Stevens 555 Problems And Their Solutions

If you own a Stevens 555 shotgun, you may have encountered some common issues while using it. But don’t worry, we are here to help.

In this guide, we will provide you with informative and authoritative solutions for the most common problems that Stevens 555 owners face.

Our goal is to make your experience with this firearm as smooth as possible by providing empathetic support and valuable information.

Some of the most common problems with Stevens 555 reported by the shooters are Double Firing Problems, Trigger Pull Issues, Failure To Eject, Stock Fit Issues, Hammer Spring Issues, Jamming Problems, and Firing Pin Problems.

Stevens 555 Problems


Common Stevens 555 Problems And Their Solutions

1. Double Firing Problem

The Double Firing Problem, also known as double feeds or simultaneous discharges, refers to a malfunction in shotguns where two rounds are fired at once instead of one.

This can be dangerous for the shooter and those around them, as well as cause damage to the firearm.

Main Causes for Double Firing Problem

There are several potential causes for the Double Firing Problem, including:

  • Faulty ammunition: Low-quality or damaged ammunition can cause inconsistent firing in shotguns. It is important to always use high-quality and properly stored ammunition.
  • Dirty or damaged gun parts: Accumulated debris, rust, or worn out components can disrupt the firing mechanism of shotguns, leading to double feeds. Regular cleaning and maintenance of the firearm is crucial to prevent this issue.
  • User error: Improper handling or loading of the shotgun can also result in double feeds. It is important to familiarize oneself with the specific steps for using a particular firearm, such as the Stevens 555, to avoid any mistakes.

How to Fix the Double Firing Problem

If you encounter the Double Firing Problem while using a shotgun, here are some steps you can take to fix it:

  1. Stop firing immediately and keep the gun pointed in a safe direction.
  2. Open the action of the shotgun to release any remaining rounds and clear the chamber.
  3. Inspect the ammunition for damage or defects, and discard if necessary.
  4. Thoroughly clean and inspect all gun parts, paying special attention to the firing mechanism. Replace any worn out or damaged components.
  5. Carefully load the shotgun according to the manufacturer’s instructions.

2. Trigger Pull Issue

There are several factors that can contribute to trigger pull issues, such as:

  • Dirty or worn-out trigger mechanism
  • Faulty or damaged trigger spring
  • Loose or misaligned trigger components
  • Improper lubrication or maintenance

How to Fix Trigger Pull Issue

If you’re experiencing a trigger pull issue with your shotgun, here are the steps you can take to fix it:

  1. Check and clean the trigger mechanism: Remove the trigger assembly from your shotgun and inspect for any dirt, debris, or wear on the components. Use a dry cloth or compressed air to remove any particles. If necessary, use a gun cleaner and lubricant specifically designed for shotguns.
  2. Replace the trigger spring: If the spring is damaged or worn out, it will need to be replaced. You can purchase a replacement from a gun store or online and follow the manufacturer’s instructions for installation.
  3. Adjust loose or misaligned components: Inspect the trigger housing and other parts for any looseness or misalignment. If necessary, tighten screws or adjust settings to ensure proper alignment and functioning.
  4. Properly lubricate the trigger mechanism: After cleaning and reassembling your shotgun, make sure to properly lubricate all moving parts with a gun oil for smooth operation of the trigger pull.

3. Failure To Eject

There are several factors that can contribute to FTE, including:

  • Dirty or worn ejector and extractor mechanisms
  • Faulty ammunition
  • Weak recoil spring or buffer system
  • Improper grip or shooting technique
  • Magazine issues, such as improper loading or worn springs

Identifying the root cause of FTE is crucial in order to effectively fix the issue and prevent it from happening in the future.

How can you fix this issue?

To fix FTE, follow these steps:

  1. Check the ejector and extractor mechanisms for dirt, debris, or wear. Clean and lubricate these parts as needed.
  2. Inspect your ammunition for any defects or damage that may cause FTE. If necessary, switch to a different brand of ammo.
  3. Check the recoil spring and buffer system for signs of wear or weakness. Replace these parts if needed.
  4. Practice proper grip and shooting techniques to ensure the firearm cycles smoothly.
  5. Inspect your magazines for any issues, such as improper loading or worn springs, and address them accordingly.

4. Stock Fit Issue

A stock fit issue refers to the way the stock, or the part of the gun that rests against your shoulder fits on your body.

A poor stock fit can result in improper gun mount, eye alignment, and overall discomfort while shooting.

This can ultimately lead to decreased accuracy and enjoyment during hunting or shooting sports.

What are the Main Causes of The Stock Fit Issue?

There can be several reasons why your Stevens 555 is not fitting you properly. Some common causes include:

  • Incorrect length of pull (distance from butt to trigger)
  • Ill-fitting comb (upper section of stock)
  • Uneven or misaligned recoil pad
  • Improper gun mount and shoulder position

How Can You Fix Stock Fit Issues?

Fixing a stock fit issue requires some patience and trial-and-error. Here are some step-by-step tips to help you get the perfect fit for your Stevens 555:

  1. Start by measuring your length of pull and considering your body proportions. A good rule of thumb is to have a length of pull that’s around 1 inch shorter than your arm span.
  2. Ensure the comb is at the right height for proper eye alignment, with the top edge of the comb in line with your dominant eye. If needed, adjust with spacers or a cheek riser.
  3. Check the recoil pad for any unevenness or misalignment. Sanding down the edges can help create a more comfortable fit.
  4. Practice proper gun mount and shoulder position. Make sure you’re holding the gun firmly against your shoulder and using consistent form each time you shoot.
  5. If you’re still experiencing issues, consider seeking professional help from a gunsmith or instructor who can assess and adjust your stock fit for optimal performance.

5. Hammer Spring Issue

The most common cause of hammer spring issues is wear and tear over time. Regular use of your shotgun can weaken the spring, causing it to lose its tension and become less effective.

Other causes may include improper maintenance, such as not cleaning or lubricating the spring regularly, damage from debris or corrosion, or even manufacturing defects.

How can you fix this issues explain in step by step

Fixing a hammer spring issue requires some basic knowledge and tools, but it can be done easily at home. Here’s a step-by-step guide to help you out:

  1. First, make sure your shotgun is unloaded and the safety is engaged.
  2. Disassemble your shotgun and locate the hammer spring.
  3. Inspect the spring for any signs of damage or corrosion.
  4. If there is debris or dirt present, clean it using a cloth and some gun cleaning solvent.
  5. Use a light lubricant to oil the spring and ensure smooth operation.
  6. If the spring is damaged or broken, you will need to replace it with a new one. You can find replacement springs at most gun stores or online retailers.

6. Jamming Problem

A jamming problem occurs when your shotgun fails to eject the spent cartridge casing or load a new one properly. This can happen for various reasons, which we’ll discuss next. But first, let’s understand why a jamming problem is a serious issue.

What Causes Jamming Problems?

There are several reasons that can cause a jamming problem with your shotgun. Some of the most common causes include:

  • Dirty or damaged ammunition
  • Improper lubrication of the shotgun mechanism
  • Incorrect loading technique
  • Faulty magazine spring or follower

How Can You Fix Jamming Problems?

Now that you know what a jamming problem is and its main causes, let’s see how you can fix it. Here are the steps you should follow:

  1. Clear the chamber and make sure the shotgun is unloaded.
  2. Inspect the ammunition for dirt or damage and replace if necessary.
  3. Clean and lubricate the shotgun mechanism according to the manufacturer’s instructions.
  4. Check your loading technique and make sure you’re doing it correctly.
  5. Inspect the magazine spring and follower for any damage or malfunctions.
  6. If all else fails, seek professional help from a gunsmith.

7. Firing Pin Problem

If your gun fails to fire when you pull the trigger, it could be due to a firing pin problem.

The firing pin is a small metal rod that strikes the primer of the cartridge, igniting the gunpowder and causing the bullet to fire.

If the firing pin is damaged or malfunctioning, it may not have enough force to properly strike the primer, resulting in a misfire or no fire at all.

This can be frustrating and even dangerous, especially in hunting or self-defense situations.

What are the Main Causes for Firing Pin Problem?

There are several reasons why a firing pin may not be functioning properly. Some of the main causes include:

  • Dirt or debris buildup: Over time, dirt, oil, and debris can accumulate in the firing pin channel, inhibiting its movement and causing it to malfunction.
  • Wear and tear: Just like any other mechanical part, a firing pin can wear out with repeated use. This is especially true for older guns or those that have been heavily used.
  • Rust or corrosion: If a gun is not properly cleaned and maintained, the firing pin can become corroded or rusted, making it difficult to function.
  • Improper installation: In some cases, a firing pin may be improperly installed during assembly or disassembly, causing it to malfunction.

How Can You Fix This Issue?

If you suspect that your gun has a firing pin problem, it is important to address it promptly and properly. Here are the steps you can follow:

  1. Before attempting any repairs, always make sure that the gun is unloaded and all ammunition is removed. Safety should always be the top priority when handling firearms.
  2. Disassemble the gun and remove the firing pin. This can usually be done with basic tools such as screwdrivers or pliers.
  3. Inspect the firing pin for any dirt, debris, rust, or wear and tear. Use a clean cloth or brush to remove any buildup or rust. If the firing pin is excessively worn or damaged, it may need to be replaced.
  4. Clean and lubricate the firing pin channel with an appropriate gun cleaner or oil. Make sure to remove any excess oil before reassembling.
  5. Reinsert the firing pin and test the gun by dry firing it. If it still has issues, you may need to seek professional help or consider replacing the firing pin altogether.

3 Best Alternatives To Stevens 555

1. Remington 870

The first alternative we recommend is the Remington 870. This pump-action shotgun has been a popular choice among hunters, sport shooters, and home defense enthusiasts for decades.

It offers a durable design, smooth action, and comes in various barrel lengths to suit your needs.

Additionally, the Remington 870 is widely available at an affordable price point, making it a great option for those on a budget.

2. Mossberg 500

Another popular alternative to Stevens 555 is the Mossberg 500.

This versatile shotgun comes with a wide range of features and options such as interchangeable barrels, adjustable stocks, and various chamber sizes.

It also boasts a reliable pump-action mechanism and is known for its durability, making it an excellent choice for both beginners and seasoned shooters alike.

3. Benelli Super Black Eagle II

For those willing to spend a bit more on a high-end, top-performing shotgun, the Benelli Super Black Eagle II is an excellent alternative to Stevens 555.

This semi-automatic shotgun offers fast and smooth operation, low recoil, and superior accuracy.

It also comes with various customizable features such as different stock options and barrel lengths.

While it may come at a higher price point, the Benelli Super Black Eagle II is considered one of the best shotguns on the market for its performance and reliability.

Frequently Asked Questions

Is the Stevens 555 a recent model?

Yes, the Stevens 555 is a relatively recent model.

Is the Savage Arms company known for producing high-quality firearms?

Yes, Savage Arms is known for producing high-quality firearms.

I want to buy a 20-gauge shotgun, is the Stevens 555 available in this caliber?

Yes, the Stevens 555 is available in 20-gauge.

Can I go hunting with the Stevens 555?

Yes, the Stevens 555 is suitable for hunting purposes.

How many rounds can the Stevens 555 hold?

The Stevens 555 can hold up to 5 rounds.

I’m looking for a lightweight shotgun, is the Stevens 555 a good option?

Yes, the Stevens 555 is relatively lightweight.

Can I use the Stevens 555 without any issues in both 28-gauge and 12-gauge?

Yes, the Stevens 555 is chambered for both 28-gauge and 12-gauge.

Related Posts:

Mossberg 835 Problems

Stoeger M3020 Problems

Mossberg 590s Problems

CZ 1012 Problems

CZ Teal Problems

Beretta a300 Outlander Problems

Beretta A300 Ultima Problems