability.

What is the capacity of the SD9VE magazine?

The SD9VE magazine has a capacity of 16 rounds.

Can I buy higher-capacity magazines for my SD9VE?

A: No, the SD9VE has a fixed magazine capacity of 16 rounds and there are no higher-capacity magazines available for this model.

How can I fix a brass-related issue with my SD9VE?

If you are experiencing an issue with brass getting stuck or not ejecting properly in your SD9VE, ensure that your firearm is clean and properly lubricated. Using high-quality ammunition can also help prevent this issue.