Smith And Wesson EZ 9mm Problems And Their Solutions

The S&W EZ 9mm is a popular compact handgun choice for many gun owners. It is reliable, lightweight, and easy to carry.

Unfortunately, some issues may arise with its use that require knowledge of the correct solutions.

In this article we will look at some of the common Smith and Wesson EZ 9mm problems and their solutions so that you can continue to enjoy your gun without any issues.

We will go over things such as when to replace parts, what to do if the firing pin does not work correctly, and how to troubleshoot some common problems with this gun.

Smith And Wesson EZ 9mm Problems

Common Smith And Wesson EZ 9mm Problems And Their Solutions

1. Failure To Feed/

One common issue with S&W EZ 9mm handguns is feeding problems. This can be caused by improper loading technique, poor ammunition quality, or gun damage. Fortunately, there are solutions to get your pistol back up and running.

Improper loading technique, especially with a magazine, is a frequent cause. Ensure you push rounds down firmly and evenly for proper seating.

Poor ammunition quality can also lead to failure to feed. Always use good quality ammo with your EZ 9mm pistol.

If you suspect a physical issue with the gun, like a broken spring or faulty magazine, consult a professional gunsmith for diagnosis and repair.

2. Hard to Move the Magazine

If you’re having trouble reloading magazines with your Smith & Wesson EZ 9mm pistol, there are a few potential causes and solutions.

The most common issue is an incorrect fit between the gun and magazine. The magazine won’t slide smoothly into place if it’s too loose. To fix this, try using a magazine that fits better.

Another problem may be a weak or broken magazine spring. This part pushes the rounds up when loading a new magazine. If it’s not working properly, you can replace the spring yourself.

Dirty or debris-filled magazines can also cause difficulties. Clean your magazine using approved gun cleaning solutions. If there’s a lot of debris, consider disassembling it for a thorough cleaning.

Lastly, worn or damaged magazine slots can hinder loading. Contact Smith & Wesson for a replacement part and professional installation.

3. Rear Sight Issues

The Smith and Wesson EZ 9mm has several rear sight issues that can hinder accuracy and performance. Most notably, this pistol does not have an adjustable rear sight, making it difficult to hit targets at different distances precisely.

If you are experiencing poor accuracy or difficulty in sighting your gun correctly, there are a few things you can do to improve the accuracy of your pistol.

First, ensure the barrel is properly aligned with the rear sight. This can be done by checking the alignment with a bore sighting device or taking it to a gunsmith for professional assistance.

If the barrel and rear sight are not aligned correctly, your shots may fly off target, even if you think you are aiming accurately.

Second, you can add an adjustable rear sight to your pistol. This is a relatively simple process that requires no tools or special knowledge.

Just replace the existing rear sight with an adjustable one, and follow the manufacturer’s instructions for installing and adjusting the new sight. This will give you more precise control over where your shots go and how far they travel.

Finally, you may want to consider upgrading the sights on your pistol. Aftermarket sights with improved features, such as tritium night sights or fiber optic front and rear sight systems, are available.

These can help you get even more precise shots from your Smith and Wesson EZ 9mm.

4. Faulty Grip Safety

The Smith & Wesson EZ 9mm Pistol features a unique safety called the “Faulty Grip Safety”. This safety prevents accidental misfires by requiring the shooter to firmly grip the gun and squeeze downwards on the grip to release the trigger. It should be checked before each use to ensure the safety is engaged.

Confirm the gun is unloaded, then pull back on the slide and press down on the grip. If there is no resistance or trigger release, the safety needs to be re-engaged.

Regularly cleaning and maintaining the firearm is also important to keep it safe and free from debris.

5. Trigger Jamming Issue

If you have noticed that your EZ 9mm pistol’s trigger is jamming occasionally, don’t fret! This common issue can be easily resolved with a few simple steps.

First, inspect the firing pin block and ensure that is in its proper position. If the block has become misaligned or jammed, it will cause the trigger to become stuck occasionally. Lock the slide back and pull the trigger to check for this. If the firing pin block moves forward, it’s in its correct position.

If it does not move or appears stuck, you’ll want to run a few tests on your pistol to ensure that none of its components need replacing.

Place the gun on a flat surface and hold the trigger firmly for thirty seconds or more while gently shaking it from side to side.

 If it loosens up, then your problem is most likely solved, however, if not, you’ll want to replace any worn-out parts that may be causing your issue.

Finally, ensure that the hammer spring is in proper working order, as this will ensure the trigger can function correctly.

6. Tight Slide

Shooting a M&P EZ 9mm pistol can become problematic when the slide gets stuck and won’t move. This is due to dirt or debris that has built up in the area between the barrel and the slide.

The best way to fix this issue is by using the slide stop as a slide release.

To do this, place your finger on the side of the slide stop, press it down and hold it. To do this, you need to keep a firm grip on the pistol so that it won’t move when you are doing this.

Once you have done that, use your other hand to pull back on the slide until it is completely open.

Afterward, carefully release the slide stop and let go of the pistol. This should help clear out any dirt or debris that has built up in the area, allowing your pistol to work properly. Contact a professional or local gunsmith if this does not solve the issue.

The EZ 9mm can also be problematic if its slide is too tight due to either a manufacturing defect or incorrect assembly.

You can either professionally clean and lubricate the pistol or adjust the slide stop’s tension to solve this issue.

To adjust the slide stop’s tension, use a thin screwdriver to turn the set screws on the sides of the slide until it is tightened just enough for your needs.

Remember to ensure each screw is tightened evenly so there won’t be any unintended pressure on one side of the slide.

7. Ammo Problems

Another common problem associated with the EZ 9mm is ammo-related. Sometimes, despite using the correct type of ammunition, you may still experience some misfires and jams throughout your shooting session.

When this happens, there are a few things to check that could be causing the issue. First and foremost, make sure the ammo you are using is up to standard and not out of date. If it is, then replace it with some fresh rounds.

It’s also important to check that your gun is clean and well-maintained. Ensure the barrel isn’t blocked or clogged up, as this will affect how smoothly the round feeds into the chamber.

Finally, make sure the trigger and firing pin are properly lubricated. Use quality gun oil to ensure reliable shooting operation if it’s dry.

3 Best Alternatives To Smith & Wesson EZ 9mm

As you may already know, Smith & Wesson’s EZ 9mm is a reliable and popular choice for handguns. But what if you’re looking for a few other alternatives as well? Here are three of the best handguns to consider that offer similar features and benefits:

Glock 34 – This semi-automatic pistol is known for its precision and accuracy due to its longer barrel length and adjustable sights. It also features a light trigger pull and manual or automatic safety option.

Sig Sauer P226X5 – This handgun has a full-sized frame and slide designed for accuracy and fast target acquisition. It comes standard with three magazines, an adjustable rear sight, an ergonomic grip, and a rail for mounting accessories.

Browning Hi-Power 9mm – This classic handgun is made with quality materials and has proven reliable over time. It features a single-action trigger, manual safety, and adjustable sights. Additionally, its comfortable grip makes it easy to handle.

Frequently Asked Questions (FAQs)

What should I do if the Smith And Wesson EZ 9mm trigger gets jammed?

If the Smith And Wesson EZ 9mm trigger gets jammed, you should stop using the gun immediately and take it to a qualified gunsmith for repair.

Why is using the Smith And Wesson EZ 9mm uncomfortable?

Using the Smith And Wesson EZ 9mm may be uncomfortable due to the grip safety on the gun’s beaver tail. Some users find it difficult to fully engage the grip safety, resulting in discomfort during usage.

Can I use a magazine loader with the Smith And Wesson EZ 9mm?

Yes, you can use a magazine loader to help load rounds into the Smith And Wesson EZ 9mm magazine. One popular option is the Uplula magazine loader.

Why is the rear sight of my Smith And Wesson EZ 9mm faulty?

A: If the rear sight of your Smith And Wesson EZ 9mm is faulty, it may have been damaged or misaligned. Taking the gun to a qualified gunsmith for inspection and repair is recommended.

Related Posts:

Smith And Wesson M&P 10mm Problems

Smith And Wesson 460 XVR Problems

Smith And Wesson Governor Problems

Smith and Wesson CSX Problems

Smith And Wesson SD9VE Problems

Smith and Wesson 22a Problems

Kahr PM40 Problems

Sig P365 Xl Problems