Common Taurus TH9 Problems and Their Solutions

The Taurus TH9 is a popular handgun for self-defense and is known for its accuracy and reliability. However, like any mechanical device, it may experience some problems from time to time. If you own a Taurus TH9 and are experiencing issues, it is important to know how to troubleshoot and fix them.

In this article, we will discuss some common problems that Taurus TH9 owners may encounter and provide tips on troubleshooting and resolving them.

By understanding these issues and how to fix them, you can ensure that your Taurus TH9 performs flawlessly when needed.

Common Taurus th9 Problems and Their Solutions

1. Failure to Feed

Have you ever encountered a feeding failure when using your Taurus TH9 gun? If so, it can be extremely frustrating and potentially dangerous.

Failure to feed malfunctions when a round of ammunition fails to be loaded into the chamber properly.

The causes of this problem can range from improper cleaning and maintenance, an out-of-spec magazine, or improperly stored ammunition.

It is important to thoroughly inspect the firearm before use to prevent a potential malfunction such as feeding failure.

Proper cleaning and maintenance is the first step in preventing and solving failure to feed issues. Before using the Taurus TH9 gun, ensure all components are adequately cleaned and lubricated according to manufacturer recommendations.

This will ensure that all parts are functioning properly and free from debris or corrosion. Additionally, it is important to look for any signs of abnormal wear or damage on the gun before firing.

In addition to regular cleaning, inspecting the magazine for any damage should be done regularly, as malfunctions can occur due to faulty magazines or worn-out springs.

Furthermore, ensuring that the firearm has been loaded with fresh, undamaged ammunition can help avoid problems with correctly feeding rounds into the chamber.

Storing ammunition in a cool, dry place away from direct sunlight will help keep it in good condition for longer.

2. Failure to Eject

The most common cause of FTE is improper ammunition, such as bullets that are too hot or underpowered for the firearm.

This creates excessive pressure inside the chamber, which causes a buildup of unburned powder, failing to eject an empty casing.

Additionally, weak or worn-out extractor springs can also cause FTE as they cannot generate enough tension to expel spent shells from the chamber properly. Improper cleaning techniques can also result in FTE due to the build-up of dirt and grime on the firing pin or extractor spring, preventing them from functioning correctly.

To avoid failure to eject with your Taurus TH9 gun, ensure you use appropriately sized ammo for your firearm and regularly inspect it for signs of wear and tear.

Use proper cleaning techniques when cleaning your weapon; avoid using aggressive solvents or chemicals that could harm the internal components.

Finally, ensure that the extractor spring is regularly replaced as needed; this will help keep your firearm in working order and prevent costly malfunctions during operation.

3. Misfiring Problem

Misfiring problems can occur due to several causes, including poor ammunition quality, improper cleaning or lubrication of the gun, or insufficient gas pressure in the magazine.

Poorly made ammunition is often the culprit behind misfires; it is important to regularly inspect and replace any rounds that show any signs of wear or damage.

Additionally, it is essential to properly clean and lubricate your gun based on the manufacturer’s instructions so that dirt and debris do not accumulate and interfere with firing.

Finally, if using a semi-automatic rifle with a gas system, ensure that gas pressure levels are set correctly according to the manufacturer’s specifications.

If misfires persist even after addressing these potential causes, contacting a professional gunsmith for repair services may be necessary.

In addition, having regular maintenance checks for your gun helps prevent future malfunctions by ensuring all components of your firearm are working correctly.

4. Trigger Slippage Problem

Trigger slippage occurs when the shooter experiences more travel or weight than expected when squeezing the trigger. This can be dangerous, as it may cause an unintentional discharge.

To avoid this, it is important to understand what causes trigger slippage and how you can prevent it.

One of the chief causes of trigger slippage with the Taurus TH9 is that the gun does not have an adjustable trigger. Without adjusting for tighter tolerances, the user cannot customize the feel of their trigger pull and may experience excess travel or weight when squeezing their trigger.

Additionally, grit and dirt can affect how well the gun functions, causing added wear on components and resulting in excess play in action.

Finally, suppose there is too much lubricant on any parts. In that case, this could also increase friction between parts, further adding to possible issues with a trigger pull quality and accuracy.

To solve these problems, users must first understand their firearm’s components, especially when cleaning them.

It goes without saying that all debris should be cleared off regularly by wiping down all surfaces with a soft cloth or using compressed air to remove any dust particles trapped between tight spots.

Additionally, regularly inspect all internal components to ensure they are free from rusting or corrosion, further hindering performance and reliability.

A light lubrication film should be applied after cleaning but not excessively; over-lubricating will only attract dust particles that could lead to further damage over time.

Lastly, proper maintenance of internal parts like springs is important; replacing worn springs ensures consistent results free from errors due to worn-out components.

5. Extractor Detaching

One cause of extractor detachment is improper maintenance. When cleaning your gun, paying close attention to the firing pin and the extractor is essential.

These delicate parts must be properly lubricated and inspected regularly for wear and tear.

Additionally, if components such as springs become too loose or worn down, they are more likely to come off during use.

Another cause of detachments is incorrect ammunition. While most modern handguns are designed to fire a variety of calibers and rounds safely, some guns may be more prone to malfunctioning when fired with certain types of bullets or shells.

If your gun has an extractor damaged due to use with an unsupported bullet type, it could lead to detachment.

Finally, another potential cause of extraction detachment is a faulty part in the gun itself. If there is something wrong with the design or manufacturing process of the firearm, then even proper maintenance and correct ammunition may not prevent problems from occurring during use.

Inspecting all parts carefully before using any firearm is important to ensure everything functions correctly.

As you can see, a few causes can lead to extraction detachment in your Taurus TH9 gun. To avoid these issues in the future, it is important to maintain your firearm regularly and only use appropriate ammunition for its caliber size.

6. Magazine Related Issues

Many owners have struggled with magazine-related problems. These issues can range from magazine-release malfunctions to jamming and other obstacles that impede the use and function of the firearm.

So what can be done to remedy these common issues? Let’s explore the causes of magazine-related issues and offer potential solutions.

One of the main causes of magazine-related problems is poor quality magazines. Many users opt for lower cost third-party magazines that do not meet the same standards as that Taurus offers.

When using a gun such as the TH9, it is important only to use compatible, industry-standard magazines to ensure proper functioning and reliability.

Another possible cause is improper care or maintenance of the gun itself, as well as its magazines. Failing to keep a firearm clean will lead to buildups of dirt and debris that can cause jams or feeding issues.

Ensuring all components are properly oiled and lubricated regularly is also important to prevent dirt from building up around moving parts.

Finally, using rounds or cartridges outside of the standard ammunition size recommended by Taurus can also lead to magazine-related malfunctions.

To resolve magazin-related issues, it is important, first and foremost, for users to purchase compatible factory magazines for their Taurus TH9 guns instead of opting for lower-cost alternatives without conducting proper research first.

Additionally, all guns should be cleaned regularly according to manufacturer instructions to prevent the buildup of dirt and debris, which may inhibit proper functioning.

Finally, only use cartridges or rounds within the size specified by Taurus to ensure reliable performance from your firearm over time.

7. Bullet Case Not Ejecting

One of the most common causes of a bullet casing not ejecting from the Taurus TH9 gun is an issue with the firing pin or its spring. If the spring is weak or damaged, it won’t have enough force behind it to push out the shell casing after firing properly.

To resolve this problem, replace the worn-out spring with a new one compatible with your firearm model.

Another cause of bullet casings not ejecting from your Taurus TH9 gun could be an issue with the slide stop lever.

The lever might need to be adjusted or replaced if it isn’t correctly aligned and positioned to ensure proper firing operation.

Again, depending on your specific model, you may need to visit a qualified gunsmith for assistance in making these necessary adjustments and repairs.

Lastly, if your Taurus TH9 gun’s magazine can’t keep up with rapid-fire, it could also lead to casings not being ejected properly.

This issue can often be addressed by adjusting the magazine’s internal springs, enabling more consistent ammunition feeding into the chamber during high-speed shooting sessions.

Again, consulting a qualified professional for assistance might also be necessary if you’re unfamiliar with making these adjustments yourself.

In summary, understanding what causes bullet cases not to eject from your 9mm caliber handgun is key to resolving any issues quickly and efficiently.

Common culprits range from weak/damaged springs and slides that stop levers out of alignment/positioning to magazines having difficulty keeping up with rapid-fire scenarios.

8. Hammer Bite Problem

Have you ever had your hand painfully pinched by the hammer of a Taurus TH9 compact gun? If so, you have experienced ‘Hammer Bite’ – an issue caused by the gun’s recoil that can be painful and uncomfortable.

The cause of Hammer Bite is primarily attributed to modern firearms design. In guns that use shorter slides, such as the Taurus TH9, the hammer can protrude far enough out of the slide when firing that it can pinch or bite into the shooter’s hand.

This phenomenon is more frequent in handguns with lighter frames and low recoil springs, resulting in higher recoil and more pronounced differences between shots fired.

Fortunately, several measures can be taken to mitigate this problem.

First, ensuring that all firearm parts are properly adjusted is important. Assembling a firearm correctly helps to reduce both felt recoil and muzzle rise during firing.

Secondly, shooting gloves can help protect against Hammer Bite by providing padding for your hands when gripping the gun firmly during firing.

Finally, switching from shooting ammunition with high-pressure loads to lower-pressure loads will also reduce felt recoil and muzzle rise, thus minimizing or eliminating Hammer Bite.

9. The Slide Not Locking Back

One of the main causes of the Slide Not Locking Back is an imperfection in the tolerance levels between the frame and slide back of your firearm.

Sometimes, this issue can be caused by normal wear and tear, improper maintenance or cleaning, or incorrect assembly of your gun during manufacture.

A loose-fitting, misaligned magazine may also contribute to this problem as it prevents the slide lock from engaging.

Another cause could be related to the recoil spring, which works to return the slide forward every time it is released. If your recoil spring is too weak or too strong, it can disrupt the proper functioning of the Slide Lock mechanism, resulting in it not locking back after firing.

Additionally, if your recoil spring has become damaged due to excessive dry-firing (firing without ammo), this can also lead to problems with slide lock-back failure.

Fortunately, several solutions can help you deal with The Slide Not Locking Back on your Taurus TH9 gun.

First, read up on proper gun maintenance and cleaning techniques to fit and align all parts properly. Ensure that any magazines you use are properly seated for them to work correctly.

It would help if you also inspected your recoil spring regularly for any damage or signs of deterioration so that you can replace it when necessary.

In the end, reduce excessive dry-firing as much as possible to avoid putting unnecessary strain on essential components like the recoil spring.

10.Firing Pin Breakage

Unfortunately, broken firing pins are more common than you may think and can be caused by several factors. It is important to understand the causes and take the necessary steps for proper maintenance to prevent this from happening.

One of the most common causes of firing pin breakage is improper cleaning and lubrication. Too much lubricant can cause a buildup of residue, leading to the pin binding in its channel, causing it to become stuck.

This can potentially damage the part and increases the risk of an accidental discharge. Regularly cleaning and properly lubricating your firearm is essential to ensure all components are kept in optimal condition.

Another potential cause is damage inflicted during field-stripping or disassembly of your firearm. When taking apart any firearm, great care must be taken to ensure that all parts are handled carefully.

Any missteps can result in damage or other issues such as misalignment. It is important not to force any components and ensure they fit together snugly before use.

Finally, if an unusually powerful cartridge is loaded in your gun, the firing pin assembly could be too much to handle.

High-powered cartridges require specialized setups and upgrades to handle them safely, so if you plan on using them with your Taurus TH9, ensure it has been appropriately customized first.

The key takeaway is that proper maintenance and handling are essential to prevent breakage or other issues related to your firing pin assembly.

Ensure all components are regularly cleaned, lubricated, and inspected for any signs of wear or damage before each use.

However, contacting a qualified gunsmith should always be considered if a problem arises. They will have the expertise to evaluate and repair any issues with your firearm’s parts quickly and reliably.

11. Stovepipes Problem

A stovepipe is caused by an incomplete or stalled cycle in which the spent cartridge case fails to extract properly from the chamber, leaving part of it still inside.

This can happen when there’s an issue with the gun or its ammunition, such as improper gas pressure or insufficient lubrication.

It can also occur when a shooter fails to properly grip the weapon when firing, resulting in inconsistent recoil control and reduced muzzle lift.

To help prevent stovepipe malfunctions, ensure your Taurus TH9 gun is always adequately lubricated and maintained according to manufacturer recommendations.

Ensure that you use clean and properly sized ammunition and properly fitting magazines.

Also, focus on developing a consistent grip on your gun each time you fire for improved recoil control and muzzle lift.

Finally, if a stovepipe does occur, ensure that you clear it quickly and take appropriate safety precautions before continuing to fire again.

12. Jamming Problem

One of the most common causes of jamming is dirt or debris getting into the gun’s chamber and preventing it from functioning properly.

This could be due to a lack of proper cleaning after use or if a user takes their gun out in dusty or dirty environments.

As a result, dirt and dust can get into the chamber and prevent the rounds from loading properly. To avoid this problem, users should make sure their gun is regularly cleaned and maintained and stored in a cool, dry place when not in use.

Another possible cause could be faulty ammunition. If rounds are improperly loaded or have been damaged by rough handling, they may not fit properly in the chamber, which can also lead to jamming.

To ensure proper performance, ensure all your ammunition is from reliable sources and always follow instructions on proper storage and handling.

Finally, an overly tight recoil spring can also cause problems with jamming since it might not allow enough room for rounds to feed correctly into the chamber. Sticking with springs recommended by the manufacturer for optimal performance is best.

To sum up, there are many potential causes for jamming with your Taurus TH9 gun: dirt and debris getting into the chamber, faulty ammunition, or overly tight recoil springs among them.

You can prevent these problems by ensuring regular cleaning and maintenance, only using reliable sources for ammunition, and sticking with factory-recommended recoil springs.

What Does The User Think About?

The Taurus TH9 is generally well-regarded by users for its reliability, accuracy, and affordability. Many users appreciate the gun’s comfortable grip and easy-to-use features, including the adjustable rear sight and front blade sight.

The gun’s lightweight construction and low recoil make it easy to shoot, even for novice shooters.

However, some users have reported issues with the Taurus TH9, including occasional failures to eject or feed properly. Some users have also reported issues with the gun’s magazine release and trigger pull.

Despite these issues, many users continue to be satisfied with their Taurus TH9s, citing the gun’s overall value and performance as reasons for their satisfaction. Many users find that the gun’s positives outweigh any issues and appreciate the combination of quality and affordability.

What is the Difference Between Taurus th9 vs th9c

The Taurus TH9 and TH9c are both semi-automatic handguns produced by Taurus USA. Here are the main differences between the two:

Size: The TH9c is the compact version of the TH9. It has a shorter barrel and grip, making it more concealable and easier to carry. The TH9 has a full-size frame.

Capacity: The TH9c has a smaller magazine capacity than the TH9. The TH9c can hold 13 rounds in its magazine, while the TH9 can hold 17.

Weight: The TH9c is lighter than the TH9. The TH9c weighs 25 ounces, while the TH9 weighs 28 ounces.

Price: The TH9c is generally less expensive than the TH9. The price difference varies depending on the retailer and any promotions that may be available.

Ultimately, the choice between the TH9 and TH9c will come down to personal preferences and intended use.

Frequently Asked Questions 

Is the Taurus 9 mm a good pistol?

The Taurus 9mm pistol, specifically the Taurus TH9, is generally considered a good firearm by many shooters. It is known for being reliable, accurate, and affordable compared to other handguns.

Does the Taurus TH9 have a Decocker?

No, the Taurus TH9 does not have a decocker.

Which materials are used to build the Taurus TH9?

The Taurus TH9 features a polymer frame and a steel slide.

Can you install laser sight with the Taurus TH9?

Yes, it is possible to install a laser sight on the Taurus TH9.

How many rounds does a Taurus TH9 hold?

The Taurus TH9 is a semi-automatic pistol with 17 rounds of 9mm ammunition in its standard magazine. However, smaller capacity magazines, such as a 10-round magazine for states with magazine capacity restrictions or those who prefer a more compact and concealable firearm, are also available.

How much does the Taurus TH9 cost?

The average price range for a Taurus TH9 was between $300 to $400.

What is the twist rate of the Taurus TH9?

The Taurus TH9 has a 1:10 twist rate.

Conclusion

the Taurus TH9 is a popular and affordable handgun that offers reliable performance and accuracy for many users.

While some users have reported issues with the gun’s performance, such as occasional failures to eject or feed properly, some steps can be taken to mitigate these problems.

Regular cleaning and maintenance, high-quality ammunition, and proper grip and technique can help prevent or minimize any issues with the Taurus TH9.

Additionally, if problems persist, it may be necessary to seek the assistance of a qualified gunsmith to inspect and repair the firearm.

The Taurus TH9 can provide many years of reliable and enjoyable use with proper care and attention.