Taurus 709 Slim Problems and Their Solutions

Are you a Taurus 709 Slim owner? Has your trusty compact handgun been giving you some issues? Don’t worry, you’re not alone.

The Taurus 709 Slim is a popular compact handgun that many gun enthusiasts rely on for personal defense. However, like any other firearm, it’s not immune to problems.

Our goal is to give you the confidence you need to trust your Taurus 709 Slim when it matters most. So, read on to learn about the most common issues and how to solve them.

Common Taurus 709 Slim Problems and Their Solutions

1. Failure To Eject

One of the primary reasons for this common issue is the use of ammunition with an incorrect overall length. When the ammunition has too much space behind its head, it fails to seat itself properly in the chamber of the barrel, resulting in an inability to eject as a result.

Furthermore, failure to properly lubricate the gun or insufficient maintenance can also lead to a Failure to Eject problem.

To fix Failure to Eject on a Taurus 709 Slim gun, first check that your ammunition has an appropriate overall length. If necessary, replace any rounds that do not meet the specifications with one that does.

After ensuring you are using appropriate ammunition, thoroughly clean and lubricate your gun according to manufacturer instructions.

Make sure you clean all areas of the firearm including the chamber, muzzle, and slide assembly. In addition, inspect any components such as recoil springs or firing pin safety systems for signs of wear and tear; these should be replaced if needed.

Once all components have been inspected and/or replaced as necessary, fire several test rounds at a shooting range or other safe environment; if there is still a Failure to Eject issue after this step then further servicing may be required by a qualified gunsmith.

2. Failure To Fire

This is a serious and potentially dangerous problem, one that must be addressed as quickly as possible. In order to properly fix this issue, it is important to understand the various causes and then take the necessary steps to correct them.

Here are some of the most common causes of Failure

To Fire in a Taurus 709 Slim Gun and how to address them:

1. Dirty or Blocked Barrel:

If the barrel of your gun is dirty or blocked with debris, it can hinder the firearm from firing properly.

To fix this issue, you should ensure your barrel is clean by using gun cleaning supplies such as specialized cleaning rods and brushes. You can also use solvents and lubricants to further assist in clearing out any blockages.

2. Faulty Ammunition:

Defective bullets or poor quality ammunition can cause Failure To Fire in a Taurus 709 Slim Gun.

Before using any type of ammunition, always check for defects or imperfections on the bullets themselves and make sure they are within safety limits before loading into the chamber.

Additionally, always use factory new ammunition when possible; remanufactured ammo may have unseen issues that can lead to a failed firing attempt.

3. Improperly Loaded Magazine:

A magazine that has not been loaded correctly can prevent your gun from firing properly due to incorrect alignment or blockage of parts within the firearm itself.

To fix this issue, make sure your magazines are fully loaded with no loose rounds bouncing around within its spring-loaded channels; also double-check each round for proper seating in its designated spot before inserting into the pistol grip frame magazine well.

4. Bad Trigger Group Parts:

Worn trigger group parts may also cause Failure To Fire in a Taurus 709 Slim Gun if they become too loose or misaligned from their intended settings.

To fix this issue, replace any worn trigger group components with genuine factory-spec parts; if you’re unfamiliar with taking apart firearms for cleaning and maintenance purposes, consult a qualified professional who specializes in firearms repair services for assistance instead of attempting DIY repairs yourself.

3. Trigger Problems

One of the most common causes of trigger problems on the Taurus 709 Slim is dirty contacts in the firing pin assembly.

When these become clogged with dirt and debris, they can prevent the firing pin from functioning properly, leading to misfires or other difficulties when attempting to fire.

To fix this issue, start by disassembling the gun according to manufacturer instructions.

Once this is done, use a small brush or cloth with cleaning solvent to clean any visible dirt and debris from around the firing pin assembly.

Additionally, use a cotton swab dipped in solvent to carefully remove any excess debris that may be stuck in between components.

Once everything is clean and dry, reassemble your gun and test-fire it at a safe range location.

Another potential cause of trigger problems could be an issue with either recoil springs or hammer springs being worn out or weakened over time.

To check these springs for proper tension, take off all grips and stocks from your gun so that you can reach them easily.

Pull back on each spring until it has reached its maximum compression level without putting too much pressure onto it – if there’s any slack or resistance felt in either of these springs then they need replacing as soon as possible in order for your gun to function correctly.

You should also check for any cracked or broken parts such as pins that connect moving parts together; replacing damaged parts should quickly resolve any malfunctioning associated with them.

Finally, one last thing you should always check when troubleshooting trigger problems is whether you have enough ammunition available for use – having no ammunition will obviously make it impossible to fire!

Be sure to always keep track of your ammo supply before leaving home so that you don’t find yourself stranded halfway through a shooting session with an empty magazine!

4. Jamming Problems

Jamming is one of the primary issues that can occur when operating a firearm. It is caused by a variety of factors, such as an object in the barrel obstructing a bullet, improper ammo or magazine loading, or even a broken component in the firing mechanism.

If your Taurus 709 Slim gun experiences jamming, there are several steps you can take to try to fix it.

First, double-check that you are using the correct ammunition for your specific gun. Ensure that all cartridges are correctly loaded; if you are using a magazine, make sure it is properly seated and locked into place.

Also, inspect any ammunition you’re using for signs of damage or wear. Make sure all ammunition is clean and free from dirt, dust, and oil before loading into the chamber.

Next, inspect your gun for any obvious mechanical faults.

Check for broken springs or other components that may be blocking the firing pin from engaging with the round. Inspect any moving parts like slides and hammers to ensure they have not become jammed due to debris buildup or corrosion.

If possible remove and clean these components separately from the main body of your firearm before reassembly.

Finally, check if there is an obstruction within your barrel or chamber by performing a visual inspection down its length with either your eyesight or a cleaning rod inserted into it.

If there does appear to be an obstruction present then use appropriate cleaning methodologies to remove it such as cleaning cloths, brushes, rods, and solvents designed specifically for firearms maintenance.

5. Extractor Issue

An extractor issue occurs when the extractor fails to properly remove a spent shell casing from the chamber after firing a round. This can cause jams and other damage to the firearm if not addressed properly.

The most likely cause of an extractor issue is a malfunctioning or worn-out ejector spring. The spring provides tension to the extractor which in turn helps it function correctly.

Other possible causes include improper head spacing, weak ammunition, and faulty magazines.

Fortunately, addressing an extractor issue on the Taurus 709 Slim gun is relatively simple and straightforward.

Before attempting any repair work make sure that your firearm is unloaded and any ammo has been removed from the vicinity to avoid accidents or injury.

It’s also important to take note of any safety precautions outlined by your firearms manufacturer before you begin working on your gun.

The first step in repairing an extractor issue with a Taurus 709 Slim gun is to inspect the spring that powers it for signs of wear or damage.

If you find any issues then replace it with a new one from your local firearms retailer.

Be sure to double check that all components fit together properly before reassembling your firearm and testing its functionality with dummy rounds (no live ammunition).

If replacing the spring does not solve your extractor issue then you should consider checking for any headspacing problems or weak ammunition being used in conjunction with your firearm as these can often be overlooked when troubleshooting such issues but have very real consequences if they go unaddressed.

Finally, make sure that all moving parts are clean and well lubricated to ensure the smooth functioning of the firearm going forward.

6. Misfire Problems 

Misfiring is an issue that can have a variety of causes, ranging from issues with ammunition to internal problems in the gun itself.

In order to properly diagnose and fix the problem, it’s important to understand what the potential misfire causes are, as well as how to troubleshoot and repair them.

The most common cause of misfiring in this model of gun is ammunition-related issues. Primer ignition failure is one of the easiest ways for ammunition to lead to a misfire.

This happens when there is not enough energy produced by striking the primer cap in order to ignite the powder charge inside of the cartridge.

This can happen due to a faulty primer or due to weak striking power from either a worn-out firing pin or defective spring that may be housed within your firearm’s hammer assembly.

It is also possible for ammunition-related issues such as incorrect bullet seating depth, differences between cartridge chamber lengths, and overall sizing variations between different brands of ammunition or even individual rounds within one brand, all of which can cause misfires too.

In addition to ammunition-related problems, other potential misfire causes for this gun include improper lubrication or fouling buildup on certain surfaces like firing pins, extractors, bolt faces, or any other moving parts.

Gun owners should check their firearms regularly for any build-up or accumulation of residue from dirty ammo as this can affect how cleanly rounds fire off and can lead to more frequent misfires over time.

