Savage A17 Problems And Their Solutions
The Savage A17 rifle has been popular among shooters since it was released in 2015. However, some users have reported difficulties with the rifle over time.
Some of the common problems reported by the users of A17 include Magazines Difficult to Load, Feeding Issues, Barrel Heating Issues, Stock Issues, Won’t Eject Shells, Ammo sensitivity, and Jamming Issues.
This guide will discuss the most common problems encountered when using a Savage A17 and provide tips to help you troubleshoot them.
Common Savage a17 Problems And Their Solutions
Contents
1. Magazines Difficult to Load
If you’re having trouble loading magazines into your Savage A17, you can do a few things to make the process easier.
First, ensure that the magazine clip has been properly seated in the gun; this will help ensure proper alignment and allow for smoother loading. Keeping the gun clean is also important – a buildup of dirt or debris can make it difficult to insert magazines.
If the magazine still has trouble loading, you may need to adjust the gun’s alignment.
Depending on your model, this adjustment can be made by manipulating screws or nuts near the magazine port.
Refer to your manual for detailed instructions on properly adjusting the alignment.
2. Feeding Issue
Some users reported a failure to feed issue with this rifle. The firearm is having trouble loading the next round from the magazine during the first 2 or 3 shots, as they reported.
This could be due to the bolt dragging, too much pressure or an old clip. To address this issue, first unlock and rack the bolt to reload the firearm.
After that, use some spring tension to return the bolt to its original position. If the issue persists, it could be a good idea to invest in a brand-new clip for your Savage A17 as this is likely to resolve the matter.
3. Barrel Heating Issue
The barrel heating issue with Savage A17 rifles is a very common problem that can lead to serious malfunctions if not addressed quickly and correctly.
The problem arises from the design of the rifle, which causes more heat buildup than normal in the barrel due to excessive pressure and friction from firing.
This can cause parts within the gun to expand, creating misfires or jams and leading to premature wear on the rifle.
To remedy this issue, Savage A17 owners should make sure their rifles are cleaned and lubricated regularly. This will minimize any buildup of heat or dirt in the barrel and allow for smoother gun operation.
Also, it’s important to use the correct ammo when shooting an A17 rifle—using something too powerful or hot for the rifle can worsen the barrel heating issue.
4. Stock Issues
Savage A17 rifles have encountered some issues related to their stock components. It has been reported that the stocks of Savage A17 rifles may crack and break, which can lead to safety concerns for users.
This is especially true if a broken stock were to be used or replaced with an inferior quality aftermarket part.
In response, Savage Arms recommends either sending in the rifle to their service center for repair or replacement or replacing the stock with an aftermarket stock.
It is important to note that any aftermarket parts used might not be compatible and risk further damage. For this reason, it is strongly advised to use only genuine Savage Arms parts whenever possible.
5. Won’t Eject Shells
If your Savage A17 isn’t ejecting shells, several reasons exist. The most common are dirt or debris inside the gun, a rim thickness of the cartridge that’s not within the manufacturer’s specified range (.044″ – .050″), an incorrectly machined clip, or a bolt face depth that is too shallow.
To troubleshoot the issue, ensure the gun is properly cleaned and lubricated. It’s important to use quality lube so that dirt or debris can be easily removed without causing any damage to the weapon.
If the cleaning process does not resolve the issue, you will need to examine each of these potential causes to determine what is wrong.
If it turns out that the rim thickness of the cartridge is not within range, then you will need to purchase new cartridges with a compatible rim thickness.
It’s important to note that some manufacturers have different specifications for their weapons, so be sure to check your user manual for more information on this before making any changes.
If it turns out that the clip was improperly machined or the bolt face depth is too shallow, then you may need to send the gun back to be serviced.
This is typically done by a qualified gunsmith or firearms technician who can properly inspect and repair your weapon.
6. Ammo Sensitivity
The Savage A17 is a semi-automatic rifle that has experienced some issues with ammo sensitivity. This means that the gun will not fire correctly, if it is using the wrong type of ammunition.
