Springfield Prodigy Problems And Their Solutions

As a firearm enthusiast, the Springfield prodigy is definitely on your list of must-have guns. With its sleek design and reliable performance, it’s no wonder why this handgun has become so popular among shooters. However, like any other tool or equipment, problems may arise with the Springfield Prodigy that can hinder your shooting experience. But don’t worry, we’ve got you covered.

In this article, we’ll discuss the common issues faced by Springfield Prodigy owners and provide practical solutions to help you get back to shooting in no time.

Some of the most common issue related to Springfield Prodigy pistol include Failure To Feed, Failure To Extract, Magazine Issue, Jamming Problems, Recoil Spring Issue, 
Safety Issue and Accuracy Issue.

Quick Overview of Problems And Solutions

Problem Solution
Failure to Feed Use quality ammunition, Ensure clear chamber
Failure To Extract Clean and lubricate extractor, Replace worn-out extractor Spring
Magazine Issue Replace worn-out magazine parts, use recommended Mag
Jamming Problems Inspect ammunition for defects, Ensure proper lubrication
Recoil Spring Issue Replace worn-out recoil springs
Safety Issue Train on firearm handling and safety
Accuracy Issue Check and adjust sights, Seek professional accuracy tuning

Common Springfield Prodigy Problems And Their Solutions

1. Failure To Feed

First off, let’s start by understanding what exactly is meant by “failure to feed”. Simply put, it means that the gun is not picking up a new round from the magazine and chambering it into the firing position.

This can happen for a variety of reasons, but don’t worry, we’ll go through each possible cause and how to fix it.

Magazine Issues

The most common cause of failure to feed is an issue with the magazine. The first thing you should do is make sure your magazine is properly inserted and locked in place. If it is, then take a look at the feed lips (the part of the magazine that guides the bullets into the chamber).

Sometimes they can get bent or damaged, which can cause feeding issues. You can use a pair of pliers to carefully straighten out any bends or replace the magazine if necessary.

Dirty Gun

Another potential cause of failure to feed is a dirty gun. If your Springfield Prodigy hasn’t been cleaned in a while, it’s possible that dirt and debris have built up in the feeding mechanism, causing it to malfunction.

To fix this issue, you’ll need to give your gun a thorough cleaning. Check out our section on cleaning for tips on how to properly maintain your firearm.

Ammo Problems

Believe it or not, sometimes the problem isn’t with your gun at all – it’s actually the ammunition you’re using. Cheap or low-quality ammo can cause feeding issues, so make sure you are using high-quality, reliable ammunition.

If you’ve recently switched brands or types of ammo and started experiencing feeding problems, try switching back to your previous brand to see if that solves the issue.

2. Failure To Extract

This is a common issue that many gun owners may face, regardless of the type or quality of their firearm.

But why does this happen? There are several factors that may contribute to a failure to extract, including a dirty or fouled chamber, a weak or worn extractor spring, and issues with the extractor itself.

If you suspect that your chamber is dirty or fouled, please take a moment to clean it thoroughly. This may easily solve the problem and get your Prodigy back in action quickly. You may also consider using higher quality ammunition to prevent fouling in the future.

A weak or worn extractor spring may be the culprit if your Prodigy is having trouble extracting spent casings. In this case, replacing the spring with a new one may help improve performance.

Extractor issues can also cause failures to extract. Make sure to regularly check and clean your extractor for any build-up or damage. If you notice any problems, it’s best to contact Springfield or a professional gunsmith for assistance.

3. Magazine Issue

Another most common issues that owners face is with their magazine. When not properly maintained, a weak magazine spring and follower can cause major malfunctions which can be frustrating and even dangerous.

But don’t worry, we have some tips to help you troubleshoot these issues and get your firearm back on track.

Weak Magazine Spring

A weak magazine spring is a common issue that can occur over time. As the name suggests, it means that the spring in your magazine has lost its tension and is no longer able to properly feed rounds into your firearm. This can result in failure to feed or even worse, a jam.

To test if you have a weak magazine spring, you can simply load your magazine and observe if the rounds are sitting evenly. If they are not, then it’s likely that your spring needs to be replaced.

Magazine Follower Issues

The magazine follower is a small but important component of your firearm’s magazine. It is responsible for pushing the rounds up into position for feeding. However, if the follower becomes damaged or worn, it can cause feed issues.

To know if you have a magazine follower issue, load your magazine and observe if the rounds move freely. If they don’t, then your follower may be damaged or need to be replaced.

Fouled Magazine

A fouled magazine is when debris or residue builds up in the magazine causing feeding issues. This can happen over time with regular use or even during a shooting session. It’s important to always keep your magazines clean and free of any build-up.

To prevent this issue, be sure to regularly clean and inspect your magazines for any debris or residue. If you do encounter feeding issues, try cleaning the magazine first before assuming it is a more serious problem.

4. Jamming Problems

I know dealing with jamming can be super frustrating when using your Springfield Prodigy. But don’t stress, there are some easy solutions you can try if you run into this common problem.

First things first, make sure your magazine is seated right and locked in tight. An improperly installed mag is one of the biggest reasons for jams. Press it firmly into the mag well until you hear it click – that’s how you’ll know it’s truly locked.

Next up, check that your Prodigy is nice and lubed up. These guns really benefit from a smooth layer of oil on the slide rails and moving parts. This helps everything glide smoothly to prevent jams. Be generous with lube but avoid getting oil inside the firing pin channel.

You’ll also want to inspect your ammo closely. Rounds that are damaged or poor quality can cause feeding issues. Look for dents, crimps or other defects and toss any sketchy ones. Use fresh, factory ammo from good brands for the best performance.

Finally, pay attention to your grip. If your fingers are resting on the slide, it can’t move right and jams happen. Adjust your hold so your hand doesn’t touch the top moving portion. Keeping your wrists locked also prevents limp wristing issues.

5. Recoil Spring Issue

I know it can be really annoying when the recoil spring on your Prodigy starts to fail. But don’t stress, this is a pretty common problem with an easy fix.

The recoil spring returns the slide back into battery after each shot. When it starts to wear out after long steady use, it won’t push the slide hard enough. This can lead to failures to return to ready position.

If you’ve found your Prodigy isn’t fully returning while at the range or out hunting, the recoil spring needs replacing. This part does wear out over time with repeated firing.

Replacing the recoil spring on a Prodigy is simple and should only take a few minutes. Just lock the slide back, remove the takedown lever, and the slide comes right off. The spring is visible and can be swapped out for a fresh one.

Use only factory Springfield replacement springs to make sure the tension is right. After installing the new spring, reassemble the slide and you’ll be back in action with a reliably cycling firearm again.

6. Safety Issue

If you find that the safety lever on your Prodigy is not functioning properly or fails to put the gun in a ready to fire or safe position, stop using it immediately. Do not attempt to fix or modify the safety yourself.

The best course of action is to return the firearm to Springfield Armory for evaluation and repair. They have expert technicians that can properly diagnose and resolve any safety defects.

It’s still ok to transport the Prodigy to the dealer or gunsmith, just be sure it is unloaded with the magazine removed. Store it in a locked case for safekeeping until ready to be serviced.

7. Accuracy Issue

First, examine your shooting fundamentals. A proper grip, stance, sight alignment and trigger press go a long way towards accuracy. If needed, get some training to polish your technique. Even experienced shooters can benefit from brushing up on the basics.

Also inspect your ammo closely. Using quality factory loads that are clean, dry and undamaged can make a big difference in precision. Avoid cheap reloads or ammo that’s been exposed to moisture.

You may also want to try an array of ammo brands and bullet weights to see what your Prodigy prefers. Often, every gun shoots some loads better than others. Take notes to find the most accurate option.

Finally, adding a red dot sight or scope can really up your precision game. They make accurate shot placement much easier, especially for aging eyes. Mounting and sighting them in properly is key though.

3 Best Alternatives To Springfield Prodigy

Glock 19 Gen 5

This gun is a popular choice among competitive shooters and law enforcement personnel. Its compact size and lightweight design make it easy to carry, while its exceptional accuracy and fast firing rate make it suitable for any level of shooter. Not only that, but the Glock 19 Gen 5’s original design allows for customizable grip options, making it the perfect fit for any hand size.

Sig Sauer P320

The Sig Sauer P320 is known for its exceptional reliability and accuracy. Its modular design allows you to easily swap out parts to customize your gun, making it a solid choice for both beginners and experienced shooters alike. With a fast firing rate and real results on the range, the Sig Sauer P320 is a top contender for an alternative to the Springfield Prodigy.

Smith & Wesson M&P 9 Shield

Looking for something more compact and discreet? The Smith & Wesson M&P 9 Shield is a great option. Despite its smaller size, it still packs a punch with its fast firing rate and dependable accuracy. With a solid build and original design, this gun is a real competitor for the Springfield Prodigy.

Frequently Asked Questions(FAQs)

Is the Springfield Prodigy suitable for hunting?

Yes, the Springfield Prodigy is suitable for hunting due to its reliable performance and precision. However, it’s important to check local hunting regulations and laws before using it for hunting purposes.

What are the key features of the Springfield Prodigy?

The Springfield Prodigy features ambidextrous controls, a comfortable grip, adjustable sights, and a durable construction, making it a versatile and reliable firearm.

Can the Springfield Prodigy be disassembled for cleaning?

Yes, the Springfield Prodigy can be disassembled for cleaning and maintenance purposes. Refer to the user manual for detailed disassembly instructions and always follow proper safety protocols.

Is the Springfield Prodigy suitable for left-handed shooters?

Yes, the ambidextrous controls of the Springfield Prodigy make it suitable for left-handed shooters, providing flexibility and ease of use for individuals who prefer shooting with their left hand.

What is the price range of the Springfield Prodigy?

The price range of the Springfield Prodigy varies based on the model and any additional accessories included. The prices starting from $900 

How does the Springfield Prodigy perform in low-light conditions?

The Springfield Prodigy is equipped with adjustable sights and night sight compatibility, allowing it to perform well in low-light conditions. This feature enhances shooting accuracy in various lighting environments.

Can the Springfield Prodigy be used for competitive shooting events?

Yes, the Springfield Prodigy can be used for competitive shooting events due to its precision, reliability, and consistent performance, making it a preferred choice for enthusiasts and professionals in the shooting community.


I hope these tips help you diagnose and fix some of the more common problems that may come up with your Prodigy.

While malfunctions can be frustrating, a little inspection, maintenance, and troubleshooting often goes a long way. Most issues like jamming, recoil spring failures, or accuracy problems have straightforward solutions.

For more serious issues like safety or functional defects, sending it back to Springfield Armory for repair is your best bet. Their expert technicians can get your firearm back up and running reliably.

Related Posts:

Springfield Hellcat Problems

Springfield 911 380 Problems

Springfield Ronin Problems

Springfield XDM 10mm Problems

Springfield XDE Problems