Improperly adjusted gas systems also need careful attention since they have a major impact on how reliably rounds easily cycle through your firearm.

If they’re set too low then you could experience short-stroking which would lead to failures in complete ejection and further complicate extraction while too much pressure leads to excessive recoil and stress on various pieces which could lead to an increase in malfunctions such as premature lock backs, double feeds and even stovepiping at times too.

To help minimize misfires caused by faulty primers or weak ammo performance, it’s important that owners use quality ammunition that has been properly maintained over time – meaning it should be stored away from extreme temperatures or moisture levels – and only load cartridges into magazines that have no signs of damage like dents along their bodies which could diminish their strength fatigue them down prematurely leading them towards potential failure eventually over time .

Gas systems should be inspected regularly for proper alignment so that they operate correctly throughout each cycle without fail; this will ensure accuracy when shooting as well as better reliability overall during operations when loaded under heavy-duty scenarios like competitions where extra rounds are sent flying down range quickly yet with utmost safety at all times!

7. Broken/Inaccurate Rear Sights

Common causes of faulty rear sights include regular wear and tear, improper installation, improper maintenance, or accidental damage.

In some cases, the use of poor-quality parts can also cause faulty rear sights. Fortunately, this is an issue that can easily be resolved with the right knowledge and tools.

To begin, it’s important to assess the exact problem. If the sight is completely bent or broken off, then it must be replaced and properly reinstalled.

On the other hand, if the sight is simply misaligned then it may only require minor adjustments. It’s also important to note that this should always be done by someone who is skilled in gunsmithing – trying to fix it yourself without relevant experience could cause further problems down the line.

If you’re looking to make repairs yourself, you’ll need several specific tools including a small drill bit set and adjustable vice grips.

When ready to begin work, it’s important to ensure that your Taurus 709 Slim gun is unloaded at all times for safety reasons.

Once unloaded, start by placing the pistol firmly in an adjustable vice grip so that it cannot move while being worked on. If necessary due to wear and tear or damage from misuse, use your small drill bit set to remove any screws currently attached to the rear sight if they are no longer useful.

Once complete, carefully slide in your new rear sight ensuring that it fits correctly and securely into place – if not done correctly it won’t line up properly when shooting later on.

With your new rear sight in place use a wrench to secure any associated screws needed for installation; once finished give them one final tight turn but don’t over tighten as this could cause further damage later on.

Finally check that your replacement sight aligns with the front sights before finishing.

If not you may have installed it incorrectly or have purchased an incompatible replacement part that would need replacing again before use for shooting range practice or hunting excursions.

8. Magazine Problems

What causes magazine problems in the Taurus 709 Slim gun and how can they be fixed? Magazine problems are a common issue with firearms and can cause a variety of issues, from jams to failure to feed rounds.

The most common causes of magazine-related malfunctions are faulty magazines, incorrect loading techniques, dirt, damaged magazine components, and incorrect ammunition for the gun.

The first step in fixing these issues is to make sure that the right kind of magazine is being used. Magazines are specifically designed for certain types of guns, so it’s important to make sure that the correct magazine is used with the Taurus 709 Slim.

Additionally, make sure that the magazine is functional and isn’t worn or damaged in any way. If necessary, replace the magazine with a new one.

Next, inspect the ammunition being used with the gun. Ensure that all rounds are properly sized for the gun and that there isn’t any dirt or debris on them as this can cause malfunctions.

Also, check that no rounds have been deformed during loading which will prevent them from feeding correctly into the chamber.

Finally, inspect all of the components inside the gun. Check for broken parts or debris lodged inside which may cause issues related to feeding rounds into the chamber.

Clean any dirt buildup from around these components as well to reduce instances of jamming due to dirt obstructing movement of parts within the firearm’s mechanism.

Frequently Asked Questions

What year was the Taurus 709 Slim made?

The Taurus 709 Slim was introduced in 2010

Is the Taurus 709 slim double action?

Yes, the Taurus 709 Slim has a double-action trigger

What magazines will fit a Taurus 709 Slim?

7-round magazine. it is important to note that the Taurus 709 Slim has been discontinued, so finding compatible magazines may become more difficult over time

How much does a Taurus 709 slim weigh?

The Taurus PT709 Slim weighs 19 ounces