While this issue can be solved through proper maintenance and cleaning of your firearm, it can also be prevented by carefully selecting the type of ammo you use in your Savage A17.
There are two critical factors to consider when selecting ammo: caliber size and bullet weight. Using the wrong combination of these elements can cause a misfire or damage your gun.
Always make sure that you purchase ammunition designed for use in your particular rifle model, as each model has specific requirements. Furthermore, if you are unsure about which type of ammunition to use, it is best to contact a certified gunsmith for advice.
7. Jamming Issue
If you’re having jamming problems with your Savage A17, it can be very frustrating. Jamming is usually caused by dirt and debris in the chamber or magazine, so ensure these areas are clean before firing. If the issue persists after cleaning, you may need to inspect other rifle parts.
Start by inspecting the feed lips on either the magazine or the chamber for any signs of damage. If they appear to be in good condition, try checking the ejector and extractor mechanisms.
If these parts are worn out or damaged, replace them with new components as soon as possible.
Finally, ensure your ammunition is up to spec and not causing any issues.
8. Trigger Problems
The Savage A17 rifle has been seen to suffer from trigger pull problems. The issue arises when the rifle is consistently fired at a fast rate, and the trigger begins to fail short of full reset. This can cause misfires and other issues with the gun’s functioning.
A common fix for this is adjusting the trigger to have a lighter pull weight, allowing it to reset more easily.
However, this should only be done by a qualified gunsmith or other firearms technician as altering the trigger on any firearm can cause complications if not done correctly.
In addition to adjusting the trigger pull weight, it’s important to regularly clean and inspect your A17. This will help identify any issues that could potentially lead to trigger pull problems before they become more serious.
It’s also a good idea to purchase replacement parts for the gun, such as a replacement trigger assembly if necessary, to help ensure your rifle is functioning properly.
Lastly, it may be beneficial to fire the rifle on an outdoor range with a target at least 100 yards away in order to test the accuracy of the trigger.
This will help identify any issues that might be causing the trigger pull problems so that they can be addressed before it become a safety issue.
Frequently Asked Questions
Can the feeding problems be solved using a different rimfire ammunition brand?
Yes, using a different brand of rimfire ammunition can often solve the feeding problems. Some users have reported success with specific brands such as CCI and Federal.
Are there any specific actions that need to be taken to prevent misfires?
To prevent misfires, it is recommended to clean the rifle and ensure proper lubrication thoroughly. Also, checking the firing pin and replacing worn-out parts can help prevent misfires.
I have heard that the Savage A17 is quite heavy. Is this true?
Yes, compared to some other rimfire rifles, it is on the heavier side. However, this can also be seen as an advantage as it helps reduce recoil and provides better stability during shooting.
Does the Savage A17 require a break-in period?
A: No, it does not require a break-in period.
Is the Savage A17 available with different stock options?
Yes, it is is available with different stock options. You can choose between synthetic stocks or laminate stocks, depending on your preference.
Can I use the A17 for rapid fire shooting?
Yes, It is designed for rapid-fire shooting. Its semi-automatic action allows for quick follow-up shots.
I’m having difficulty sighting in my scope on the Savage A17. What should I do?
Make sure to check the mounting and alignment of the scope. Using quality scope rings and bases is also advisable for better stability.
Is the 17 HMR ammunition the only option for the Savage A17?
No, the 17 HMR ammunition is not the only option. While it is specifically chambered for the 17 HMR round, other similar rounds are available, such as the 17 Mach 2, that can also be used.
Conclusion
In conclusion, the Savage A17 has proven to be a popular and reliable rifle in the hunting community. While there have been issues with some of the components associated with it, if proper maintenance is performed, these can all be overcome.
Also, users familiar with their firearm’s anatomy can easily address any minor issues they may encounter while using the rifle.
These steps will help ensure users maximize their performance and enjoy a successful hunting experience with the Savage A17.
Related Posts:
Ruger American Predator Problems
