Ruger EC9s Problems And Their Solutions

Are you a proud owner of the Ruger EC9s? If so, then this article is for you! Despite being known as one of the most reliable handguns on the market, Ruger EC9s may still experience some common problems.

But fret not because we have provided solutions to these issues. In this guide, we will delve into the common problems faced by Ruger EC9s owners and provide helpful tips on resolving them.

So, let’s not waste any more time and jump right into it!

Some of the most common problems with Ruger EC9s include Failure To Eject, Failure To Feed, Magazine Release Problems, Trigger Issues, Slide Stuck Problems, Accuracy Issues, and Problems with Safety Lever and Stovepiping.

Ruger EC9s Problems



Common Ruger EC9s Problems And Their Solutions

1. Failure To Eject

There are several main causes for failure to eject in handguns, including improper lubrication, worn out extractors, weak ejector spring, and low-quality ammunition. The lack of proper maintenance can also lead to this issue.

To fix this problem, there are several steps you can take.

Firstly, make sure your gun is properly lubricated. Apply a thin coat of lubricant to the slide rails, barrel, and other moving parts of the gun.

Secondly, check the extractor to see if it’s worn out. If it is, replace it with a new one.

Thirdly, check the ejector spring to see if it’s weak. If it is, replace it with a stronger one. Lastly, consider using high-quality ammunition as it is less likely to cause failures.

2. Failure To Feed

It’s a common issue that many gun owners face, and several factors, such as improper cleaning, incorrect ammunition usage, or a faulty magazine can cause it. Now, let’s dive deeper into what exactly is Failure To Feed (FTF).

FTF is when the firearm fails to properly load the next round into the chamber, resulting in a misfire or stoppage.

This can be a dangerous situation, as it can affect the functionality of the firearm and hinder your ability to use it in self-defense situations.

The main causes for FTF can vary, but some of the most common ones include magazine issues, incorrect ammo, improper lubrication, or a dirty chamber.

These issues can be easily identifiable and fixed with proper maintenance and attention to detail.

First of all, inspect the magazine and make sure it’s clean and properly loaded with ammunition.

Then, check the ammunition and ensure it is of the correct caliber and free from any damage or defects.

Clean and lubricate your firearm properly according to the manufacturer’s instructions.

If the issue still persists, seek the advice of a professional gunsmith who can diagnose and fix the problem for you.

3. Magazine Release Problems

Magazine release problems can occur for several reasons, such as faulty buttons or worn-out springs.

Another reason could be a buildup of dirt or debris within the magazine release mechanism, which can lead to the magazine being released accidentally.

Fortunately, fixing magazine release problems is not as difficult as it may seem. Here are some simple steps to help you solve this issue:

Step 1: Clear the Magazine Release Mechanism

The first step is to clear any dirt, debris, or other foreign materials in the magazine release mechanism. You can do this using a brush, compressed air, or a small gun-cleaning solvent.

Step 2: Check the Release Button

The next step is to inspect the magazine release button. Ensure that the button has not become too loose or too tight. Test the button to make sure that it is releasing the magazine appropriately.

Step 3: Check the Spring Tension

Check the spring tension in the magazine release mechanism. If the spring is worn out or too loose, it can cause problems with releasing the magazine. If the spring is damaged or worn out, consider replacing it with a new one.

Step 4: Seek Professional Help

If you’re unsure of how to fix the issue, seek professional gunsmith help. They will inspect and diagnose the problem and suggest the most suitable solution.

4. Trigger Issue

The trigger is the most important part of a handgun as it controls the firing mechanism. When a trigger issue arises, it can impact your shooting accuracy, and in some instances, it can even lead to accidental discharges.

There can be various causes behind trigger issues, but the most common ones are dirt and debris buildup, weak springs, faulty trigger safety, and improper installation.

When debris builds up inside the trigger, it can prevent the smooth movement of the trigger, leading to a stiff and hard-to-pull trigger.

Weak trigger springs can also be an issue as it may not be strong enough to reset the trigger after pulling.

