Taurus 905 Problems and Their Solutions
Are you a Taurus 905 owner who’s been experiencing problems with your firearm? If so, you’re not alone.
Despite being a popular choice among gun enthusiasts, the Taurus 905 has been plagued with issues that can impact the firearm’s reliability and safety.
But don’t give up on your trusty sidearm just yet. In this blog post, we’ll explore the most common Taurus 905 problems and provide you with practical solutions to get your firearm back in working order.
Taurus 905 Problems and Their Solutions
Contents
So, let’s dive in and get your firearm back on target.
1. Moon Clip problem
Moon Clips are an essential tool for revolver enthusiasts as they help with the speed loading and unloading of rounds.
However, prolonged usage can lead to several issues that can affect the performance of the firearm. One of the most common problems associated with Moon Clips is the deformation of the clips.
This can occur due to various reasons such as improper handling or the use of low-quality Moon Clips.
When the Moon Clips become deformed, they can no longer hold the rounds securely, leading to difficulties while reloading.
To fix this issue, you will need to replace the deformed Moon Clips with new ones.
Firstly, you must make sure that you purchase high-quality Moon Clips that are compatible with your revolver’s make and model.
A good quality Moon Clip should be made of durable material, ideally stainless steel, that can withstand the impact of the rounds.
Once you have the new Moon Clips, you will need to remove the old deformed ones from the revolver.
This can be done easily by lifting the clip and pulling it upwards. You can use a Moon Clip removal tool to help ease the process.
After the old Moon Clips have been removed, it is time to insert the new ones. Carefully position the Moon Clip over the rounds and push it firmly into place.
Make sure that the clip is properly aligned with the cylinder of the revolver.
You can use a Moon Clip aligner tool to help you align the Moon Clip if needed. Once the Moon Clip is in place, check to confirm that it is holding the rounds snugly.
2. Failure To Eject
Failure to eject is a common problem that gun owners face, and it can occur due to various reasons.
In Taurus 905, failure to eject typically happens when the spent casing does not completely eject from the chamber after firing the gun.
There are several reasons why this may occur, such as a weakened extractor spring, a dirty chamber, or a faulty ejector.
To address this issue, gun owners must follow certain steps.
First, they need to ensure that the extractor spring is in good condition and properly installed. If the spring is worn out or broken, it needs to be replaced.
Second, the chamber must be thoroughly cleaned to ensure that it is free from any debris or residue that may inhibit the smooth ejection of the casing.
Third, gun owners need to inspect the ejector and ensure that it is not damaged or malfunctioning. If the ejector is not functioning properly, it needs to be replaced with a new one.
Once these steps have been taken, gun owners can test the gun by firing it to see if the failure to eject has been resolved.
If the problem persists, additional troubleshooting may be required, such as checking the magazine for any defects or replacing components in the gun that may be causing the issue.
It is important to note that failure to eject can not only affect the gun’s performance but can also be dangerous.
Therefore, gun owners must take prompt action to resolve this issue to ensure their safety and the safety of others around them.
3. Cylinder Problems
Are you experiencing cylinder problems with your Taurus 905? Cylinder problems can be frustrating, and if left unaddressed, they can result in severe damage to your firearm.
The cylinder is an integral part of the revolver that holds the cartridges, and it is responsible for properly aligning them with the barrel for firing.
Over time, however, the cylinder can become dirty, worn, and misaligned, resulting in jams, misfires, and difficulty turning the cylinder.
So, what are the main causes of cylinder problems, and how can you fix these issues step by step?
One of the primary causes of cylinder problems is the buildup of dirt, debris, and residue within the cylinder chambers.
This can occur from regular use or from poor maintenance practices, such as failing to clean the firearm after use.
As the buildup accumulates, it can impede the proper alignment of cartridges and cause them to misfire or fail to eject properly.
To fix this problem, you will need to remove the cylinder and clean it thoroughly using a combination of solvents, cleaning brushes, and lubricants.
This will help to remove any debris and buildup and ensure that the cylinder chambers are properly aligned.
