Taurus Raging Bull 454 Problems And Their Solutions
Let me guess – you pulled out your trusty Taurus Raging Bull 454 the other day, excited to hit the range, only to find it wasn’t functioning properly.
I’ve been there too. Nothing’s worse than when your favorite revolver starts jamming, failing to extract spent casings, or exhibiting other issues that prevent you from enjoying it.
Well, you’ve come to the right place. As an experienced Raging Bull owner myself, I’ve dealt with my fair share of problems and figured out how to fix them.
In this article, I’ll walk you through the common issues I’ve encountered with my Model 454 and show you the solutions that have worked wonders in getting it running smoothly again.
Some of the most common problems with Taurus Raging Bull 454 are Ejection Problem, Trigger Issue , Misfiring, Cylinder Jamming , Recoil Spring Issue and Cycling Problem.
Common Taurus Raging Bull 454 Problems And Their Solutions
Contents
1. Ejection Problem
As a Taurus Raging Bull owner, I know how frustrating it can be when you pull the hammer back, fire a round, and the spent casing fails to eject properly. This used to happen to my 454 all the time when shooting it single action. I’d have to manually pull the casings out with a rod after every shot.
After some research, I realized the issue was the chambers in the cylinder were no longer perfectly parallel due to repeated firing over time.
This caused the spent casings to bind up instead of ejecting smoothly. The solution was to carefully hone the chambers back to parallel again using a quality gunsmithing hone.
I also make sure to keep the cylinders lightly oiled and free of moisture that could cause binding. After honing my Taurus cylinder, I found it started ejecting spent casings cleanly once again when firing single action.
2. Trigger Issue
You know, I’ve had my trusty Taurus Raging Bull for years now. It’s my go-to revolver for hunting and target practice. But even the best guns need proper maintenance.
I’ve found that the Raging Bull can sometimes develop issues with the trigger if you don’t keep up with cleaning and lubricating it.
What I recommend you do is field strip it regularly. Make sure to clean out any residue or buildup, especially around the trigger parts. Examine the inside of the gun closely.
File down any sharp edges you see that could be causing the trigger to stick when pulled. Also, apply a light coat of gun oil to the moving parts. This will prevent friction and keep everything operating smoothly.
3. Misfiring
One particularly frustrating issue is misfiring. It can happen at the worst possible time – when your aim is spot on and you’re ready to take that perfect shot.
But don’t worry, because I’ve been there and I have some quick solutions for you.
Firstly, check the ammunition. Make sure it’s the correct caliber for your gun and that it hasn’t sustained any damage. If everything looks good, then move on to the firing pin. Over time, this part can become dirty or worn out which can cause misfires.
Simply clean it and if necessary, replace it. Another potential culprit is the hammer spring. If it’s too weak, it won’t provide enough force for the firing pin to strike the primer with sufficient power. Eventually, you may need to replace this as well. And lastly, check your grip on the gun.
A loose or improper grip can lead to misfiring. Make sure you have a solid hold on the gun and that your finger is firmly pressing on the trigger.
4. Cylinder Jamming
I know how annoying it can be when the cylinder jams up on you. When that happens to my 454, here’s what I do to get it smoothly rotating again.
First, you’ll want to open up the cylinder and inspect the alignment closely. Check to make sure the cylinder pin and hole are perfectly straight. If anything looks off, you may need to adjust the pin position slightly to get it sitting exactly right. Consider doing this periodically as a preventative measure.
What I like to do is rotate the cylinder and see that it turns freely with no tight spots. If you take the time to get the cylinder alignment just right, it will pay off with smooth cycling every time you cock the hammer. Keeping that precision adjustment is key for ensuring your Raging Bull cycles and opens flawlessly.
5. Recoil Spring Issue
This is a common issue among gun enthusiasts and can cause frustration and inconvenience when it comes to shooting accuracy. But fear not, as I have been through this situation myself and have found solutions that work.
The first thing you should do is assess the condition of your recoil spring. If it’s worn out or damaged, you will need to replace it with a new one. You can easily find replacements online or at your local gun store. Once you have the new recoil spring, make sure to learn how to properly install it, as improper installation can lead to further problems.
Another solution is to inspect specific parts of your gun, such as the cylinder and firing pin. These can also cause issues with the recoil spring if they are not functioning properly. Make sure to clean these parts thoroughly and lubricate them before reassembling your gun.
In my case, the issue was not with the recoil spring itself, but rather with a loose screw that was causing it to malfunction. I discovered this by taking my gun apart and inspecting each part closely.
So, don’t be afraid to get your hands dirty and figure out exactly what is causing the problem with your gun.
6. Cycling Problem
When that happened with my 454, I rolled up my sleeves and got to work troubleshooting the problem.
First, I manually turned the cylinder and cocked back the hammer to try and free up any sticky spots. I also tried lighter target loads rather than my usual heavy hunting rounds, since the powerful magnums can create more resistance.
To really loosen things up, I worked the trigger double action a few times. Then I gave the whole gun a deep cleaning to remove any built-up residue that might be causing it to bind.
I paid special attention to getting the cylinder to rotate smoothly and index exactly with no tightness. After a good cleaning and manually cycling the action, I was able to get it rotating flawlessly again.
Frequently Asked Questions (FAQs)
What can I do if my Taurus 454 seems to have trouble with the ejector behind the cylinder?
If the ejector behind the cylinder is causing issues, you may need to carefully troubleshoot and seek the assistance of a professional gunsmith if the problem persists.
Is it normal for the Taurus Raging Bull 454 to have some barrel problems?
While barrel problems are not unheard of, they are not common. If you are experiencing issues with the barrel, it may be necessary to have it addressed by a professional gunsmith.
How can I address lock problems with the Taurus Raging Bull 454?
If your Taurus Raging Bull 454 is exhibiting lock problems, carefully examine the weapon and seek professional assistance if necessary. Troubleshooting and regular maintenance may also help prevent lock issues.
Conclusion
Congratulations on completing the Taurus Raging Bull 454 Problems And Their Solutions guide! Now that you have gone through all the common issues and solutions related to your firearm, you are well-equipped to handle any problem that may arise.
Remember, owning a firearm comes with great responsibility. It is important to always practice proper gun safety and maintenance to ensure the longevity and optimal performance of your Taurus Raging Bull 454.
Related Posts:
Taurus Tracker 44 Magnum Problems
