Remington 1187 Problems And Their Solutions
The Remington 1187 shotgun is a popular choice for wing and clay shooters due to its rugged build quality, reliability and affordable price point. However, even one of the most dependable firearms can occasionally experience issues that affect performance or usability.
As an avid shooter myself, I’ve put hundreds of rounds through my own 1187 over the past decade and have encountered a few minor problems along the way.
In this post, I’ll share the most common complaints I’ve seen about the 1187 model and provide solutions based on both my own experiences addressing issues as well as input from other experienced shooters in the know.
My hope is that by highlighting these potential problems and remedies, it will help fellow gun enthusiasts optimize their 1187 shotguns and continue enjoying many more productive afternoons on the range or in the field.
Some of the most common problems with Remington 1187 are Cycling Problem, Ejecting Shell Problem, Firing Problems, Jamming Issue, Reliability Issues, Barrel Problem, Issue with the Link and Shell injection problem.
Common Remington 1187 Problems And Their Solutions
Contents
1. Cycling Problem
If you own a Remington 1187 shotgun, you may have encountered a cycling problem with your firearm. This can be caused by a variety of factors, such as a dirty gas system, worn-out parts, or a misaligned barrel extension.
The good news is that there are solutions to this issue, depending on the root cause. One potential solution is to give the gas system a thorough cleaning with a specialized spray, like WD-40 or CLP.
Alternatively, you may need to replace worn parts or consult a professional gunsmith for more intensive repairs.
Whatever the case, it’s important to address cycling problems with your Remington 1187 promptly to maintain the safety and reliability of your firearm.
2. Ejecting Shell Problem
Another most common 1187 problem with this gun is the failure to eject or feed shells properly. This can cause frustration and inconvenience for any shooter.
If you’re experiencing this issue, there are several things you can do to diagnose and solve the problem.
First, inspect the barrel for any obstructions or debris that may be blocking the shell from ejecting properly.
Clean the barrel thoroughly and try again. If this doesn’t work, you may need to seek the assistance of a local gunsmith, who can help diagnose and fix the issue.
Ejecting shell problems can be frustrating, but with a little patience and some troubleshooting, you can get your gun functioning smoothly and reliably once again.
3. Firing Problems
Have you ever experienced firing problems with your Remington 11-87? It can be frustrating and even dangerous if not handled properly.
One common issue is when your shotgun fails to fire. This may occur due to a shell in the magazine that isn’t feeding correctly.
To avoid this problem, make sure to properly load your magazine with shells that are the correct length and gauge.
Additionally, another frequent problem is when your shotgun produces a weak or muffled sound when firing.
This can happen when the barrel isn’t fully tightened or when the ammunition used isn’t the right caliber for your firearm.
The solution? Always double-check your barrel and use compatible ammo to avoid any mishaps.
Remember, if you’re ever unsure about the cause of any Remington 1187 problems, it’s best to send it back to Remington for repair or replacement. It’s essential to ensure safe and reliable shooting for a better experience overall.
4. Jamming Issue
Are you experiencing jamming issues with your Remington 1187 shotgun? This can be frustrating and prevent you from having smooth shooting experiences. One solution is to check the shell insertion to ensure it is being done correctly.
Additionally, the feed latch can become worn over time, so it’s important to replace it to prevent further issues.
Making these small adjustments can make a big difference in the performance of your gun. In addition, it’s important to keep it well lubricated with oil or lube to prevent future problems.
With these tips, you can enjoy a smoother shooting experience with your Remington 1187.
5. Shell injection Problem
Shell injection is a common problem in Remington 1187 shotguns, but it can be easily prevented and resolved.
This issue occurs when the shells are not fully inserted into the gun’s chamber, causing them to get stuck or misaligned. This can happen due to various reasons such as improper loading technique, damaged or dirty shells, or a malfunctioning shell lifter.
Solutions for Shell Injection
The good news is that there are simple solutions for the shell injection problem with your Remington 1187 shotgun. The first step is to ensure that you are properly loading the shells into the chamber.
Make sure to push them all the way in until you hear a click, indicating that they are securely in place.
Next, check the condition of your shells. If they are dirty or damaged, they may not fit properly and cause shell injection. Cleaning and inspecting your shells regularly can prevent this issue from occurring.
