The SIG Scorpion 1911 is a classic handgun, known for its reliability, accuracy, and strength. But even this trusted firearm can encounter problems.
Still, no firearm is completely flawless and the Sig Emperor Scorpion 1911 is not an exception. Among its most widespread issues are FTF (failure to fire) problems; failure of the slide to go into the battery; extractor malfunctions; slide locking errors, and hammer drop difficulties.
In this blog, we’ll explore the common issues that arise with the SIG Scorpion 1911 and offer solutions to help you keep your gun in top condition. Whether you’re an experienced shooter or new to the gun world, you’ll find valuable information here.
Common Sig Scorpion 1911 Problems and Their Solution
Owners of SIG Scorpion 1911’s often face a variety of issues. To help resolve them, here are some common problems and solutions.
1. FTF Issues:
Trying to get through a magazine without at least one Failure To Feed (FTF) issue is practically impossible.
It seems as though the issue is tentatively worse if the magazine is a JHP – the cartridge will detach from the magazine and climb up the ramp but fail to fully engage with the battery.
It often gets confusing because spotting any issues with its hidden brass casing can be difficult.
Regardless of what type of magazine, FTFs are very common, thus making it paramount to be aware when they arise and take action to resolve them.
Malfunctions with firearms, such as Failure to Feed (FTF)s, are an issue that all gun owners should be aware of.
Thankfully, the most common cause of FTFs is something you can easily locate on the gun: the feed ramp. If, after extensive use, you find yourself dealing with FTF issues on your gun, polishing the feed ramp will likely take care of these problems.
Additionally, investing in good magazines such as Sig mags, Wilson and Chip McCormick power mags can also go a long way in terms of keeping FTF issues at bay – often times, these magazines have smoother bases which helps feed cartridges more reliably into the chamber.
2. Extractor Issues:
The extractor of your gun plays an important role in its operation. You may experience jamming and other issues if it’s not properly adjusted.
One particular issue is whether the ejector needs to be tight enough.
This has to do with how the notch for the ejector has been cut out – if more pressure has been applied, it can only properly perform its purpose of pushing out spent casings from the chamber.
SIG firearms are well constructed, but sometimes problems may arise in the functionality of your SIG. In such cases, it could be wise to replace the ejector.
SIG employs experienced gunsmiths with specialized knowledge in maintaining and replacing this type of part.
If you need more certainty about replacing the ejector on your own, taking it to a reliable gunsmith with access to reverse-cut drill bits is also a viable option, as they can maintain extremely tight tension while performing the replacement.
With either CHOICE–replacing the ejector yourself or having it done professionally–you can be assured that you’ll get your SIG back up and running without issue.
3. Slide Locking Issues:
Slide locking issues are a common problem among firearm users and typically occur when the slide does not fit perfectly onto the frame or when ridges and surfaces of the slide become tough.
This can cause it to jam halfway back as it normally would after firing the last round from a magazine and can also mean that when there is no round in the chamber, the slide will not lock back into its open-chamber position.
Keeping your handgun in proper working order and well-maintained is crucial for safe, effective use.
To ensure it operates optimally, fill your magazines to their fullest capacity and leave them loaded overnight so the springs can settle into their proper positions.
Use approved lubricants to lubricate all necessary parts, such as the slide stop and plunger tube.
Lastly, test any ammo you plan on using, ideally 230-grain brass-cased factory-made ball ammunition.
To ensure your Scorpion is in optimal condition before firing, make sure to thoroughly clean and lubricate it. Additionally, verify that the follower is making contact with the slide stop by inserting an empty magazine into the handgun.
4. Hammer Drop Issues:
The hammer drop issue is another common problem encountered with firearms today. Users often find that their hammer falls to the tell-tale half-cocked position as they put the slide in its passive position. The root cause is usually attributed to a worn or damaged sear spring, but don’t be fooled – even a new sear may not fix the problem.
To determine if you have an issue beyond your sear spring, take off your slide release and let it crash forward; this will allow you to assess whether or not the whole assembly is catching on something throughout its motion, resulting in an undesired stumble of sorts as it comes to rest.
Replacing the sear spring with one from a Wilson Combat Spring kit is a simple process that even novice gunsmiths can do. Stop releasing the slide when there is an empty chamber, as it puts too much strain on all the components involved, making it difficult for the slide to open.
If your pistol has a great stock trigger, resist any temptation to do trigger work, as it could cause damage or ruin its performance.
To complete this task, you need to replace your hammer, seal the connection, and then you’re good to go.
5. Failure to Go Into Battery:
When a firearm is not properly taken care of, it can develop issues in firing and become unreliable.
In particular, when the gun gets dirty, failure to go into battery issues may arise due to small chambers, which limits the number of rounds that can be fired without fail – typically around 50 rounds.
To avoid similar incidents from happening again, close the slide before reloading the gun.
After proper maintenance, you should have no problems racking or dropping the slide from a locked position.
Keeping your gun in a pristine condition improves life expectancy and makes for a more enjoyable shooting experience. To make sure your gun is in its best shape, it’s important to do routine maintenance, like ensuring the slide or frame fitment stays lubricated and clean.
Doing a quick wipe-down of the mechanism every few weeks can go a long way to keeping any dust or debris away and maintaining the smooth action you expect from your firearm.
Additionally, adding a light lubricant coating at regular intervals will help keep out moisture and dirt, ensuring that all parts remain in working order so that your gun looks and operates just like it did when you first bought it.
With these simple steps, you should have no problem keeping your gun like the picture provided!
Frequently Asked Questions
How many rounds of magazines did Colt make for 1911?
1911 is one of the most iconic handguns of all time, and it was originally released with a 7-round magazine. This magazine was designed by Colt’s Manufacturing Company and made from aluminium alloy or steel.
Today, however, 1911 is available in magazines with capacities up to 10 rounds at most gun shops nationwide.
What type of coating is done on SIG Scorpion 1911?
The Emperors are a unique type of firearm with some notable features that make them stand apart from the rest. Starting with their finish, they come equipped with a Physical Vapor Deposition (PVD) coating that is much more durable than the Nitron finish used on other firearms.
This type of coating gives them superior surface protection and resistance to wear, making them perfect for extended use in any environment.
On the other hand, the standard Scorpions come with a Cerakote paint finish, providing an attractive look and superior corrosion resistance compared to other finishes.
Does the SIG Scorpion 1911 Have Any More or Fewer MIM parts than DW?
The SIG Scorpion 1911 pistol and 1911 from Dan Wesson (DW) may look quite similar at first glance, but one can note the difference in their construction on closer inspection.
While both firearms use Metal Injection Molding (MIM) for some parts, the SIG seems to utilize MIM for a greater range of components.
This gives it an extra strength not available with DW’s typical production process. The SIG’s hammer, sear, and disconnector are all made from MIM-processed materials, whereas Dan Wesson uses non-MIM parts for its 1911 models.
The SIG Emperor Scorpion 1911 can certainly turn heads with its striking design, but the issue continues.
From frustrating failure-to-feed issues to unexpected tightness, this pistol is marred by users’ problems.
Coupled with its limited advantages, it becomes evident that this model from the 1911 series is best avoided.
It gives gun owners a range of compatible ammunition, but these benefits are insignificant compared to its flaws.
Therefore, you should investigate other options from SIG or other gun makers for a reliable firearm.
- Common Sig Ultra Compact 1911 Problem and Solutions
- Sig P365 Xl Problems and Their Solutions
- Common Sig Sauer 716 Problems And Solutions
- Common Sig p320 AXG Scorpion Problems & Solutions
- Common Sig P365 Problem And Their Solutions