CZ Teal Problems And Their Solutions

The CZ Teal shotgun is an exceptional firearm known for its high-quality construction and reliable performance.

With its sleek design and smooth operation, this shotgun is ideal for sports shooters and avid hunters looking to enhance their shooting experience.

While the CZ Teal is a highly dependable firearm, it’s not entirely immune to problems like all guns. In this article, we’ll explore some of the most common issues CZ Teal users may experience and provide solutions to help keep their firearms running smoothly.

Some common problems with CZ Teal include Opening Problems, Firing Pin Problems, Misfiring Issues, and Both Barrels Going off. Heavy Trigger, Jamming Problem, Double Fire. 

We’ll also discuss proper gun maintenance techniques and preventative measures that can be taken to extend the longevity of your CZ Teal shotgun.

CZ Teal Problems

Common CZ Teal Problems And Their Solutions

1. Opening Problems

Have you ever experienced opening problems with your shotgun as a hunter or shooter? Do you struggle with cartridge extraction or ejection? If so, then you are not alone.

Opening problems are a common issue that can affect any brand or model of shotgun.

Lack of lubrication is one of the most common causes of opening problems. Without proper lubrication, the parts of your shotgun can become stiff and difficult to move.

This can lead to cartridges getting stuck during the extraction or ejection process.

To fix this issue, you should apply a generous amount of lubricant to the moving parts of your shotgun. Be sure to use a high-quality lubricant that is specifically designed for firearms.

Improper assembly is another major cause of opening problems. If your shotgun is not assembled correctly, then it can lead to misalignment of parts and other issues.

To avoid this problem, you should carefully follow the manufacturer’s instructions when assembling your shotgun.

If you are unsure about any aspect of the assembly process, then you should consult an experienced gunsmith.

Inadequate ammunition can also cause opening problems in shotguns. Using low-quality or improperly sized ammunition can lead to misfires, jams, and other issues.

To avoid this problem, you should always use high-quality, properly sized ammunition that the manufacturer of your shotgun recommends.

Finally, the ejector is another potential cause of opening problems. If your shotgun’s extractor is worn or damaged, it can lead to cartridges getting stuck or failing to eject properly.

To fix this issue, replace the extractor with a new one compatible with your shotgun.

2. Firing Pin Problems

A firing pin is a crucial part of the firearm that strikes the cartridge’s primer, igniting the gunpowder and firing the shot.

When this component malfunctions, it can cause your gun not to fire, misfire, or fire inconsistently.

Now, let’s talk about the main causes for firing pin problems. Dirt and debris can easily accumulate in the firing pin channel, causing the firing pin to jam.

Corrosion can also cause the firing pin to weaken and fail over time.

A broken firing pin spring can cause the pin not to have enough tension, resulting in misfires. Lastly, manufacturing defects can also lead to firing pin issues.

So, how can you fix these issues? Here’s a step-by-step guide:

  1. First, disassemble your firearm and remove the firing pin.
  2. Clean the firing pin channel thoroughly with a brush and solvent, removing any dirt and debris.
  3. If there’s any corrosion on the firing pin, lightly sand it with fine-grit sandpaper to remove it.
  4. Check the firing pin spring for any damage or wear. If it’s broken, replace it with a new one.
  5. Reassemble and test-fire your firearm to ensure the firing pin is functioning properly.

3. Misfiring Issue

It can be frustrating when your firearm fails to perform as expected, especially when you are in the field or range. But worry not because various factors can cause misfiring and can often be resolved with proper maintenance and troubleshooting.

One of the main causes of misfiring is ammunition problems. This can include using the wrong type of ammo, using old or damaged rounds, or not loading the shotgun correctly.

To fix this issue, first, ensure that you are using the correct gauge and shot size for your CZ Teal shotgun.

Check your shell for any signs of damage or corrosion, and always store it in a cool, dry place to prevent degradation.

Additionally, ensure you are loading your shotgun properly according to your owner’s manual.

Another common cause of misfiring is firing pin issues. Over time, the firing pin can become worn or damaged, leading to misfires or failure to fire.

To address this issue, you may need to replace your firing pin or repair it by a qualified gunsmith.

Dirty or fouled internals can also lead to misfiring. If the shotgun has not been cleaned and maintained regularly, residue and debris can build up in the barrel, chamber, and action, causing malfunctions.

To fix this, disassemble your CZ Teal shotgun and thoroughly clean all the internal parts using a gun cleaning kit and solvent.

4. Both Barrels Go off

Double discharge mechanism malfunction, broken or damaged sear, and manufacturing defect are some of the primary causes that can result in Both Barrels Going off.

However, the good news is that you can fix these issues by following certain steps.

Firstly, if the cause of the issue is due to a malfunctioning double discharge mechanism, then it is recommended to contact the manufacturer or a qualified gunsmith for repair or replacement.

It is not recommended to attempt to fix this issue on your own.

Secondly, in the case of a broken or damaged sear, the sear will need to be replaced by a qualified gunsmith as well. Fixing this issue alone can be dangerous and may worsen the situation.

Lastly, if the reason behind the Both Barrels Go off is a manufacturing defect, then it is advised to contact the manufacturer and send back the gun.

Manufacturers usually have a warranty program and will either repair the shotgun or replace it with a new one.

5. Heavy Trigger

This can be a frustrating issue affecting your accuracy and overall shooting experience. Some users report the issue of hard trigger pull and they are frustrated with the issue.

One of the main causes of heavy trigger pull is a dirty or gunked-up trigger mechanism.

Over time, dust, grease, dirt, and debris can accumulate inside the trigger mechanism, causing a heavy and sticky pull.

Another cause for heavy triggers is due to worn-out trigger springs. The trigger springs can become worn out over prolonged use, leading to a heavier trigger pull.

The first step is to disassemble the trigger mechanism and clean it thoroughly to fix this issue. Use a soft-bristled brush and cleaning solvent (Eezox)to remove accumulated debris.

Once the trigger mechanism is clean, lubricate it with high-quality gun oil to ensure a smooth trigger pull.

These must be replaced if the heavy trigger pull is caused by worn-out trigger springs. Replacement trigger springs can be purchased from a gun store or online.

To replace the trigger springs, carefully disassemble the trigger mechanism and remove the old springs. Then, replace them with the new springs and reassemble the trigger mechanism.

6. Jamming Problem

Whether you use it for hunting or shooting sports, you know the frustration of experiencing a jamming problem. It can ruin your day and potentially be dangerous.

So, it’s important to understand the main causes of the issue and how to fix it.

A jamming problem occurs when the shotgun fails to cycle properly, leaving a spent shell stuck in the chamber or not feeding a new shell.

This can happen for several reasons, such as using low-quality ammunition, dirty or damaged gun parts, improper maintenance, or user error.

First, to fix the jamming problem, ensure that you are using high-quality ammunition appropriate for your shotgun.

Then, thoroughly clean and inspect all gun parts, especially the barrel, chamber, magazine, and action. Any debris or damage can cause jamming. Make sure that everything is well-lubricated.

If the issue persists, check the shotgun’s ejection and feeding systems. These mechanisms can become worn or damaged over time, leading to jamming.

You may need to take the shotgun to a gunsmith to repair or replace these critical components.

7. Double Fire

Many hunters complain about the issue of Double Fire when using  CZ Teal 20-gauge shotgun

This phenomenon occurs when the gun fires two rounds with just one trigger pull, which can significantly affect your accuracy and safety.

The main causes of Double Fire in shotguns can include worn sears or trigger components, improper installation or adjustment of the trigger mechanism, and damage to the firing pin or breach face.

These issues can result in a failure of the trigger to properly reset after firing, leading to a second shot being fired unintentionally.

To fix Double Fire issues, it is essential to carefully inspect and assess all parts of the trigger mechanism to determine the root cause of the issue.

First, ensure that the sears and trigger components are in good condition and properly lubricated.

If these components are worn or damaged, they should be replaced to ensure proper function.

Next, carefully check the installation and adjustment of the trigger mechanism. Any misalignment or improper adjustment can cause Double Fire issues to occur.

If necessary, seek professional gunsmithing services to ensure your shotgun’s trigger mechanism is installed and adjusted properly.

Finally, inspect the firing pin and breach face for any signs of damage or wear. These issues can also contribute to Double Fire problems. These parts should be replaced to ensure proper function if damage is present.

What Do The User Think About CZ Teal shotgun

After researching and analyzing the user feedback regarding the CZ Teal shotgun, it is fair to say that the response has been generally mixed.

Some users hold the CZ Teal shotgun in high regard because of its premium quality design and functionality, while others express concerns about the shotgun’s performance and value for money.

Those who have praised the CZ Teal shotgun have commended its beautiful design and craftsmanship.

They appreciate the exquisite engraving on the shotgun and are pleased with how the gun feels in their hands.

These users have also commended the shotgun’s reliability and ease of use, making it a popular choice for hunting and sporting enthusiasts.

On the other hand, some users have criticized the CZ Teal shotgun for a few reasons. Some were disappointed with the shotgun’s price, which they felt was not commensurate with its features.

Others noted issues with the gun’s accuracy and found it challenging to hit targets consistently, which may be a concern for experienced shooters.

There were also a few complaints about the shotgun’s weight, with some users finding it too heavy to carry for extended periods.

Overall, the CZ Teal shotgun receives a mixed response from its users.

While some users appreciate the firearm’s attention to detail and quality performance, some have issues with its accuracy and pricing, which may be limiting factors for those looking to purchase a shotgun.

Frequently Asked Questions

What is the gauge of CZ Teal? 

CZ Teal is available in both 12 and 20 gauges.

What is the length of the barrels on CZ Teal? 

CZ Teal has 28-inch barrels, perfect for hunting and clay shooting.

What is the choke system on CZ Teal? 

CZ Teal features the Invector-style choke system, which allows for easy swapping of choke tubes.

Does CZ Teal come with a warranty? 
Yes, CZ Teal comes with a limited lifetime warranty, ensuring quality and reliability.

What type of wood is used for CZ Teal’s stock? 

CZ Teal features a high-grade Turkish walnut stock, known for its beauty and durability.


We have listed the most common problems with CZ Teal shotgun and instructions on how to fix them.

If you still persist with issues, we recommend you take the help of a qualified gunsmith to overcome these issues.

Related Posts:

Remington V3 Problems

Beretta 1301 Problems

CZ Reaper Magnum Problems

Remington V3 Problems

Beretta a300 Outlander Problems

Beretta A400 Xplor Problems

Browning Gold Hunter Problems