Another common cause of cylinder problems is wear and tear on the cylinder itself.
Over time, the cylinder can become misaligned or suffer from issues such as cylinder wobble, resulting in difficulty turning the cylinder, misfires, and other problems.
To fix this issue, you may need to disassemble the revolver and inspect the cylinder for any signs of wear or deformation.
If you notice any issues, you may need to replace the cylinder or make adjustments to ensure proper alignment and function.
4. Failure To Fire
Perhaps you’ve tried everything you know, but still have not been able to enjoy a successful range trip. The good news is you’re not alone, and there’s still hope!
The leading cause of failure to fire is usually related to the ammunition you are using.
If you are using older ammo that has been sitting in your collection for a long period, the primer may have developed a film that can prevent it from igniting, leading to a failure to fire.
Additionally, if the primer is not set correctly in the cartridge, it may not ignite the gunpowder fully.
To fix this problem, we recommend using new ammunition from a reputable manufacturer.
If you are unable to get your hands on new ammunition, you can try cleaning the primer on the older cartridges with rubbing alcohol or a Brass wire brush.
This should help remove any film and debris that may block the primer from firing.
Another cause of failure to fire is a dirty or clogged barrel, preventing the bullet from coming out of the chamber.
To fix this issue, you can use a cleaning rod or a bore cleaner to scrub and remove the built-up gunk.
If you are still experiencing issues, it’s also essential to check your firing pin as it can also become dirty, ultimately leading to faulty ignition.
Clean the firing pin following the manufacturer’s guidelines.
Lastly, if you have tried all of the above solutions, we recommend checking the hammer spring tension.
This is one of the most common causes of firing failure, as a weak hammer spring will not provide enough force to ignite the primer.
To fix this issue, you may need to replace the spring or adjust the tension following the manufacturer’s instructions.
5. Cylinder Jamming
Cylinder jamming can be a frustrating problem that can make your firearm unreliable and unpredictable. The good news is that there are steps you can take to fix the problem and prevent it from happening again.
The main cause of cylinder jamming in the Taurus 905 is a buildup of fouling and debris in the cylinder or in the ejector rod housing.
Over time, powder residue, dust, and other debris can accumulate in these areas, causing the cylinder to become stuck or difficult to rotate.
Additionally, if the gun is not cleaned and maintained properly, the cylinder can become corroded or damaged, further exacerbating the problem.
To fix cylinder jamming issues with your Taurus 905 revolver, follow these steps:
- Safety first – always ensure your firearm is unloaded.
- Disassemble your revolver – carefully follow the manufacturer’s instructions to disassemble your firearm and remove the cylinder and the ejector rod housing.
- Inspect the cylinder and housing – check for any damage or corrosion. If there is any damage, it might be necessary to seek professional repair.
- Clean the cylinder and housing – using a cleaning solution and a soft brush, clean the cylinder thoroughly, paying special attention to the chambers and the ejector rod housing. Make sure you remove all fouling and debris.
- Lubricate moving parts – once the cylinder and ejector rod housing are completely clean and dry, apply lubricant to the moving parts according to the manufacturer’s instructions.
- Reassemble your revolver – carefully follow the manufacturer’s instructions to reassemble your firearm, making sure all parts are properly seated and secured.
- Test fire – before using your Taurus 905 for self-defense or at the range, test fire it to ensure that the cylinder is rotating smoothly and reliably.
If you continue to experience cylinder jamming after following these steps, seek the advice of a qualified gunsmith or contact the manufacturer for additional troubleshooting guidance.
By keeping your Taurus 905 revolver clean and well-maintained, you can prevent cylinder jamming issues and enjoy a reliable performance for years to come.
6. Trigger Problems
Trigger problems can be frustrating for any gun owner, but fortunately, most of these issues can be resolved with a little bit of knowledge and effort.
One of the most common causes of trigger problems is the trigger pull weight. If the pull weight is too heavy or too light, it can affect accuracy and performance.
To fix this issue, you’ll need to adjust the trigger pull weight by using a trigger spring kit. This kit will allow you to adjust the tension on the trigger, making it lighter or heavier as needed.
Another cause of trigger problems can be a damaged or worn trigger. If the trigger is damaged, it may not have enough tension to engage the hammer properly.
If the trigger is worn, it may not be able to engage the hammer at all. To fix this issue, you’ll need to replace the trigger with a new one. This will ensure that you have the tension and function you need for effective shooting.
Finally, trigger problems can also be caused by dirt and debris inside the trigger mechanism.
Dust, powder residue, and other debris can accumulate inside the trigger mechanism and affect the trigger’s function.
To fix this issue, you’ll need to disassemble and clean the trigger mechanism thoroughly. Use a soft cloth or brush to remove any dirt and debris that may be affecting the trigger’s function.
7. Hammer Problems
One common cause of hammer problems is a build-up of debris or fouling in the hammer channel. This can cause the hammer to stick or not function properly.
The first step in fixing this issue is to make sure your gun is unloaded and cleared of any ammunition. Then, remove the grips from your revolver to access the hammer channel.
Clean out any debris with a soft-bristled brush and a cleaning solvent.
Make sure the channel is completely clear before reassembling your gun.
Another possible cause of hammer issues is worn or damaged parts. Check your hammer, sear, and trigger components for any signs of wear or damage.
If any parts are worn, they may need to be replaced by a gunsmith. If you are comfortable with the gun repair, you can also order replacement parts and install them yourself.
Finally, improper maintenance or overuse can cause the hammer spring to weaken or break, which can cause hammer problems.
If you suspect that your hammer spring is the issue, you will need to replace it.
To do this, you will need to remove the grips again and take careful note of how your old hammer spring is installed before removing it.
Then, install the new spring in the same way.
Overall, hammer problems can be caused by a number of different issues, but most of them can be fixed with a thorough cleaning or parts replacement.
By taking care of your Taurus 905 and keeping up with regular maintenance, you can ensure that your revolver functions smoothly and accurately for years to come.
Frequently Asked Questions
Is a Taurus 905 a good revolver?
The Taurus 905 is generally considered to be a good revolver by many gun enthusiasts and professionals.
It is a compact and lightweight revolver chambered in 9mm, making it a versatile and practical choice for self-defense and concealed carry.
The revolver features a five-shot cylinder, comfortable grip, and smooth trigger pull, which are all desirable qualities in a defensive handgun.
Does the Taurus 905 require moon clips?
Yes, the Taurus 905 requires moon clips for proper function.
What is the trigger pull weight of a Taurus 905?
The trigger pull weight of a Taurus 905 is typically around 9-10 pounds.
Conclusion
The Taurus 905 is a popular handgun that has been praised for its accuracy, durability, and affordability.
However, like any firearm, it is not without its problems. In this blog post, we have discussed some of the most common issues that owners of the Taurus 905 may face, such as extraction failures, misfires, and feeding problems.
We have also provided some potential solutions to these problems, including cleaning the gun regularly, replacing worn-out parts, and using high-quality ammunition.
While these solutions can be effective in resolving issues, it is important to note that they may not work for everyone.
As firearm owners, it is our responsibility to not only maintain our guns properly but also understand its limitations, from their basic functions to their firing capacity.
This requires us to continually learn and educate ourselves on firearm safety, usage, and maintenance.
Moreover, it is crucial to recognize that no matter how many solutions we have at our disposal, there is always a risk of malfunction when we are dealing with a mechanical object as powerful as a handgun.
Therefore, the best way to prevent problems is by exercising caution and following proper safety measures.
Owning a Taurus 905 can be a rewarding experience if you take the time to learn about the firearm and equip yourself with the right knowledge and skills to handle any potential problems.
By staying informed, being responsible, and keeping safety as your top priority, you can enjoy your Taurus 905 with confidence and peace of mind.
Remember, firearms are not toys, and it is crucial to always treat them with the respect and care they deserve.