If the above solutions do not work, then it is possible that your shell lifter may be malfunctioning. In this case, it is best to take your shotgun to a qualified gunsmith for repairs or replacements.
6. Reliability Issues
One of the main causes of these reliability issues is often a dirty or worn out follower. The follower is responsible for pushing the shells up into the magazine tube and if it becomes dirty or worn out, it may not be able to perform its job effectively.
To address this issue, it is important to regularly clean and maintain the follower of your Remington 1187.
Simply remove the magazine cap, spring, and follower from the magazine tube and clean them thoroughly with a gun cleaning solvent. Ensure that all debris and residue are removed before reassembling.
Another potential cause for reliability issues in the Remington 1187 is a dirty trigger assembly. This component is responsible for firing the gun and if it becomes clogged with dirt or debris, it may not function properly.
To clean the trigger assembly, you will need to remove it from the stock of your gun Carefully disassemble the parts and use a gun cleaning solvent to clean each component thoroughly.
Once cleaned, reassemble the trigger assembly and test the firearm’s reliability.
If cleaning your follower and trigger assembly do not solve the reliability issues with your gun, it may be time to consider replacing these parts with new ones.
7. Barrel Problem
The main thing you’ll want to check is the action spring inside the barrel. This important spring is what pushes the bolt forward after each shot to eject the empty shell and load a new one. Over time and heavy use, the spring can get worn out or damaged.
To check it, you’ll need to field strip the shotgun to access the barrel interior. Take a close look at the action spring – are there any cracks or deformation that could be weakening it? If so, replacing it with a new Remington factory spring should get your 1187 running smoothly again.
If the spring visually looks okay, try a deep clean of the entire barrel and action area. Use a quality gun solvent and brush to scrub away any built up residue or gunk inside. This prevents anything from interfering with the spring mechanism.
Once the barrel is squeaky clean, reassemble your 1187 and test it unloaded with some dummy rounds. Work that action and see if the fresh spring is now able to forcefully push the bolt forward to eject properly.
If after inspecting the spring and thorough cleaning, it still has issues, then it’s probably time to let the Remington experts take a look.
8. Issue With The Link
The link is what connects the forend to the bolt and allows you to slide the forend back and forth to operate the action. It has to slide along rails inside the receiver.
If those rails become worn or burred over time, it can cause the link to bind up and not move freely. This can lead to pump and feeding issues.
First, you’ll want to remove the barrel and forend to inspect the link and rails inside the receiver.
Check for any obvious burrs, pits, or scratches on the surfaces. If you see any damage, try gently smoothing it out with some fine grit sandpaper or a file. Go slowly and carefully to avoid removing too much material.
If the rails are really chewed up, you may need to look into replacing the link itself. These are available as replacement parts from Remington. A gunsmith can also probably install a new link and fit it to the receiver rails properly.
Frequently Asked Questions(FAQs)
How can I troubleshoot the issue of the second shell not picking up in my Remington 11-87?
If the second shell is not picking up, you can first check for any debris or dried grease inside the receiver that may be causing the issue. Additionally, inspect the interceptor latch for wear and consider cleaning and lubricating the component.
If the problem persists, it is advisable to seek the assistance of a professional gunsmith or contact Remington for further support.
What should I do if the interceptor latch on my shotgun appears to be loose?
If the interceptor latch on your Remington 11-87 feels loose or shows signs of wear, it is recommended to have it inspected by a professional gunsmith.
Replacing the worn or damaged latch with a new one from trusted suppliers such as Brownells can often provide a reliable solution to this issue.
Are there any specific maintenance tasks I should perform to prevent issues with my Remington 1187?
Regular maintenance tasks for the 11-87 may include cleaning and lubricating critical components, inspecting the gas system for any signs of debris or wear, and ensuring proper function of the action spring and related parts.
Additionally, it’s important to follow the manufacturer’s recommendations for maintenance and storage.
Conclusion
You have reached the end of this guide on solving common problems with the Remington 1187 shotgun. We hope that you found this information useful and it helped you improve your hunting experience.
Remember to always follow proper maintenance procedures and handle your shotgun with care. With regular cleaning and maintenance, you can avoid most of the issues discussed in this guide.
We understand that dealing with problems while hunting can be frustrating, but don’t let it spoil your experience. Stay calm and use the troubleshooting tips provided in this guide to quickly solve any issues you may encounter.
Related Posts:
