Browning Maxus Problems And Their Solutions

Are you looking for solutions to the many problems associated with Browning Maxus shotguns? If so, then you’ve come to the right place. In this article, we’ll explore some of the most common issues and provide solutions that will help ensure your firearm operates reliably and safely.

Some common difficulties shooters face with Browing Maxus shotguns include Jamming, Feeding, Cycling Isssue, Gas Piston Breaking, Trigger, Recoil Spring, Barrel, and Firing Pin problems.

Browning Maxus Problems

We’ll also discuss how proper maintenance can prevent future problems from arising

Quick Overview of Browning Maxus Specs

Specification Details
Action Gas-operated autoloader
Gauge 12, 20 Gauge
Chamber Length 3″ (12-gauge), 3″ (20-gauge)
Barrel Length 26″, 28″, 30″
Stock Material Synthetic, Wood
Magazine Capacity 4+1, 3+1 (depending on shell size)
Sight System Fiber optic front sight, Invector-Plus choke system
Safety Safety

Common Browning Maxus Problems And Their Solutions

1. Jamming Problems

Jams can be a common problem with the Maxus shotgun. Fortunately, there are several steps you can take to troubleshoot and resolve jamming problems.

The first step is to ensure all shells in the magazine tube are properly aligned and seated in their respective chambers. If they are not aligned or seated properly could cause a jam.

Another step you can take is to ensure that the bolt has been properly locked into place and that it is not causing any obstruction when the action is cycled.

If the bolt becomes stuck in an open position, this could also cause a jamming issue.

Additionally, if there are any obstructions or debris inside of the chamber, these should be cleared away to ensure proper function

2. Feeding Problems

If you are getting frequent feeding issues with your shotgun, there may be a few potential solutions to try.

Firstly, ensure the chamber is empty and clean of any build-up or residue before loading any rounds.

Secondly, check that the magazine spring assembly is installed properly and in good condition.

Finally, ensure that the ammo being loaded is the type that is recommended for your Maxus.

Sometimes, a bent or broken extractor may be the root cause of feeding issues. This can easily be identified by visual inspection and replaced with an original part from Browning if necessary. Additionally, it’s important to ensure that all other parts of the action are properly maintained.

3. Cycling Isssue

This issue is when the gun cycles through more than one shell during a single pull of the trigger, resulting in two shots being fired simultaneously.

Various factors, such as improper maintenance and incorrect ammunition use can cause this problem. Certain steps should be taken to identify the cause of this Cycling Issue.

First, inspect the shotgun for any signs of damage or malfunction. The firing pin should be checked to ensure it is properly aligned and not damaged.

In addition, the ejector spring should be inspected for any potential issues that could result in a cycling issue.

Next, check the choke tube assembly to ensure it is installed and functioning correctly. If the choke tube assembly is not working properly, it can cause the cycling issue to occur.

Finally, check for any obstructions causing an irregular firing cycle. This includes checking for dirt or debris in the shotgun’s barrel and ensuring that the shells are correctly loaded into the firearm’s chamber.

4. Gas Piston Breaking

Gas piston breaking is one of the most common problems with your firearms. It occurs when the springs inside the piston become damaged and no longer function properly, resulting in a broken or jammed trigger mechanism.

This can cause unreliable operation and even be dangerous if left unchecked.

The best way to fix this issue is to replace the broken or worn springs with new ones. This is a relatively easy process and can be done quickly with the right tools and some basic gunsmithing knowledge.

It’s important to note that these springs are also subject to wear and tear over time, so regularly inspecting your firearm for any potential issues is important.

5. Trigger Problems

One of the most common problems owners of Maxus shotguns must face is trigger issues. Some of the more frequent triggers problems encountered include:

  1. Light primer strikes – This means that the firing pin does not hit the primer hard enough, causing it to fail to fire the round.
  2. Failure to reset – This can be caused by several problems such as a broken firing pin, a bent hammer spring, or even dirt or debris in the trigger group.
  3. Failure to fire – This can be caused by several issues, including an out-of-spec sear engagement, an improperly adjusted trigger stop screw, excessive creep, or even broken parts like pins and screws.

No matter the cause of your trigger problem, proper diagnosis and repair are essential to ensure you get the most out of your shotgun. If you encounter any trigger issues, always consult your owner’s manual or a qualified gunsmith to diagnose and repair the issue.

6. Recoil Spring Problems

The recoil spring, part of the Maxus’s gas-operated system, is a critical component that must be kept in proper working order.

Issues with the recoil spring can cause problems with cycling and extraction, such as failure to eject or extract spent shells or reloaded rounds. Sometimes, it can even lead to serious malfunctions like jamming or short-stroking.

When troubleshooting recoil spring problems, inspecting the recoil spring assembly for damage or wear is important. It should also be checked for proper installation and functioning correctly.

If necessary, the recoil spring should be replaced with a new one of the same specifications. Additionally, make sure that the gas plug and piston are clean and free of obstruction.

Another common issue is a worn or weak recoil spring, which can be caused by frequent use. If the spring has been weakened due to heavy use, it may need to be replaced with a stiffer one to cycle rounds and properly extract shells.

Finally, if you’re unable to resolve your recoil spring problems, it’s recommended that you take your firearm to a professional gunsmith for further inspection and repair.

7. Barrel Problems

The most common problem is the recoil spring assembly, which can become bent or twisted during firing. If this occurs, it can cause misfires and other performance issues.

To fix it, first, make sure the spring is not sticking out of the receiver. If it is, remove it and check for any bends or twists. If there are any, replace the spring assembly.

Another common barrel problem is chamber pressure. Too much or too little chamber pressure can cause misfires and inaccurate shots. To fix this issue, use your gun’s correct type of ammunition.

If you are still experiencing problems, try adjusting the pressure of your ammo by using a specific device designed for that purpose.

Lastly, it’s possible that a malfunction or damage to the barrel could be causing misfires and other issues. To check for this, inspect the interior of the barrel for any visible signs of wear or damage. If you find any, it’s best to take your gun to a professional gunsmith for further inspection.

8. Failure To Eject

 One of the most common problems with the Maxus shotgun is the failure to eject. This can be caused by a worn or damaged recoil tube and spring.

The recoil tube and spring play a critical role in cycling rounds through the firearm, so if they are not functioning properly, it can lead to failure to eject.

Fortunately, this is an easy problem to fix. All you need to do is replace the recoil tube and spring with new ones. This can be done relatively easily, but if you are unsure how to proceed, a qualified gunsmith or armorer should have no trouble helping you out.

9. Firing Pin Issue

The Maxus is a popular hunting shotgun, and an issue that some users have reported is the Firing Pin issue. As the name implies, this problem occurs when firing pins on your gun become jammed due to dirt or debris getting stuck in them.

This can be especially problematic for those who use their gun for hunting, as it may prevent them from firing their weapon.

First, disassemble the gun and remove any dirt or debris stuck in the firing pins. You should then check that all of the screws in the trigger assembly are securely tightened, as a loose screw can cause the firing pin to become jammed.

Once you have done this, reassemble the gun and see that it is properly lubricated before using it.

You should check to see if the bolt fully locks into the battery. If not, return the weapon to Browning.

3 Best Alternative Guns of Browning Maxus

Browning Maxus is a great gun and has been a popular choice for those looking to buy an auto-loader. But if you’re looking for something different, here are our top three alternatives:

Benelli M2

The Benelli M2 is a semi-auto shotgun that features the renowned Inertia Driven system for reliable and fast cycling. It is easy to maintain with its simple design, making it a great choice for novice and experienced gun owners alike.

Beretta A400

The Beretta A400 is an excellent autoloader that has been designed for reliability and speed. Its patented Blink gas-operated system ensures quick cycling of shots, while the removable trigger group makes it a breeze to clean and maintain.

Stoeger M3500

The Stoeger M3500 is a great choice for an affordable yet reliable autoloader. Its comfortable recoil pad reduces kickback from shots, while its rotating bolt head provides smooth cycling of shells.

The Stoeger M3500 is a great choice for those looking for an alternative to the Browning Maxus.

Frequently Asked Questions

What should I do if my Browning Maxus is ejecting shells inconsistently?

The ejection port or spring may be dirty or in need of lubrication. Cleaning or lubricating these components may help resolve the issue.

My Browning Maxus is having problems with the stock. What can I do?

If you are experiencing issues with the stock, such as it being loose or not fitting properly, it is recommended to consult with a Browning authorized service center or contact customer service.

Is it normal for the Browning Maxus to have a slow cycle with light loads?

Yes, it is common to have a slower cycle with lighter loads. This safety feature is designed to ensure proper function and prevent any issues.

What should I do if my Browning Maxus is not ejecting spent shells?

You can thoroughly clean it, focusing on the ejection port and return spring. Additionally, ensuring proper lubrication may help resolve the issue.

My Browning Maxus won’t cycle properly after being exposed to water. What should I do?

It is recommended to thoroughly clean and ensure all components are dry. If the issue persists, it is advised to seek assistance from a Browning-authorized service center or contact customer service.

What should I do if my Browning Maxus is cycling slowly?

There could be some dirt or gunk in the action. Disassemble the gun and thoroughly clean all parts, paying special attention to the piston spring and lubrication.

Why won’t Maxus eject high brass shells?

If your Browning Maxus won’t eject high brass shells, it could be due to a weak return spring or a dirty or gunked-up action. Try thoroughly cleaning the gun and ensuring the return spring is functioning properly.


If you plan on hunting, the Maxus rifle is a decent option. However, when it comes to shooting, most experienced shooters at NSCA events tend to prefer Berettas over the Maxus. If the Maxus fits your specific needs, it could still be a worthwhile investment.

Related Posts:

Browning 2000 Problems

Browning Citori 725 Problems

Browning Gold Hunter Problems

Common Remington V3 Problems

LYNX 12 Shotgun Problems

Stoeger M3500 Problems

Stoeger M3000 Problems