Springfield Hellion Problems And Their Solutions

Whether you are a seasoned gun owner or just starting, it’s important to know the ins and outs of your firearm.

The Springfield Hellion rifle is known for its accuracy and reliability, but even the best guns can have their share of issues.

In this guide, we will look in-depth at common problems that may arise with the Springfield Hellion rifle and provide practical solutions to address them.

Some of the most common problems reported by the users of Springfield Hellion rifle are Misfiring, Feeding Problems, Ejection Port Cover Issues, Failure To Eject, Not chambering rounds, Jamming Problems, Trigger Pull Problems, and Accuracy Problems.

Springfield Hellion Problems

Common Springfield Hellion Problems And Their Solutions

1. Misfiring

Misfiring can be frustrating and even dangerous if not handled properly. However, it can be easily avoided and resolved with proper knowledge and precautions.

One of the main causes of misfiring is improper loading of the firearm.

If the cartridge is not properly seated in the chamber or if there are any obstructions in the barrel, it can prevent the primer from making proper contact with the firing pin.

Always load your firearm correctly and check for any obstructions before firing.

Another common cause of misfiring is using old or damaged ammunition. Over time, the primer in a cartridge can become less effective and may fail to ignite the gunpowder.

It’s important to regularly check your ammunition for signs of damage or corrosion and replace it if necessary.

Additionally, issues with the firing pin can also result in misfiring. If the firing pin is worn down or damaged, it may not be able to strike the primer and ignite the gunpowder properly.

Regularly inspecting your firearm can help identify any potential issues with the firing pin.

2.Feeding Problems

Some possible causes of feeding problems include improper assembly, incorrect magazine usage, poor ammunition quality, or dirty or damaged magazines. It is important to identify the root cause to find an effective solution.

To ensure proper assembly, it is recommended to carefully follow the manufacturer’s instructions and make sure all parts are securely in place. Any loose or incorrectly placed components can cause feeding issues.

Using incorrect magazines for your rifle can also lead to feeding problems. Different rifle models may require different types of magazines, so be sure to use the appropriate one for your rifle.

Poor ammunition quality can also be a cause of feeding problems. Low-quality or damaged rounds may not feed properly, resulting in malfunctions. It is important to use high-quality ammunition from reputable brands.

Lastly, dirty or damaged magazines can also lead to feeding issues. It is essential to regularly clean and maintain your magazines to ensure they are functioning properly. If a magazine is damaged, it should be replaced immediately.

3. Ejection Port Cover Issue

Several factors can contribute to the ejection port cover issue in Hellion Rifles. Some of the common ones include:

  • Build-up of dirt, debris or oil on the cover or its surrounding areas
  • Improper assembly or installation of the cover
  • Damaged or worn out ejection port cover spring
  • Faulty design of the ejection port cover mechanism

It is important to identify the root cause of the problem to find an effective solution.


Fortunately, a few simple solutions can help resolve the ejection port cover issue in Springfield Hellion Rifles. These include:

  • Thoroughly cleaning the ejection port cover and its surrounding areas with a solvent or degreaser
  • Replacing the damaged or worn out ejection port cover spring with a new one
  • Ensuring proper assembly and installation of the cover according to the manufacturer’s instructions
  • If possible, making adjustments to the ejection port cover mechanism to improve its functionality

If these solutions do not work, it is recommended to seek assistance from a professional gunsmith who has experience with Springfield Hellion Rifles.

They will be able to diagnose the issue and provide a suitable solution.

4. Failure To Eject

There are a few potential causes for failure to eject, including:

  • Dirty or worn extractor: The extractor pulls the spent casing out of the chamber. Over time, it can become dirty or worn down, failing to eject.
  • Weak or broken ejector spring: The ejector spring helps push the spent casing out of the firearm. It may not have enough force to eject the casing properly if it becomes weak or breaks.
  • Improperly sized ammunition: Using ammunition that is not the correct size for your rifle can cause failure to eject.
  • Improper lubrication: Without proper lubrication, the moving parts of your firearm may become stuck or jammed, leading to failure to eject.

