The Taurus GX4 is a commonly used micro-compact handgun meant for concealed carry. It uses the 9mm caliber, a versatile and easily obtainable ammunition suitable for self-defense and target shooting.
It has a textured polymer grip with finger grooves and a beavertail extension for better control and recoil management, focusing on ergonomics.
But, as per our research, we have found that people are unhappy with this gun as it may cause frequent issues.
I will discuss the common issues in the Taurus GX4 in this article. Additionally, I will provide possible solutions for these issues.
Some common issues people experience with this gun are Failure To Eject, Failure To Feed, Jamming Problems, Delayed Firing, Trigger Pull Problems, Barrel Problems, Extractor Problems, Faulty Firing Pin, Slide Problems, and Sight Issues.
Common Taurus GX4 Problems And Their Solutions
- 1 Common Taurus GX4 Problems And Their Solutions
- 2 2. Failure To Feed
- 3 What Do The User Think About Taurus GX4
- 4 3 Best Alternatives To Taurus GX4
- 5 Frequently Asked Questions
- 6 Conclusion
1. Failure To Eject
As a proud firearm owner and enthusiast, I know the importance of proper firearm functionality and safety. One issue that can occur with firearms, including the Taurus GX4, is a failure to eject.
This can be a frustrating and potentially dangerous problem, but it can also be fixed with some troubleshooting and maintenance.
The most common causes of failure to eject include a dirty barrel, worn out extractor, or weak ammunition.
If you are experiencing this issue with your Taurus GX4, the first step is to clean your firearm thoroughly.
Remove the magazine and check the chamber to ensure the firearm is unloaded. Then, using a cleaning rod and solvent, clean out the barrel of any built-up residue.
Check the extractor for any signs of wear and replace it if necessary. Using high-quality ammunition that meets the manufacturer’s recommended standards is also important.
If cleaning and checking the extractor do not fix the issue, there may be a problem with the recoil spring. This can be replaced by a qualified gunsmith or by doing it yourself using manufacturer instructions.
Also, if the firearm has been fired extensively, you can see that there may be wear on the firing pin or other internal parts which require replacement.
2. Failure To Feed
Another common issue with any firearm is Failure To Feed, which occurs when the cartridge fails to enter the chamber, causing a malfunction during shooting properly.
Many people reported this issue but it is not an issue that take too much time to fix.
There are various causes for Failure To Feed, including improper loading technique, dirty or fouled magazines, weak ammunition, and even a dirty gun chamber.
But don’t worry if you encounter this problem as it is not uncommon and can be easily fixed with a few simple steps.
Firstly, check the loading technique. Load the cartridges into the magazine and follow the manufacturer’s instructions. This will ensure the cartridges are properly aligned in the magazine and ready to feed into the chamber.
Secondly, clean your magazine thoroughly. Remove any dirt, grease, or debris from the magazine and ensure the follower moves freely.
A dirty magazine can cause the cartridges to fail to feed properly because the follower cannot push the rounds up into the chamber.
Thirdly, try using different ammunition. Weak or improperly loaded cartridges can cause Failure To Feed. Ensure that you use high-quality ammunition and that the cartridges are clean and undamaged.
Lastly, you must check the gun chamber and clean it if necessary.
A dirty chamber can cause the cartridge to fail to properly enter the chamber and therefore cause a Failure To Feed malfunction.
3. Delayed Firing
I was disappointed when I first experienced the delayed firing problem with my Taurus GX4 gun.
I had high expectations for this firearm and didn’t want to give up on it yet. So, I researched and found that delayed firing is not an uncommon issue with new guns, and various factors can cause it.
One of the common causes of delayed firing is improper maintenance.
Guns need to be cleaned and lubricated regularly to function properly. If the gun is not cleaned properly, dirt and debris can build up in the trigger mechanism, causing delays in firing.
Another cause of delayed firing is faulty ammunition.
Cheap or old ammunition can cause misfires or delays in firing, especially if the primer is not seated properly.
After inspecting my Taurus GX4 gun, I realized that combining these factors caused the delayed firing problem.
The gun needed a thorough cleaning and lubrication, and the ammunition I was using was not of the best quality. Once I addressed these issues, the delayed firing problem was resolved, and the gun functioned perfectly.
If everything fails, I suggest you send the gun for warranty coverage to take the appropriate action.
4. Trigger Pull Problems
Many Taurus GX4 gun owners have reported on various forums that they have experienced issues with their gun’s trigger pull.
Some have reported that the trigger feels heavy and requires a lot of force to pull, while others have reported that it feels gritty or sticky, making it difficult to pull back smoothly.
One potential solution is to clean and lubricate your gun’s trigger mechanism. Over time, dirt and debris can accumulate in the trigger assembly, causing it to feel heavy or gritty.
By thoroughly cleaning and lubricating the trigger, you can help ensure it operates smoothly and reliably. Another option is replacing certain trigger mechanisms parts, such as the trigger return spring or sear.
These parts can wear out over time and cause issues with the trigger pull. I recommend replacing them with high-quality parts to improve your gun’s trigger pull and ensure it functions reliably.