Meanwhile, a faulty trigger safety or improper installation can result in a trigger that doesn’t function properly or a trigger that discharges accidentally.

Fortunately, there are steps you can take to fix the trigger issues on your handgun. First, you need to disassemble the trigger mechanism and clean it thoroughly.

Use a soft-bristled brush and gun-cleaning solvent to remove any dirt or debris obstructing the trigger. Inspect the trigger safety for any visible defects and replace it if necessary.

You may also need to replace the trigger springs if they are weak or damaged.

Next, reassemble and test the trigger mechanism to ensure it functions smoothly and properly.

You can also consult with a professional gunsmith or call Ruger if you are not comfortable disassembling and cleaning the trigger mechanism yourself.

Remember, regular maintenance and cleaning of your gun’s trigger can prevent trigger issues from arising in the future and ensure that your handgun functions optimally for years to come.

5. Slide Lock Stuck

This issue can happen and it may differ from person to person. Slide lock stuck means that the slide catch or lock cannot be released, preventing you from reloading your firearm. It’s a frustrating problem, but thankfully there are solutions.

The main causes for slide lock stuck can be due to different factors, such as a damaged slide catch or lock, debris build-up, or simply a need for lubrication.

Another reason could be that the slide lock is moved too far up or down, which can cause a malfunction.

These problems can all lead to the slide lock being stuck in place and preventing the firearm from functioning properly.

If you encounter this issue, there are specific steps you can take to fix it. The first step is to remove your magazine from the gun and ensure no ammo or bullets in the chamber.

Next, look closer at the slide catch or lock to see if there is any damage or debris build-up. If this is the case, you can gently use a cleaning brush to remove the debris until it is clean.

If the slide lock is moved too far up or down, you can move it back to its proper position, located in the center of the slot.

You may need to apply pressure to the slide catch or lock so that it returns to its original position. If this doesn’t work, you may need to consider lubricating your firearm with gun oil, which can help prevent future issues.

6. Accuracy Issue

One of the primary causes of Ruger EC9s accuracy issues is the trigger pull weight. The heavy trigger pull weight of the Ruger EC9s can cause the shooter to anticipate the shot, which can throw off their accuracy.

Another factor is the lack of consistent trigger travel, which can make it difficult for the shooter to predict when the gun will fire.

Fortunately, several ways exist to fix accuracy issues with the Ruger EC9s. One of the easiest solutions is to use a lighter trigger pull weight.

You can achieve this by installing an aftermarket trigger kit or by having a gunsmith adjust the trigger pull weight. A lighter trigger pull weight can help reduce the shooter’s anticipation and improve accuracy.

Another solution is to adjust the trigger travel. This can be done by a gunsmith who can modify the trigger assembly to ensure that the trigger has a consistent travel each time it is pulled.

This modification can help the shooter predict when the gun will fire, improving accuracy.

In addition to modifying the trigger, several other factors can contribute to accuracy issues, including the sight alignment and grip.

Ensuring that the sights are properly aligned and the grip is comfortable can also help improve accuracy.

7. Problem with Safety Lever

Have you ever experienced problems with the safety lever of your Ruger EC9s pistol? If so, you’re not alone.

Many gun owners have reported issues with this component, which can create a serious safety hazard if not addressed properly.

One of the main causes of problems with the safety lever is inadequate lubrication. Over time, dirt and debris can accumulate within the mechanism, causing it to become stiff or even completely locked in place.

This can make engaging or disengaging the safety difficult or impossible, which can be a major problem in high-pressure situations.

Luckily, fixing this issue is relatively simple. With a thorough cleaning and proper lubrication, you can easily restore the functionality of your safety lever.

Start by disassembling your weapon and removing the slide. Then, use a gun cleaner or solvent to remove any built-up grime from the safety lever mechanism and surrounding areas.

Next, apply a small amount of gun oil or lubricant to the mechanism and work it into the various parts with a clean cloth or Q-tip. Reassemble your weapon and test the safety lever to ensure proper function.

8. Stovepiping

One of the main causes of stovepiping is a weak or faulty extractor. The extractor is responsible for pulling the spent casing out of the chamber and ejecting it out of the firearm.

If the extractor is worn out, dirty, or improperly installed, it may not grip the casing properly, causing it to slip out of the chamber and get caught in the slide.

Another possible cause of stovepiping is a weak recoil spring. The recoil spring helps absorb the recoil energy and pushes the slide back into place after firing.

If the spring is worn out or too weak, it may not be able to push the slide back with enough force, leading to a failure to eject.

To solve the stovepiping issue, first, ensure that your firearm is clean and well-maintained. Check and clean the extractor and its spring to ensure it functions properly. Use a high-quality lubricant to keep the firearm running smoothly.

Additionally, consider replacing the recoil spring with a stronger one to ensure the slide returns to its proper position with enough force.

3 Best Alternatives To Ruger EC9s 

1. Smith & Wesson M&P Shield 

The Smith & Wesson M&P Shield is a compact and lightweight 9mm handgun known for accuracy, reliability, and comfort.

With a durable polymer frame and steel slide, it offers a solid grip and adjustable sights for improved accuracy. Affordable yet dependable, it’s a great alternative to the Ruger EC9s.

2. Glock 43 

The Glock 43 is a popular choice among gun enthusiasts for its reliability and ease of use. Lightweight and compact, it’s easy to carry and handle.

It prioritizes safety by featuring a polymer frame, steel slide, and a safe action trigger system.

The interchangeable backstraps customize the grip size, catering to shooters of all hand sizes.

With its reputation for quality and reliability, it’s a top contender as an alternative to the Ruger EC9s.

3. Sig Sauer P365 

The Sig Sauer P365 is a new addition to the market, gaining popularity for its impressive features and performance. With a slim and lightweight design, it’s easily concealable.

The P365’s high-capacity magazine holds up to 12 rounds of 9mm ammunition, surpassing other compact handguns. It boasts a crisp trigger and excellent sights for improved accuracy.

Though pricier than the Ruger EC9s, its quality and performance make it a worthy alternative.

Frequently Asked Questions (FAQs)

What should I do if my Ruger EC9s keeps jamming?

If your EC9s is experiencing jamming, try cleaning and lubricating the gun and checking for any additional friction or stickiness. It would be best to inspect the magazine and ammunition for any issues.

How can I prevent ejection problems with my Ruger EC9s?

To prevent ejection problems, ensure the gun is properly lubricated and the ejector pin functions correctly. Additionally, ensure the gun is clean and free from any obstructions that may cause ejection issues.

Is the Ruger EC9s suitable for everyday carry?

The Ruger EC9s is designed as a compact pistol for concealed carry and is one of the most popular choices for everyday carry due to its sleek and lightweight design.

What should I do if I have a new Ruger EC9s experiencing issues?

If you have a new EC9s that is experiencing problems, it’s advisable to contact Ruger for support or warranty repair. They can help diagnose and fix any issues with your new gun.

What is the root cause of most Ruger EC9s problems?

The root cause of most Ruger EC9s problems can be issues with the feed ramp, jamming, and ejection malfunctions, which may stem from improper maintenance, ammunition issues, or component failures.


In this guide, we have discussed the common problems that Ruger EC9s users may encounter and their corresponding solutions.

It is important to remember that every firearm has its own set of issues and it is crucial for gun owners to educate themselves on how to maintain and troubleshoot their weapons properly.

We have also emphasized the importance of regular maintenance and proper handling when it comes to preventing potential problems with your Ruger EC9s. By following the tips and solutions provided in this document, you can ensure your firearm functions properly and safely.

Related Posts:

Ruger LCR 38 Special Problems

Ruger 57 Problems

Ruger SR1911 Problems

Ruger P90 Problems

Ruger SR9 Problems

Remington RM380 Problems

Glock 45 Problems

Smith And Wesson EZ 9mm Problems