If you are experiencing failure to eject with your Rifle, there are a few solutions you can try:

  1. Clean and inspect the extractor: Make sure to regularly clean and inspect your extractor for any build-up or wear. If needed, replace it with a new one.
  2. Check the ejector spring: If you suspect that the ejector spring may be weak or broken, have it replaced by a qualified gunsmith.
  3. Use proper sized ammunition: Always use the correct size ammunition for your firearm. Consult your rifle’s manual or a gunsmith if you are unsure.
  4. Keep your rifle properly lubricated: Regularly clean and lubricate your Springfield Hellion Rifle to ensure smooth operation.

5. Not Chambering Rounds

There could be several reasons why your Rifle is not chambering rounds correctly. Some of the most common causes include:

  • Dirty or damaged magazine: The magazine is an integral component of any firearm, and if it is dirty or damaged, it can cause feeding issues. Make sure to clean your magazine regularly and replace it if you notice any damage.
  • Improper ammunition selection: Using incorrect ammunition can also result in failure to chamber rounds. Always check the owner’s manual for the recommended ammunition for your Springfield Hellion Rifle.
  • Dirty or damaged chamber: If the chamber of your rifle is dirty or damaged, it can cause problems with feeding and extraction. Make sure to clean and inspect your chamber regularly.
  • Faulty extractor or ejector: The extractor and ejector are responsible for pulling the spent casing out of the chamber and ejecting it from the firearm. If either of these components is faulty, it can cause issues with chambering rounds.
  • Worn or damaged recoil spring: The recoil spring absorbs the force of the gun’s recoil and helps push the slide or bolt back into place. If this spring is worn or damaged, it can cause feeding issues.


If your Springfield Hellion Rifle is not chambering rounds properly, there are a few steps you can take to troubleshoot and fix the problem:

  1. Clean and inspect the magazine: As mentioned earlier, a dirty or damaged magazine can cause feeding issues. Disassemble your magazine and clean it thoroughly. Look for any signs of damage and replace it if necessary.
  2. Check your ammunition: Double-check that you are using the correct ammunition for your rifle. Using incorrect ammunition can cause significant issues and even damage the firearm.
  3. Clean and inspect the chamber: If your chamber is dirty or damaged, it can cause problems with feeding rounds. Use a cleaning rod and brush to clean the chamber thoroughly. Inspect it for any signs of damage and consult a gunsmith if necessary.
  4. Inspect the extractor and ejector: The extractor and ejector are essential components that can cause feeding issues if faulty. Make sure they are clean, properly lubricated, and free from any damage.
  5. Replace the recoil spring: If your recoil spring is worn or damaged, it can cause problems with the slide or bolt returning to its proper position. Replace the recoil spring if necessary.

6. Jamming Problems

Several factors can contribute to jamming in Hellion Rifles. These include:

  • Improper cleaning and maintenance: Failure to regularly clean and maintain your rifle can lead to a buildup of dirt, debris, and residue that can cause jamming.
  • Low-quality ammunition: Using low-quality or damaged ammunition can also increase the chances of jamming.
  • Faulty or worn-out parts: As with any mechanical device, worn-out or faulty parts can cause malfunctions and jamming.
  • User error: In some cases, jamming may be due to incorrect loading techniques or improper rifle handling.

Solutions for Jamming Problems

Fortunately, there are several steps you can take to prevent or resolve jamming issues with your Springfield Hellion Rifle.

  1. Regular Cleaning and Maintenance: To reduce the buildup of dirt, debris, and residue that can cause jamming, clean your rifle after each use. This includes wiping down the exterior and disassembling and cleaning the internal parts.
  2. Use High-Quality Ammunition: High-quality ammunition from reputable manufacturers can help prevent jamming. Avoid using old or damaged ammo, as well.
  3. Inspect and Replace Worn-Out Parts: Regularly inspect your rifle for any worn-out or damaged parts and replace them as needed. This can help prevent malfunctions that lead to jamming.
  4. Proper Loading Techniques: Make sure to follow proper loading techniques when using your Rifle. This includes checking the chamber before loading, inserting the magazine properly, and avoiding overloading.
  5. Seek Professional Assistance: If you continue to experience jamming issues despite taking these steps, it may be necessary to seek professional assistance from a gunsmith or Springfield Armory for further troubleshooting and repairs.

7. Trigger Pull Problems

A trigger pull problem occurs when the shooter experiences difficulty in pulling the trigger.

This could manifest as a stiff or heavy trigger pull, requiring significant force to discharge the rifle. This can lead to accuracy issues and overall frustration for the shooter.

There are several potential causes for trigger pull problems in the  Rifle. Some of the common ones include:

  • Dirt and debris buildup: Over time, dirt and debris can accumulate in the trigger mechanism, causing it to become stiff and difficult to pull. Regular cleaning and maintenance can prevent this issue.
  • Trigger spring fatigue: The Rifle’s trigger mechanism relies on a spring to reset after each shot. If this spring becomes worn out or damaged, it can cause the trigger pull to become heavy. In such cases, replacing the trigger spring is necessary.
  • Faulty trigger design: In some cases, the trigger may be poorly designed, leading to a heavy or stiff pull. This is more likely to occur in older rifle models, and upgrading to a newer trigger assembly can often solve the problem.

If you are experiencing trigger pull problems with your Rifle, it is essential to address the issue promptly. Ignoring the issue can not only affect your shooting accuracy but can also potentially lead to safety concerns.

Contact a certified gunsmith or the manufacturer for assistance in diagnosing and resolving the issue.

In addition to addressing any existing trigger pull problems, there are also steps you can take to prevent them from occurring in the first place.

8. Accuracy Problems 

Several factors can contribute to accuracy problems in Hellion Rifles. Some of the most common causes include:

  • Barrel Issues: The barrel is the most important part of a rifle, and any imperfections or damage to it can affect its accuracy. Over time, barrels can become worn out or corroded if not properly maintained.
  • Poor Ammunition Quality: Using low quality ammunition can lead to accuracy problems. Inconsistent bullet weight, powder charge, or casing length can all affect the trajectory of a bullet and cause it to miss its target.
  • Dirty Barrel: A dirty barrel can also impact the accuracy of a rifle. Firing multiple rounds without cleaning the barrel can cause buildup and affect the bullet’s path.
  • Scope Misalignment: If your rifle has a scope, it is important to ensure that it is properly aligned. A misaligned scope can cause shots to be off target.

Solutions to Improve Accuracy

Once you have identified the cause of the accuracy problem, there are several solutions you can try to improve your Springfield Hellion Rifle’s accuracy:

  • Inspect and Clean the Barrel: Regularly inspecting and cleaning the barrel can prevent buildup and maintain its accuracy. Use a bore guide and high-quality cleaning tools to clean the barrel properly.
  • Use High Quality Ammunition: Investing in high quality ammunition can make a significant difference in your rifle’s accuracy. Look for reputable brands and consistently use the same type of ammunition.
  • Realign or Upgrade Your Scope: If you suspect that your scope is causing accuracy problems, it may need to be realigned or upgraded. Seek the help of a professional gunsmith for proper installation.
  • Check the Stock: A loose or damaged stock can also affect the accuracy of your rifle. Make sure it is securely attached and in good condition.


Throughout this document, we have discussed several common issues faced by Springfield Hellion Rifles and provided solutions on how to fix them. It is important always to follow proper maintenance procedures and use high-quality ammunition to avoid these problems.

Furthermore, we have also highlighted the importance of safety when handling firearms. It is crucial to always adhere to safety protocols and properly store your rifle when not in use.

As responsible gun owners, we must take care of our firearms and ensure they are functioning properly.

By following the solutions provided in this document, you can keep your Springfield Hellion Rifle in top condition and enjoy its reliable performance for years to come.

Related Posts:

Savage MSR 15 Recon Problems

Kriss Vector Gen 2 Problems

Tavor X95 Problems

Diamondback AR-15 Problems

Ruger Sfar Problems

Ruger AR-556 MPR Problems

PSAK-47 GF3 Problems

Sig M400 Tread Problems