If you’re uncomfortable performing these maintenance tasks yourself, taking your Taurus GX4 gun to a professional gunsmith for a thorough cleaning and inspection is always a good idea.
5. Barrel Problem
Most of the time, your gun fired inaccurately and the reason behind this is barrel probme.
This problem arises when the gun barrel becomes damaged or wears out, leading to accuracy issues and reduced performance. In more severe cases, the barrel may become completely unusable, rendering the gun unusable.
There are a few causes for the barrel problem in the Taurus GX4 gun. One of the most common reasons is improper cleaning and maintenance.
If the gun is not cleaned regularly or is not cleaned properly, dirt and debris can accumulate inside the barrel, leading to corrosion, rust, and erosion of the metal.
Another contributing factor can be the use of low-quality or incorrect ammunition.
If you are using such ammunition, then stop right now.
This can increase the wear and tear on the barrel, leading to faster degradation.
If you are experiencing a barrel problem with your Taurus GX4 gun, the good news is that it can be fixed. Here are the steps you should follow:
- Disassemble the gun carefully, following manufacturer instructions.
- Inspect the barrel for signs of damage, such as corrosion or pitting.
- Use a specialized tool or cleaning kit to clean the barrel thoroughly.
- Use a bore brush to remove any stubborn dirt or residue if necessary.
- Inspect the barrel again to ensure that all dirt and residue have been removed.
- If the barrel is still damaged, it may need to be replaced with a new one.
It is important to note that cleaning and maintaining your Taurus GX4 gun regularly can help prevent the barrel problem from happening in the first place.
Follow proper cleaning techniques and use high-quality ammunition to keep your gun in top condition.
6. Extractor Problem
Extractor problems are common is many firearms and in GX4 too.
The extractor is a small metal hook that removes spent cartridges from the gun chamber. When the extractor malfunctions, it can cause a variety of problems, including failure to eject spent cartridges, or even failure to load new rounds properly.
There are several potential causes for an extractor problem. One common cause is a build-up of debris or dirt that prevents the extractor from functioning properly.
Additionally, the extractor spring may become worn over time, which can cause it to lose tension and fail to function correctly.
Fortunately, fixing an extractor problem is a relatively straightforward process. First, ensure that the gun is unloaded and safe to work on.
Then, remove the slide from the gun and use a cleaning solvent to remove any dirt or debris inhibiting the extractor’s function.
Next, inspect the extractor and extractor spring for signs of wear or damage. If the extractor spring appears worn, it may need to be replaced.
To replace the extractor spring, first, remove the old spring from the extractor using a pair of pliers.
Then, please insert the new spring into the extractor and reattach it to the slide. If the extractor itself is damaged or worn, it may need to be replaced entirely.
7. Faulty Firing Pin
The causes of a faulty firing pin can vary, but most commonly, it is due to wear and tear over time.
The constant impact of the firing pin on the primer eventually causes it to become worn, leading to misfires and other issues.
Other causes can include a dirty or corroded firing pin channel, improper lubrication, and damage to the firing pin spring.
To fix the problem with the firing pin, first, clear the firearm of any ammunition and ensure that it is unloaded.
Next, disassemble the firearm according to the manufacturer’s instructions, and remove the slide. Locate the firing pin and inspect it for wear, damage, or other issues.
If it is worn or damaged, replace it with a new firing pin.
If the firing pin appears to be in good condition, inspect the firing pin channel for dirt or corrosion.
Use a cleaning tool and a solvent to clean out the channel thoroughly. Make sure to dry the channel completely before reassembling the firearm.
Next, check the firing pin spring for damage or wear. If it is damaged or worn, replace it with a new one. Lastly, lubricate the firing pin and the channel with the appropriate gun oil.
5. Slide Problems
Slide Problems can be a frustrating issue for Taurus GX4 Gun owners as it can affect the accuracy and reliability of the firearm.
The slide is an essential gun component that houses the firing mechanism and is responsible for loading and ejecting cartridges.
Due to the constant cycling of the slide, it is prone to wear and tear, resulting in slide problems.
The causes of slide problems can vary, but here are some of the most common ones:
1. Weak Magazine Springs – Weak magazine springs can cause failure to feed issues, resulting in the slide not moving forward all the way, or causing jams.
2. Dirty and Worn Out Extractor – A dirty or worn out extractor can cause rounds not to eject properly, leading to slide problems.
3. Malfunctioning Recoil Spring – The recoil spring is responsible for absorbing the gun’s recoil. If the recoil spring is worn or damaged, it can cause the slide not to function correctly.
4. Corroded Slide – Corrosion can cause the slide to stick and malfunction. This can occur when the gun is not properly maintained.
If you are experiencing slide problems with your Taurus GX4 Gun, you can follow these steps to fix the issue:
1. Check the Magazine Springs – If the magazine springs are weak, they need to be replaced. Make sure to use OEM magazine springs.
2. Clean or Replace the Extractor – If the extractor is dirty or worn out, clean it with a brush and solvent. If it’s damaged, it needs to be replaced.
3. Replace the Recoil Spring – If the recoil spring is worn or damaged, it needs to be replaced. Make sure to use a recoil spring that is compatible with your Taurus GX4 Gun.
4. Clean the Slide – If the slide is corroded, use a brass or copper brush to remove the corrosion. Make sure to use a lubricant to prevent future corrosion.
6. Sight Issue
Sight issue is a common problem that many gun owners encounter with their Taurus GX4. This issue can cause difficulties when aiming, resulting in missed shots and reduced accuracy.
There are several causes of sight issue, but most of them can be easily fixed.
One of the main causes of sight issue is misaligned sights. This could be due to the sights getting bumped or knocked out of place or a manufacturing defect.
To fix misaligned sights, check the alignment of the front and rear sights. If they are not in alignment, use a sight adjustment tool to adjust them until they are lined up properly.
Ensure that you follow the manufacturer’s instructions, as different guns may require different adjustment methods.
Another common cause of sight issue is an obstructed sight picture. This can happen if there is dirt or debris on the sights or if the position of their head blocks the shooter’s vision. To fix an obstructed sight picture, clean the sights with a soft cloth or a designated cleaner. If the shooter’s head position is the problem, consider adjusting the gun’s grip or changing the position of their shooting stance.
In some cases, sight issue may be caused by an improper grip or trigger pull. These issues can result in the gun slightly shifting as it is fired, which can throw off the aim.
To fix this problem, make sure that the shooter is using the proper grip and that they are properly pulling the trigger.
Consider taking a shooting class or working with an instructor to ensure that the shooter has proper form.
What Do The User Think About Taurus GX4
After conducting an extensive survey of Taurus GX4 users, it’s evident that there’s a mixed reaction towards this gun.
Some users appreciate its compact and lightweight design, making it easy to carry around. Additionally, the gun’s usability and reliability are also impressive.
However, some users encounter several issues. A few complaints centered on the gun’s failure to eject properly, which may cause potential jams.
Others noted that the trigger pull is a bit heavy, hindering their shooting accuracy.
Despite the mixed reviews, it’s worth acknowledging that it is an excellent option for concealed carry. Its compact nature and reliability make it a preferred choice for several gun enthusiasts.
Moreover, the gun’s price range is quite appealing, making it an affordable option for those seeking a reliable firearm.
3 Best Alternatives To Taurus GX4
If you are in the market for a new handgun and considering alternatives to the Taurus GX4, we have three recommendations: the Taurus Tracker 44 Magnum, the Taurus Curve, and the Taurus 692.
1. Taurus Tracker 44 Magnum
The Taurus Tracker 44 Magnum is a versatile revolver popular for hunting and self-defense. Its powerful caliber and 5-shot capacity makes it a reliable option for those who prioritize stopping power. Additionally, it has a comfortable grip and a sight radius that allows for quick target acquisition.
2. Taurus Curve
Another option is the Taurus Curve, a unique and compact option for concealed carry. Its curved design conforms to the body’s shape, making it extremely comfortable to carry for extended periods of time. It also features a light and laser combo, making it easy to aim in low-light situations.
3. Taurus 692
Lastly, the Taurus 692 is a new addition to Taurus’ revolver lineup, and has quickly become a popular option for those who enjoy the versatility of a 3-inch barrel revolver. It is chambered in both .38 Special and .357 Magnum, and features a 7-shot capacity. However, it has been noted that some users have experienced problems with the cylinder lock-up, which has caused some concern among users.
Overall, while the Taurus GX4 is a solid option for a 9mm striker-fired pistol, there are certainly alternatives on the market that may better suit your specific needs.
We hope that these recommendations have been helpful in your search for the perfect firearm.
Frequently Asked Questions
What is the price of the Taurus GX4?
According to the official website of Taurus, the price of the GX4 starts at $399.
What are the technical specifications of the Taurus GX4?
The Taurus GX4 is a compact 9mm pistol that measures 6 inches in length, 4 inches in height, and 1 inch in width. It has a 3.06-inch barrel and weighs 18.5 ounces unloaded. The GX4 has a polymer frame, a stainless steel slide, and a capacity of 11 rounds in the standard magazine.
Can I customize my Taurus GX4?
Yes, you can customize your Taurus GX4. Many aftermarket parts and accessories are available for this firearm, such as sights, grips, holsters, and magazine extensions.
What is the magazine capacity of the Taurus GX4?
The magazine capacity is 11 rounds of 9mm ammunition.
Is the Taurus GX4 easy to use and maintain?
Yes, it is designed to be user-friendly and easy to maintain.
What is the break-in period for the Taurus GX4?
The break-in period is typically 500 rounds.
I have created a list of potential problems Taurus GX4 users could face and shared it with the readers of this blog. Although the firearm is generally dependable, unforeseen malfunctions can still happen.
After long research and discussion on many forums, we have found that this handgun has received mixed reviews on blogs and forums, with a majority being positive.
So in case if you are dealing with such problems, please refer to my detailed instructions.
- Taurus 605 Poly Problems
- Taurus Tracker 44 Magnum