Taurus TX22 Problems And Their Solutions
The Taurus TX22 is a semi-automatic pistol that is designed for target shooting and plinking. It is chambered in .22 LR, which is a popular and inexpensive caliber that is widely available.
The pistol has a 16-round magazine, which allows for extended shooting sessions without needing to reload.
However, like any firearm, it is not without its issues. In this blog post, we will discuss some common problems that Taurus TX22 owners may encounter and provide potential solutions.
Small issues should not be ignored as they can escalate into more significant problems in the future. Fortunately, most of these issues can be resolved quickly and easily on your own.
Quick Overview of Problems And Solutions
Contents
| Problem | Solution |
|---|---|
| Failure To Feed | check the magazine and ammo, adjust the magazine spring |
| Failure to Eject | check the extractor and ejector, replace the extractor spring |
| Magazine Problems | replace the magazine spring or follower, or use higher-quality magazines. |
| Disassembly Problems | Try to replace the barrel if necessary. |
| Barrel Problems | 12-speed partially synchronized |
| Jamming Issues | inspect the barrel and slide for damage or debris, and replace any faulty parts. |
| Failure to go into the battery | Check for debris or obstructions in the slide, magazine, or barrel, clean and lubricate the gun, or replace any damaged or faulty parts. |
| Slide Locking Issues | clean and lubricate the gun, or replace the slide stop or slide lock lever if necessary. |
| Faulty Extractor | Inspect the extractor for damage or wear, clean and lubricate it properly, replace the extractor spring, or use higher-quality ammunition. |
| Charging amps: | 90 |
Common Taurus TX22 Problems and Their Solutions
Let’s quickly jump into in-depth solutions to the common problems that people experienced.
1. Failure To Feed
Failure to feed, or FTF, can be caused by various factors such as magazine issues, ammo issues, recoil spring issues, extractor issues, and barrel issues.
Let’s take a closer look at each factor and how to fix it step by step.
Magazine issues can be the root cause of FTF. The first step in troubleshooting is to check your magazine’s condition, which should be clean and free of any debris.
Check to ensure that the magazine is seated correctly in the gun and that the spring is functioning correctly.
If you notice any issues, try using a different magazine to see if that solves the problem.
Ammo issues can also cause FTF. Check the ammunition you are using to see if it is compatible with your Taurus TX22, and ensure that it is clean and in good condition.
Using low-quality or improperly sized ammunition can cause the gun to fail to feed reliably.
Try using a different brand of ammunition or ensuring that the ammunition you are using meets the specifications provided by the manufacturer.
Recoil spring issues may also be the root cause of FTF. If your recoil spring is worn or damaged, it may need to be replaced.
This can be done by a professional gunsmith or you can try replacing the spring yourself by following the manufacturer’s instructions.
Extractor issues can also cause FTF. Check the extractor to ensure that it is clean and in good condition.
If the extractor is damaged or not functioning correctly, it may need to be replaced by a professional gunsmith.
Finally, barrel issues can cause FTF. If the barrel is dirty or damaged, it can cause rounds to fail to feed properly.
Make sure to clean your barrel regularly and check for any signs of damage or wear. If the barrel is damaged, it should be replaced by a professional gunsmith.
2. Failure to Eject
Failure to eject occurs when an expended casing does not properly eject from the firearm, causing a malfunction.
There are several reasons why failure to eject can occur in the Taurus TX22. One common cause is that the firearm is dirty or not properly lubricated.
Another cause could be a weak or broken ejector. Additionally, using low-quality ammunition or ammunition that is not properly sized can also cause failure to eject.
To fix failure to eject, the first step is to thoroughly clean and lubricate the firearm.
This should be done regularly, especially after extended use. If cleaning and lubrication do not solve the issue, then the ejector may need to be replaced.
This can be done with the help of a gunsmith or by following the manufacturer’s instructions for replacement.
Another solution for failure to eject is to try using different types of ammunition. Make sure to use high-quality ammunition that is properly sized for the firearm.
This can help ensure proper ejection and prevent malfunctions.
3. Magazine Problems
After thorough research and analysis, we have found that magazine design flaws, quality control issues, user error, and the use of incompatible ammunition are the most common causes of magazine problems in the Taurus TX22.
Magazine design flaws can manifest in various ways, such as not allowing the rounds to properly feed into the chamber or failing to hold the magazine in place during use.
These types of flaws can be due to improper manufacturing techniques or sub-par materials used during production.
Quality control issues can also contribute to magazine problems, such as poor assembly or inspection processes that result in improperly functioning magazines.
This is a particularly pervasive problem in firearms manufacturing, as minor defects in critical components can result in significant issues down the line.
User error is another common cause of magazine problems in the Taurus TX22.
For example, users may unknowingly load the magazine incorrectly or fail to clear obstructions in the chamber before using.
This type of error can be easily avoided by following proper firearm safety and maintenance procedures.
Lastly, the use of incompatible ammunition can also lead to magazine problems. This is particularly true in the Taurus TX22, which has rather specific ammunition requirements.
Failure to use the correct ammunition can result in misfires, failure to feed, or even damage to the firearm itself.
To fix magazine problems in your Taurus TX22, start by checking the magazine for any obvious design flaws or defects.
If there are none, test the magazine with ammunition that is recommended by Taurus and ensure that it is loaded correctly. If you are still experiencing issues, you may want to contact Taurus customer support for further assistance.
4. Disassembly Problems
Perhaps you are encountering problems when trying to remove the slide or barrel.
Or maybe some parts are getting stuck during the disassembly process, making it a frustrating experience to clean and maintain your pistol.
Additionally, you may have trouble reassembling the pistol after cleaning, which can be a major issue.
Fortunately, most disassembly problems with the Taurus TX22 can be easily remedied with the right approach. Here are step-by-step guidelines to help you fix the problem.
1. Difficulty Removing the Slide
- Make sure your hands and the pistol’s surface are dry and clean.
- Pull the slide back and engage the slide stop.
- Press the takedown button so that it clicks, and then try to push the slide forward.
- If the slide is still difficult to remove, try using a non-marring tool to tap the backside of the slide.
- Avoid using excessive force as it may cause damage to the pistol.
2. Difficulty Removing the Barrel
- Look for the recoil spring guide assembly located at the front of the barrel.
- Push it slightly forward and then lift it to release the barrel from the slide.
- Take out the barrel and then remove the recoil spring guide assembly.
3. Parts Stuck During Disassembly
- Identify the specific parts that are stuck and their position
- Apply a few drops of gun lubricant around the affected area
- Wait for a few minutes and try again
- Avoid using excessive force as it may cause damage to the pistol
4. Difficulty Reassembling the Pistol After Cleaning
- Follow the reassembly instructions provided in your owner’s manual
- Ensure that all the components are properly aligned
- Check to see that the slide stop is aligned with the notches in the slide
- Avoid using excessive force when putting the parts back together
5. Barrel Problems
Some common causes of barrel problems in the Taurus TX22 include a misaligned barrel, barrel bulge, barrel obstruction, and poor accuracy.
Let’s take a closer look at each of these problems and how they can be fixed in a step-by-step process.
If you suspect that the barrel of your Taurus TX22 is misaligned, the first step is to disassemble the firearm and inspect the components.
Look for any signs of damage or wear and ensure that the barrel is properly seated in the slide.
If you notice any issues, it may be necessary to replace the barrel or seek professional gunsmithing services.
A barrel bulge is another potential cause of barrel problems in the Taurus TX22. This occurs when the pressure of the fired round causes the barrel to bulge outward.
In some cases, this can cause feeding or extraction issues. To fix a barrel bulge, you will need to have the barrel replaced by a gunsmith.
A barrel obstruction is another common cause of issues with the Taurus TX22. This can occur if debris or other foreign objects become lodged in the barrel.
To fix this issue, simply disassemble the firearm and remove any obstructions. It’s important to ensure that the barrel is clean and free from debris before reassembling the firearm.
Finally, poor accuracy can also be a symptom of barrel problems in the Taurus TX22.
This can be caused by any of the issues mentioned above, or may simply be due to wear and tear over time.
If you notice poor accuracy with your firearm, it may be necessary to replace the barrel or seek professional gunsmithing services.
6. Jamming Issues
This can be a frustrating experience for any firearm owner. However, it’s essential to identify the root cause of the problem to effectively fix it.
One of the main causes of jamming issues in the Taurus TX22 could be magazine issues.
This could include improper loading or damaged feed lips, which can lead to the failure of the firearm to feed ammunition properly.
Secondly, poor quality ammunition can also cause jamming, as it may not be compatible with the firearm.
Another factor that could contribute to jamming issues is a dirty or unclean firearm. Any carbon buildup or debris in the barrel or the gun’s internal parts could affect its proper functioning.
Lastly, defective parts such as a worn recoil spring or extractor can also be responsible for jamming issues.
Fixing jamming issues in Taurus TX22 is not too complicated, here’s how you can do it step by step:
- Clean the firearm thoroughly to remove any debris or carbon buildup from its internal parts, such as the barrel and other components.
- Ensure that the magazine is loaded correctly, and the feed lips are not damaged.
- Use high-quality ammunition that is compatible with the firearm.
- Replace any defective parts such as the recoil spring or extractor if necessary.
- Regularly maintain and clean the firearm to ensure proper functioning.
7. Non-Centered Barrel
A non-centered barrel refers to a condition where the bore axis of the barrel does not align with the centerline of the gun, resulting in the bullet not traveling straight out of the barrel.
This can cause inaccuracies and could be a potential safety issue.
Causes
The non-centered barrel can be caused by various reasons such as a manufacturing defect, improper installation, accidental damage, or normal wear and tear.
Some common culprits include a loose barrel nut or mounting screws, worn-out slide rails, or a misaligned barrel bushing.
How to Fix Non-Centered Barrel?
Fixing a non-centered barrel first requires determining the root cause of the issue. Then, you can follow these steps to align your barrel correctly:
Step 1: Unload and disassemble your firearm.
Step 2: Check the barrel, the locking block, and the slide for any visible damage, wear, or looseness.
Step 3: Tighten the barrel nut or mounting screws by using the appropriate tool as per the manufacturer’s instructions.
Step 4: Reassemble your firearm and re-check the bore alignment with a bore laser or other sight tool.
Step 5: If the non-centered barrel persists, seek professional assistance from a certified gunsmith.
8. Failure to go into Battery
Most of the users experience this problem so don’t worry about it.
Failure to go into battery happens when the slide of the pistol doesn’t fully close and lock into place, causing the trigger not to function properly.
This results in misfires, erratic cycling, and even dangerous situations that could result in injury.
The causes of failure to go into battery can vary and may include dirty or damaged parts, improper assembly, damaged ammunition, or weak springs.
The most common cause is an issue with the ammo — using old, corroded, or damaged rounds could prevent the slide from fully closing.
To fix failure to go into battery, start by disassembling and cleaning your firearm thoroughly, paying close attention to the barrel and slide.
If the issue persists, inspect the extractor to see if it’s bent or damaged, and if so, replace it.
Next, check the recoil spring for damage or weakening and replace it if necessary. Also, ensure that you’re using the appropriate ammo for your firearm.
8. Slide Locking Issues
Slide-locking issues occur when the slide lock lever fails to engage the notch on the slide, causing the slide to remain open even when there are rounds in the magazine.
This can be frustrating for any firearm owner, but fortunately, there are some causes and solutions to consider.
The most common causes of slide locking issues with the Taurus TX22 are related to the magazine and slide lock lever.
First, ensure that you are using the correct magazine that is designed for the Taurus TX22.
Using the wrong magazine can cause the cracked slide lock lever to fail and prevent the slide from locking.
Additionally, check the slide lock lever to see if it is functioning correctly. If the lever is loose or not engaging the notch properly, it may need to be adjusted or replaced.
To fix slide-locking issues with your Taurus TX22, follow these simple steps:
- Unload the firearm and remove the magazine.
- Clean the magazine and slide the lock lever to remove any debris or dirt that may be causing issues.
- Reassemble the firearm and test the slide lock lever to make sure it is working correctly.
- If the lever is still not engaging correctly, consider adjusting or replacing it.
- Re-insert the magazine and test the firearm to ensure that the slide properly locks open when the magazine is empty.
By following these steps, you can resolve slide locking issues with your Taurus TX22 and ensure that your firearm is functioning correctly
9. Faulty Extractor
A faulty extractor is a malfunction in the part of the firearm responsible for pulling spent casings from the chamber and ejecting them out of the gun.
When this part is not working correctly, rounds may fail to extract, causing jams and other malfunctions.
This can greatly impact the reliability and safety of your firearm.
The causes of a faulty extractor can vary, but they often stem from issues with the part itself.
Sometimes, the extractor may be damaged or worn out from use, hindering its ability to function properly.
Other times, debris or fouling may be causing interference or blockage in the extractor channel.
To fix a faulty extractor, the first step is to remove the slide from the frame and locate the extractor.
Carefully inspect it for any visible damage or signs of wear.
If the extractor is damaged or worn out, it will need to be replaced. You can purchase a new extractor from a reputable gun store or online retailer.
If your extractor appears to be in good condition, the issue may lie in debris or fouling buildup.
To clean the extractor, use a small brush and gun cleaning solvent to remove any buildup in the extractor channel.
Be sure to also clean the firing pin and other related parts to ensure the extractor can function properly.
Once the extractor has been inspected, cleaned, or replaced, reassemble your Taurus TX22 and test the functionality.
By taking these steps, you can have peace of mind knowing that your firearm will function reliably and safely for future use.
Taurus TX22 Features & Specifications
| Specification | Details |
|---|---|
| Caliber | .22 LR |
| Capacity | 16 rounds |
| Barrel Length | 4.1 inches |
| Overall Length | 7.06 inches |
| Height | 5.44 inches |
| Width | 1.25 inches |
| Trigger | Striker-fired |
| Safety Features | Manual safety, Trigger safety |
| Grips | Polymer |
| Slide Material | Stainless Steel |
What Do The Users Think About Taurus TX22
After conducting thorough research on online forums, gun enthusiast platforms, and customer reviews, it is evident that there is a diverse range of opinions on the Taurus TX22.
While some users uphold the pistol for its functionality, accuracy, and low recoil, others reported experiencing malfunctions and reliability issues.
The pistol has a polymer frame, adjustable rear sight, and an ergonomic grip. Additionally, it is chambered in .22 LR ammunition, making it a popular choice for target shooting and plinking.
Many users praised the ergonomic design and the easy-to-use sight system on the Taurus TX22.
The ergonomics provide a comfortable shooting experience, and the adjustable rear sight allows for precision accuracy.
Others found that the low recoil made it one of the easiest .22 pistols to shoot with.
However, there were consumers who complained about the reliability issues they faced.
Some users reported that the pistol could not feed particular types of ammunition, resulting in jams.
While some users encountered malfunctions that prevented them from using the pistol.
3 Best Alternative To Taurus TX2
When it comes to finding the perfect handgun, there are a multitude of options available on the market.
While the Taurus TX22 is a formidable choice, there are several alternatives that may be better suited to an individual’s needs and preferences.
Here are three best alternatives to the Taurus TX22 that we highly recommend:
1. Ruger SR22:
Considered one of the best .22 LR pistols on the market, the Ruger SR22 is a reliable and versatile alternative to the Taurus TX22.
This handgun has a sleek design and features an ergonomic grip, adjustable sights, and an easy-to-use slide stop.
With its affordable price tag and excellent performance, the Ruger SR22 is an excellent option for both novice and experienced gun owners alike.
2. Smith & Wesson M&P22 Compact:
If you’re looking for a compact and lightweight handgun, the Smith & Wesson M&P22 Compact may be just what you need.
This pistol has a polished stainless-steel slide and a polymer grip that provides a comfortable and secure hold.
Its small size makes it easy to conceal, while its ambidextrous safety provides added convenience and peace of mind.
Additionally, the M&P22 Compact boasts an impressive accuracy rate and is a great option for target practice or self-defense.
3. Walther P22Q: Similar to the Taurus TX22, the Walther P22Q is also a .22 LR rimfire semi-automatic pistol that has a lightweight and compact design.
This handgun is designed for easy handling and features a comfortable grip, ambidextrous controls, and low recoil.
Furthermore, the Walther P22Q has a customizable front sight and a Picatinny rail for mounting accessories such as lasers or flashlights.
If you’re looking for a versatile and reliable handgun for plinking or training, the Walther P22Q is certainly worth considering.
Frequently Asked Questions
What type of ammunition is compatible with the Taurus TX22?
It is designed to accommodate .22 LR caliber ammunition, which offers good accuracy, light recoil, and low noise.
Is the Taurus TX22 beginner-friendly?
Yes! It is designed specifically for beginners, with its intuitive controls, easy-to-clean design, and cost-effective pricing.
What is the barrel length of the Taurus TX22?
This gun features a 4.1-inch barrel, making it a perfect choice for target shooting and self-defense purposes.
What is the magazine capacity of the Taurus TX22?
It can hold up to 16 rounds in its magazine, offering an impressive amount of firepower in a compact package.
Is the Taurus TX22 reliable?
Yes! The Taurus TX22 is known for its high level of reliability, thanks to its rugged construction, durable materials, and careful attention to design.
8. What is the weight of the Taurus TX22?
The Taurus TX22 weighs in at just over 17 ounces, making it lightweight and easy to handle, while still offering excellent accuracy and control.
What is the trigger pull on the Taurus TX22?
This gun features a smooth and consistent trigger pull, measured at around 5 pounds, which offers excellent accuracy and control.
What types of sights are included with the Taurus TX22?
It comes with adjustable rear sights and a front sight, which are designed to offer maximum accuracy and precision, even in low-light conditions.
Conclusion
The Taurus TX22 has been touted as a great entry-level firearm for new shooters and a reliable choice for seasoned gun enthusiasts.
However, like any other product, it has its share of problems and solutions. In this blog post, we have explored some of the most common issues with the Taurus TX22 and provided effective solutions to address them.
While the solutions we offered are practical and effective, we need to remember that the overall safety and performance of the Taurus TX22 depend on the quality of care it receives.
Proper maintenance, regular cleaning, and thorough inspections are crucial to ensuring that our firearms function smoothly and safely.
It’s also important to invest in quality ammunition, as the type and quality of ammunition used can affect the wear and tear on a gun.
However, beyond the technical aspects of owning a Taurus TX22, we must also consider the broader societal context in which firearms exist.
Gun ownership is a highly politicized and divisive issue in many countries, with strong opinions and arguments on both sides of the debate.
As responsible gun owners, we should never lose sight of the fact that our firearms have the potential to inflict serious harm, and we must act with due diligence and responsibility.
Related Posts:
