Taurus PT1911 Problems And Their Solutions
If you’re a Taurus PT1911 owner, chances are you’ve encountered some problems with your firearm. Don’t worry, you’re not alone.
As a fellow Taurus PT1911 owner myself, I’ve also faced my fair share of issues with this gun. But here’s the thing – every problem has a solution. And in this article, I’m going to share with you some of the most common Taurus PT1911 problems and their solutions, based on my own personal experience.
So if you’re struggling with your PT1911, keep reading because I might just have the solution for you. Whether it’s a jamming issue or a malfunction, believe me when I say that these are all fixable problems.
Some of the most common problems with Taurus PT1911 reported by users are Failure To Feed, Failure To Eject, Trigger Issues, Failure To Returning To Battery, Hammer Problem, Jamming Problem, Accuracy Issues and Safety Problems.
Common Taurus PT1911 Problems And Their Solutions
Contents
1. Failure To Feed
After firing just a few rounds, your Taurus PT1911 pistol may experience failure to feed issues where a new cartridge doesn’t properly feed into the chamber. This can be a frustrating problem that interrupts your shooting.
There are a couple things you can try to resolve failure to feed problems. First, thoroughly clean and lubricate your PT1911, especially the feed ramp and chamber areas. Built up grime can cause feeding problems.
Also, try using higher quality or different grain ammunition. Some PT1911s can be finicky about the ammo used. Finally, you may need a gunsmith to polish the feed ramp or replace the magazine springs if cleaning and ammo changes don’t fix the issue.
2. Failure To Eject
If you’re pulling your hair out because your Taurus PT1911 won’t eject spent casings, I feel your frustration. It can be really annoying when the slide back moves, but those casings just seem to hang around.
Here’s a trick that worked for me: grab a microscopic brush, like you’re giving your pistol a mini spa treatment. Get into the nooks and crannies, especially around the ejection port and slide rails. Sometimes, it seems like the smallest speck can cause a big hiccup.
3. Trigger Issues
If you’re noticing some wonky stuff with your Taurus PT1911 trigger, don’t panic – you can sort it out. First off, start by giving the trigger bow region a good cleaning. Gunk and buildup can mess with the smoothness, and you don’t want that. Grab a cleaning kit, get in there, and make sure it’s spick and span.
Now, if things still feel stiff, you might need to tweak the mainspring and sear spring. This is where you get hands-on – adjusting these springs can really make a difference.
You might require a bit of trial and error, so be patient. Once you find that sweet spot, your Taurus PT1911 trigger will feel like butter, making your shooting experience a whole lot better. Happy tweaking!
4. Failure To Returning To Battery
Please note that failure to return to battery is a common issue that some Taurus PT1911 owners may experience. This problem can happen when the slide does not fully close after firing, making it impossible to fire again without manually pulling back the slide.
If you encounter this issue, please start by checking the overall condition of your pistol. Make sure there are no obstructions or debris that may be hindering the proper function of the slide. Additionally, inspect the recoil spring and guide rod for any signs of wear or damage. If necessary, clean and lubricate these components to ensure smooth operation.
In some cases, this problem can be caused by weak ammunition that does not provide enough power to fully cycle the slide. If you have recently switched to a different brand or type of ammunition, try using higher quality ammunition to see if it resolves the issue.
5. Hammer Problem
One common issue is when the hammer gets stuck and doesn’t allow your gun to fire properly. This is usually caused by a build-up of dirt or debris, so make sure to regularly clean your gun and lubricate it properly. If the problem persists, you may need to disassemble the hammer and clean it thoroughly.
Another problem that can occur with the hammer is when it doesn’t cock back completely after firing a shot. This can happen if there is too much friction between the hammer and the frame, so make sure to lubricate those contact points. You may also need to adjust the tension on your mainspring if this problem continues.
6. Jamming Problem
If you’ve experienced jamming with your Taurus PT1911, don’t worry – you’re not alone. Several other gun owners have faced this problem, and there are some simple solutions that you can try.
The main cause of jamming in the Taurus PT1911 is something called “limp-wristing.” This happens when you hold the gun too loosely, causing it to not cycle properly. This can be a frustrating issue, especially if you’re at the range or in a self-defense situation.
The solution to this problem is worth practicing and mastering. You need to have a firm grip on the gun, making sure that your wrist is locked in place. This will allow the gun to cycle properly and prevent any jamming issues.
Another common cause of jamming in the Taurus PT1911 is using cheap or low-quality ammunition. As much as we all love to save money, using subpar ammunition can cause more problems in the long run. It’s essential to invest in high-quality ammo for your gun, as it will increase its reliability and performance.
7. Accuracy Issues
If you’re having trouble hitting the bullseye with your pistol, let me share some tips that could really help. One thing you can do is lower the trigger weight. Adjusting and even modifying the trigger can include making it a bit lighter, almost like finding that sweet spot that feels just right for you.
This change would help you have better control over your shots.
Now, let’s talk about practice – it’s like the secret sauce for accuracy. Spending some quality time at the range, including running about 300 rounds through your firearm, would make a significant difference.
This routine helps you get familiar with the gun’s nuances and, over time, would improve your shooting accuracy.
Give it a go, and you’ll likely see a real improvement in hitting your target consistently.
8. Safety Problems
If you’re experiencing issues with the safety on your pistol, the most important thing is to not take any chances and consult a professional right away. Safety problems can make an arm unpredictable and dangerous.
I would not recommend trying to adjust or repair the safety yourself unless you are a trained gunsmith. The intricate internal safety mechanisms require specialized tools and knowledge to repair and replace properly.
Instead, I would help by first carefully unloading and storing the pistol securely to avoid any unintended firing. Then send the firearm back to the manufacturer, in this case Taurus, to have their expert technicians inspect and repair the safety mechanisms properly.
Frequently Asked Questions (FAQs)
How much is the Taurus 1911 mil spec?
$549.99
Conclusion
Congratulations on making it to the end of this guide! By now, you should have a clear understanding of some common problems that may arise with your Taurus PT1911 and how to solve them. But don’t worry, this is not the end for your beloved pistol. With proper care and maintenance, you can keep it running smoothly and accurately for years to come.
Related Posts:
