Common Del-Ton AR-15 Problems And Solutions

The DEL-TON AR-15 has become an increasingly popular rifle of choice for many gun enthusiasts, due to its impressive capabilities and affordability.

However, like any weapon, the DEL-TON AR-15 is not without its own set of common issues.

In this blog post, we will explore some of the most common problems associated with the DEL-TON AR-15 and provide helpful advice on how to resolve them. Read on to find out more!

Common Del-Ton AR-15 Problems And Solutions

So, if you’ve been struggling with your AR-15, then read on to find out what you can do to get it back in perfect working order.

1. Extractor Problems

One of the most common problems with the Del-Ton ARr-15 Rifle is extractor issues.

This issue can occur when the extractor becomes broken or damaged, which can cause problems in both loading and ejecting cartridges.

The extractor is an important component of the gun as it helps extract spent rounds from the chamber and loads new rounds into it.

When this happens, the gun may fail to eject spent cartridges after firing or fail to load a round into the chamber fully.

If not appropriately addressed, this issue can lead to further damage over time, including jamming or misfires. Regular checkups and inspections should be done on the rifle to prevent this issue.

Checking for wear and tear on parts that come into contact with each other during operation—such as the extractor—is essential for keeping your gun in good condition.

If you notice any signs of damage or excessive wear, replace these parts immediately before further damage is done. Ensure that all components are clean and free of debris or dirt, which can also contribute to this malfunction.

Furthermore, you must use quality ammunition compatible with your rifle to minimize malfunctions due to incorrect ammunition size or design issues.

2. Failure to Eject Rounds

If you’re having trouble with rounds failing to eject from your Del-Ton AR-15 rifle, it’s important to understand the possible causes and how they can be fixed.

Failure to eject rounds is often caused by a weak or broken extractor spring, an improperly adjusted gas system (too much or too little gas pressure), or a dirty bolt carrier group due to the buildup of carbon and other debris around the bolt.

The most common fix for this issue is to check and replace the extractor spring as necessary, ensuring enough tension to grab and pull back on spent cartridges properly.

If the problem persists after replacing the spring, adjusting and tuning the gas system may be necessary.

This involves using a combination of different buffer weights, springs, and adjustable gas blocks to regulate how much gas is released each time you fire your rifle.

3. Trigger Reset Issues

The trigger reset issues that can occur with the Del-Ton ARr-15 Rifle are tricky to troubleshoot. If you’re experiencing this issue, it’s important to go through some steps to identify and fix the problem as quickly as possible.

First of all, if you’re having difficulty with the trigger reset on your rifle, it’s important to inspect the components of your rifle for any signs of damage or wear.

This includes inspecting for signs of dirt or grime build up on the trigger mechanism, which may cause it to stick or fail to reset properly. Additionally, check for any binding within the trigger housing itself – often, this can be caused by a lack of lubrication within the trigger assembly.

It also helps to check your rifle’s hammer spring and make sure that it is not broken or worn out. If any of these components seem damaged or faulty, then they should be replaced as soon as possible to ensure optimal firearm performance.

In some cases, another potential cause for trigger reset failure may be an improperly set disconnector spring tension.

To adjust this setting correctly and remedy this issue, remove the upper receiver from the lower receiver; hold down the rear takedown pin while pushing forward on the rear takedown detent spring until the pin is released.

Next, push back on both ends of the disconnector spring until it is flush with its hole in both receivers; this should bring enough tension so that when you pull back on either side of it, there will be enough resistance for proper operation when firing your gun.

Finally, if after checking all of these potential issues and making adjustments accordingly, your Del-Ton ARr-15 Rifle still fails to reset its trigger correctly, then there may be an issue with either its hammer spring plunger or its sear disengagement plunger needing replacement; however, before attempting such repairs yourself we advise consulting a qualified gunsmith who can more accurately diagnose and repair whatever problems may exist within your firearm.

4. Magazine Release

Have you ever encountered a frustrating issue with your Del-Ton ARr-15 Rifle where the magazine doesn’t seem to want to release, no matter how hard you press the magazine release button?

Well, don’t worry because this is a common problem that every gun owner should know how to fix. There are several reasons why this can happen; we will look at each and how to resolve them.

First, it could be due to dirt or debris blocking the mechanism inside the magazine catch. This often happens when dust and dirt buildup over time, preventing the button from releasing the mag.

To handle this situation, inspect your rifle’s magazine catch carefully and make sure nothing is blocking it. Then use a soft brush such as a toothbrush or even a cotton swab moistened with solvent or oil to gently clean out any debris that has built up.

Another cause of sticking magazine releases is an overly tightened screw on the mag catch.

When this happens, it can prevent the release from being pressed fully, hence not allowing for proper disengagement of the magazine.

To address this issue, loosen up the screw until it moves freely when pressed down but tight enough so that it won’t accidentally disengage.

Finally, if none of these solutions work for you, then something more serious is wrong with your rifle’s mag catch mechanism, and it would be best if you take it to a qualified gunsmith for diagnosis and repair.

5. Jamming Issues

It is important to determine the root cause of a jamming issue with an AR-15 rifle. What type of ammunition are you using?

How long have you had the rifle? Have you cleaned and lubricated it per the manufacturer’s instructions? These questions can help identify what is causing your rifle to jam.

The most common reasons for jams in an AR-15 include using poor quality or incorrect ammunition, dirty or worn parts, improper cleaning and lubrication, and even improper assembly.

Poor quality or incorrect ammunition can cause significant issues with how the weapon cycles properly and may lead to frequent jams or even catastrophic failures.

Dirty, corroded, cracked, or otherwise worn parts can also contribute to jams as they will not function correctly when cycled.

Additionally, if the rifle has been improperly assembled, this could also lead to jams.

Incorrectly placed pins and parts that are out of alignment can cause jams that cannot be cleared quickly.

To fix a jamming issue with your AR-15 rifle, you should inspect all components for any damage, such as corrosion or cracks, that may prevent proper operation.

If no visible damage is found, you should remove any dirt, debris, or old lubricant from the components of your weapon and reassemble it according to manufacturer instructions.

Make sure that the components are clean and well lubricated before reassembly, as this will ensure they move smoothly when cycled.

Once reassembled correctly, you should test fire at least 10 rounds of known good ammunition without any issues before returning it to service.

If there are still problems after properly assembling and testing the firearm, then it may be necessary to replace certain worn parts or contact a gunsmith for further assistance in diagnosing the issue.

6. Ammo Feeding problems

Are you having issues with ammo feeding problems on your Del-Ton AR-15 rifle? If so, you may need additional information to help you troubleshoot and determine the source of the problem.

Ammo feeding problems are generally caused by not only wear and tear on the firearm but also improper use and maintenance.

Issues can range from a malfunctioning magazine to dirty or corroded ammunition. To help diagnose and fix the issue, here are some tips and suggestions for troubleshooting ammo feeding problems with your Del-Ton AR-15 rifle.

First, inspect the magazine and ensure that it is properly inserted into position in the rifle’s lower receiver.

This is key as without proper insertion, no troubleshooting will make a difference as it won’t allow ammo to feed into position properly.

Also, examine the mag follower for signs of wear or damage, which could prevent rounds from entering the chamber when fired.

Make sure that all components are firmly attached, and free from any signs of corrosion or dirt build up.

Next, check how easily you can move your bolt carrier group (BCG). If it is difficult to cycle due to excessive friction or wear, then this could be causing your rounds not to properly feed into place during firing.

Be sure to take note of any unusual sounds, such as grinding, when operating your BCG; this could indicate an issue with its internal moving parts or springs that might need attention before attempting further troubleshooting steps.

Inspecting your cartridges for signs of dirt or corrosion would be best, which could impede their ability to properly cycle in conjunction with other components such as magazines or BCGs.

While inspecting ammunition try using a flashlight to look inside each case at each round’s primer cup; if there is any discoloration present, this could indicate a problem with either the brass casing or primer compound, which could cause loading issues during cycling operations.

Finally, clean all parts thoroughly until everything looks like new again; take special care not to damage any internal components while cleaning out dirt deposits from sensitive areas such as extractors, firing pins and chambers!

7. Inadequate Sights

Have you ever experienced trouble with the sights on your Del-Ton AR-15? If you have, you’re not alone.

Many shooters have difficulty getting their sights adjusted to the level of accuracy they expect from their rifles.

Poorly adjusted sights can be incredibly frustrating and may even impede your ability to hit your target. So what causes inadequate sights, and how can you fix them?

The most common cause of inadequate sights is improper setup. When a rifle is assembled for the first time, it must be properly sighted to achieve optimal accuracy.

This requires making sure that both the front and rear sights are securely fastened to the barrel and that they’re aligned correctly relative to each other.

It also involves adjusting windage and elevation screws on the sights so that they coincide with specific distances at which you intend to shoot. Once these steps are complete, shooting should become much more accurate.

Other factors that can contribute to inadequate sights include dirt or debris buildup in the barrels or around the sight components and damage due to wear over time or poor handling during transport or storage. You’ll want to inspect your sights regularly for any clogs that might be causing inaccuracy, as well as look for physical signs of wear that could indicate damage or misalignment of parts.

To prevent problems with inadequate sights, it’s important to properly maintain your rifle by cleaning it regularly and keeping an eye out for any signs of wear or damage.

Additionally, you should periodically check all screws and other fasteners on the barrel and sight components to ensure they’re secure and not too loose or too tight; this will help prevent accidental adjustments from being made without your knowledge.

8. Low Accuracy

Have you ever struggled with the accuracy of your AR-15 rifle?

While this popular weapon is an excellent choice for recreational shooting and hunting, a lack of accuracy can be a major problem.

If your shots are consistently off target, there are several potential causes to consider and ways to address them.

The most common cause of poor accuracy with an AR-15 is improper maintenance or user error in assembly. If the gun has not been regularly cleaned, the gas tube and bore may be fouled with residue from burned powder or other debris.

This can affect the projectile’s flight path by creating resistance inside the barrel when fired.

Improper assembly can also lead to inaccuracy in many cases; if a part is misaligned or loose, it could cause changes in pressure or velocity, disrupting the bullet’s trajectory.

Additionally, heavy recoiling rifles like the AR-15 require users to practice proper stance, grip, and trigger control to maintain shooting accuracy.

To fix an AR-15 exhibiting inaccurate performance, it is important to inspect all components for proper alignment and fit.

The bolt and carrier should move freely without any grit or grinding sounds, all pins should be firmly seated without any wiggling or play, and all parts should be properly lubricated before use.

After confirming everything is correctly assembled and functioning as intended, check for signs of excess fouling or blockages within the chamber and gas tube that might reduce velocity or otherwise impact accuracy.

9. Poor ergonomics

Are you having trouble adjusting to the ergonomics of your Del-Ton AR-15 rifle?

Are you finding it difficult to use your rifle in the field comfortably? If so, there are several potential causes for this issue and ways to fix it.

Poor ergonomics in a rifle can be caused by a variety of factors.

The most common cause is an improper fitment between the size and shape of your body and the shape of the stock or forend of the rifle.

This means that if the stock and forend have too much curvature or too little curvature, they may not fit well with your body type. The same can be said if they are too short or too long.

Furthermore, different material types can also contribute to poor ergonomics; plastic stocks may be more brittle than wood stocks, while metal stocks may absorb more heat and become uncomfortable after extended use.

These issues can generally be addressed with some simple modifications.

The first step is to measure yourself accurately to know your ideal stock length and comb height.

Once you have those measurements, you can purchase a custom length or adjustable stock that will fit your frame properly.

Another option is to purchase aftermarket parts such as cheek risers or spacers which can help make sure that your head is at the proper height when using iron sights or optics. Lastly, if you are using a plastic stock, consider upgrading it with one made from aluminum or another durable material that will provide better comfort during operation.

By addressing these common causes of poor ergonomics on Del-Ton rifles, you can improve your shooting performance and increase its longevity due to improved maintenance and care practices.

10. Bolt Not Locking Back After The Last Rounds Is Fired

Do you often find that your Del-Ton AR-15 rifle does not lock back after the last round is fired?

If so, you are likely experiencing an issue with the bolt catch. The bolt catch is designed to engage the bolt’s locking lugs when the last round has been fired and hold it in place, allowing for easier reloads.

Unfortunately, if the bolt catch isn’t functioning properly, this will not occur. In these cases, it can be fixed by addressing several potential issues.

First, make sure that your magazine is clean and in good condition.

If any dirt or debris is preventing a proper fit in the magwell, this could affect how far your bolt travels forward when chambering a round and result in not enough backpressure on the bolt catch to engage it fully.

Also, check to ensure that your mag well is clear of any obstruction, such as rust or dust, that may prevent the magazine from full seating.

Second, inspect all of the internals of your AR-15 to ensure they are operating correctly and properly lubricated with quality gun oil or grease to keep them running smoothly and reduce friction between parts.

A worn out firing pin or extractor spring should also be replaced for optimal performance.

Additionally, inspect any springs related to the bolt release lever assembly; these include both coil and flat springs ensuring they are free from any corrosion or damage which could hinder their function.

Finally, take some time to adjust the tension on your buffer spring and replace it if necessary; too much tension can prevent proper operation of the Bolt Catch Release Lever while too little can cause premature engagement by releasing pressure off of the bolt catch too soon resulting in misfires.

It may also help to use a lighter weight buffer which will allow for faster rounds cycling, creating more pressure on your Bolt Catch Release Lever and thus increasing its effectiveness at engaging when needed.

11. Receiver or Bolt Carrier Group Cracks

Have you ever encountered a situation where you were out at the range, and your AR-15 started to malfunction or experienced any cracking on the receiver or bolt carrier group?

If so, it is essential to understand why this issue occurs and how to fix it properly. There are several reasons why an AR-15 receiver or bolt carrier group may develop cracks, such as overcharging of ammunition, an improperly headspaced barrel, using faulty magazines, or the use of a weak buffer spring.

All of these problems can be addressed by taking certain steps to ensure proper maintenance and safe shooting practices with your firearm.

To begin with, when it comes to safety, it is always important to ensure that your ammunition is charged correctly for your specific rifle.

The incorrect charge can cause excessive pressure on your gun parts, leading to fractures in the receiver or bolt carrier group.

It is also important to check whether the barrel was correctly headspace when first purchased since a misaligned barrel can create too much pressure inside the chamber, causing fractures in these parts.

In addition to this, if you are having issues with feeding rounds from an aftermarket magazine, it could be worth investing in better quality magazines as some lower quality mags may cause friction between rounds leading them not to feed properly and thus potentially causing fractures in these parts as well.

Finally, another point worth considering is that people often opt for lighter buffer springs to reduce felt recoil. However, doing so might also reduce the effectiveness of cycling mechanisms, leading to potential cracks due to overstress on those parts.

Frequently Asked Questions

Are Del-Ton AR-15 any good?

Yes, Del-Ton AR-15 rifles are very good. They are well-built, reliable, and accurate. They offer quality components and excellent craftsmanship at an affordable price. Del-Ton rifles are a great choice for those looking for a high quality AR-15 rifle.

Is Del-Ton a good brand?

Yes

Are Del-Ton lowers any good?

All in all, Del-Ton lowers are a great choice for anyone looking for an affordable and reliable lower receiver.

Where are Del-Ton AR-15 made?

Del-Ton AR-15 rifles are made in Elizabethtown, North Carolina. The company has been manufacturing these rifles since 2000 in their own facility. They use high quality components made in the USA and are known for their accuracy and reliability.

Who makes Del-Ton AR-15?

Del-Ton Incorporated

Are Del-Ton AR-15 mil-spec?

Yes

How much is a Del-Ton AR-15?

A Del-Ton AR-15 varies depending on the model and features, but a basic model can range from around $600 – $800.

Conclusion

The Del-Ton AR-15 is an amazing gun that has many practical applications.

With all of its advantages, this gun can have some issues that are hopefully now solved by the insights provided in this post. Despite some potential problems, it is important to remember that if you take good care of your AR-15 and keep it regularly cleaned and maintained, it should provide you with years of reliable use.

Plus, it’s a fun gun to shoot! So enjoy spending time at the range with your prized AR-15, always remember safety first, and you should find yourself well on your way to becoming a successful shooter in no time.

Related Posts:

• Common Sig M400 Tread Problems and Their Solutions
• Common Diamondback DB10 308 Problems and Their Solutions
• Common Sig Sauer 516 Problems And Their Solutions
• Common Sig Sauer 716 Problems And Solutions
• Common Remington 710 Problems and Solutions