Panzer Arms BP-12 is a popular semi-automatic shotgun manufactured by Panzer Arms in Turkey. It has gained much popularity among hunters, recreational shooters, and even law enforcement due to its reliability and affordability.
Despite this, some users may encounter issues when using the firearm. This article will discuss some of the most common Panzer Arms BP-12 Problems and their solutions.
Some of the most common problems with this shotgun include Feeding Problems, Reliability Issues, Firing Pin Issues, Barrel and Choke Problems, Cycle Issues and Cracking Issues.
Common Panzer Arms BP-12 Problems And Their Solutions
1. Feeding Problem
It is not uncommon for a Panzer Arms BP-12 shotgun to experience a feeding problem at some point in its lifetime.
Dirty or corroded magazines usually cause this issue: improperly sized ammunition, weak magazine springs, or faulty extractors/ejectors.
To fix this issue, the first step should be thoroughly cleaning and inspect the shotgun’s bore, chamber, and magazines. If possible, try to replace any damaged or worn out components.
It is also important to ensure that only ammunition of the correct size and type for your specific model is used in the shotgun.
Make sure all rounds are properly seated in the magazine and feed smoothly. In addition, check if the magazine springs are weak or damaged, and replace if necessary.
Finally, inspect the extractors/ejectors for any signs of wear or damage. The extractors should be cleaned regularly and lubricated with oil at least once every few months to ensure proper functioning.
If the extractor is beyond repair, it may need to be replaced with a new one.
2. Reliability Issue
The reliability issue with the Panzer Arms BP-12 is one of the most commonly discussed problems.
This issue usually occurs when a user experiences difficulty firing rounds due to misfiring or jammed cartridges.
It can be caused by several different factors, such as an oversized shell casing, improper lubrication of internal parts, or a damaged or worn recoil spring assembly.
In order to address these reliability issues, it is important to ensure that your BP-12 is properly serviced and maintained.
This includes regularly cleaning and lubricating the internal components, inspecting shells for defects, and replacing any worn or damaged parts.
Also, regular recoil spring assembly maintenance can help improve its performance and reduce misfiring or jamming issues.
It is also recommended to ensure that the action’s firing pin and other parts are properly maintained, as any damage or wear can affect how reliably the BP-12 functions.
Finally, ensuring that only properly sized shells are used is essential for achieving reliable performance from your Panzer Arms shotgun.
3. Firing Pin Issue
The Firing Pin issue can be caused due to a variety of reasons. The most common cause is the firing pin not contacting the primer, resulting in misfires or failure to fire altogether.
Other causes could include poor spring tension, excessive firing pin protrusion, improper gas block adjustment, and inadequate lubrication.
It would be best to start by checking the gas block for proper adjustment. If it is not properly adjusted, the bolt carrier group may cycle too quickly to allow sufficient time for the firing pin to contact the primer.
It is also important to ensure that your firing pin has adequate spring tension and a consistent protrusion from its housing.
If the protrusion is inconsistent, it may cause misfires or failure to fire altogether.
4. Barrel and Choke Problems
Another most common issues that can arise is problems with its barrel and choke. The barrel can become clogged with oil or dirt over time, causing a decrease in shooting accuracy.
Additionally, improper maintenance may not tighten the choke properly or be damaged.
To fix the issue, ensure all parts are clean and debris-free. This includes not just the inside of the barrel but also the outside of it – any dirt or grime that has built up can affect your accuracy.
Also, check that the choke is functioning properly and is tightened securely. If there are any problems with either of these components, it may be worth replacing them to ensure shooting accuracy.
Finally, make sure to use quality ammunition in the BP-12 – using low-grade or damaged ammo can also hurt its performance.
5. Cycle Issue
Cycle issues with the Panzer Arms BP-12 can usually be traced back to one of three root causes: faulty parts, improper assembly, or inadequate lubrication.
In any case, these problems are fixable and even preventable if you take the right steps.
A faulty part is sometimes blamed for a cycle issue with the Panzer Arms BP-12. It is important to ensure that any parts, such as springs or pins, are in good condition and not damaged.
If a part is in poor condition, it should be replaced with an OEM replacement part for optimal performance.
The Panzer Arms BP-12 is a complex firearm, and even the slightest misalignment in assembly can lead to cycle issues.
To ensure proper operation of the BP-12, it’s important that you properly assemble all components per factory specifications.
Lubrication is essential for your Panzer Arms BP-12 to operate correctly. If the gun is not properly lubricated, it can cause cycle issues and even jamming.
To ensure optimal performance of your BP-12, make sure to check and apply proper lubrication as needed regularly.
One of the most common problems that users of the Panzer Arms BP-12 encounter is “cracking.”
This term is used to refer to a variety of issues with this shotgun, including cracking near or around the receiver.
The causes of this cracking can be varied and complex. However, some of the most likely sources include poor manufacturing techniques or material choices, excessive pressure from the firing mechanism, and/or excessive temperature exposure.
If your BP-12 is experiencing cracking issues, addressing them as soon as possible is important.
Depending on the severity of the problem, you may be able to make minor repairs yourself with some basic tools and parts.
However, if the damage is more extensive, contact a qualified gunsmith or take your firearm to an authorized Panzer Arms service center for professional repair.
Finally, it’s important to note that the cracking issue is often caused by using higher pressure/hotter magnum loads in the BP-12 than what is recommended.
Only use the ammunition specified in your owner’s manual to avoid this issue.
3 Best Alternatives To Panzer Arms BP-12
The Kel-Tec KSG is a great pump action shotgun that offers comparable performance to the Panzer Arms BP-12. It has an 18.5″ barrel with a 3″ chamber and can hold up to 8 rounds in its twin tube magazine.
It also comes with adjustable sights and a Picatinny rail for mounting accessories.
Mossberg 590 Shockwave
The Mossberg 590 Shockwave is a great option if you’re looking for a compact, lightweight shotgun.
Its 14-inch barrel and overall length of just 26.5 inches make it one of the most maneuverable firearms available today. It also features an ambidextrous safety and plenty of room for customization.
The Remington 870 is a classic pump action shotgun since 1951. It comes in several different models and is one of the most reliable guns on the market. The 870 also features a smooth operating action and an adjustable stock, making it comfortable to shoot regardless of size or shape.
Frequently Asked Questions
How do I disassemble the Panzer Arms BP-12 shotgun?
First, to disassemble the Panzer Arms BP-12 shotgun, ensure that it is unloaded. Then, remove the magazine and unscrew the barrel from the receiver.
From there, you can disassemble the shotgun into its various components for cleaning and maintenance.
What should I do if the Arms BP-12 shotgun handguard is loose?
You can try tightening the retaining screws.
Why the bolt Release is not working?
If the bolt release on your Panzer Arms BP-12 shotgun does not work, you should first ensure the shotgun is unloaded. Then, check for any obstructions or debris that may prevent the bolt release from functioning properly.
Can the Panzer Arms BP-12 shotgun carry more than five rounds?
No, the shotgun is designed only to carry a maximum of five rounds.