Taurus 605 Problems And Their Solutions

The Taurus 605 is a popular revolver among firearm enthusiasts due to its small size and lightweight, making it an ideal choice for concealed carry.

However, like any other firearm, the Taurus 605 may encounter problems that can compromise its accuracy, reliability, and safety.

Some of the most common Taurus 605 problems reported by owners include damaged Forcing Cone, Difficult to cock, Feeding Problems, Trigger Jamming, Cylinder Won’t Stay Locked, Misfire and Tough to Spin the Cylinder.

To address these problems and help Taurus 605 owners get the most out of their firearm, we have created a blog dedicated to identifying common issues and providing effective solutions.

Taurus 605 Problems

Our goal is to help you enhance your shooting experience by providing tips and tricks to overcome any Taurus 605 problems you may encounter.

Our blog posts will cover a wide range of topics, from troubleshooting techniques to preventative maintenance tips and recommendations for aftermarket upgrades.

With our in-depth knowledge of the Taurus 605 revolver and years of experience in the firearms industry, we are confident that our blog will become a valuable resource for Taurus 605 enthusiasts looking to get the most out of their firearm.

So, stay tuned and read our blog for helpful tips and solutions to common Taurus 605 problems.

Taurus 605 Specs

Specifications Details
Caliber .357 Magnum / .38 Special
Capacity 5 rounds
Action Double action / Single action
Barrel Length 2 inches
Frame Material Steel
Grips Rubber
Trigger Pull  10-12 pounds (double action), and 4-6 pounds (single action)

Common Taurus 605 Problems And Solutions

1. Damaged Forcing Cone

The forcing cone is a critical component of any revolver that is responsible for directing the bullet through the barrel.

However, due to various reasons, it can get damaged.

A damaged forcing cone is a condition in the revolver where the cone-shaped portion at the front end of the barrel has been damaged, usually due to regular wear and tear or excessive pressure from the bullet.

This can lead to a variety of problems such as difficulty in firing the revolver, poor accuracy, and even increased risk of injury.

One of the primary reasons for a damaged forcing cone is using ammunition that produces excessive force. The repeated exposure to high-pressure loads can cause the cone to wear out, leading to cracks and deformations.

Another reason could be the accumulation of fouling, which can build up in the cone whenever you fire your revolver. The presence of rust and pitting in the barrel can also contribute to forcing cone damage.

How can you fix this issue? First and foremost, it is essential to inspect your revolver regularly for any signs of forcing cone damage. If you notice any deformations or cracks, you must take immediate action to fix it.

The best way to repair a damaged forcing cone is to get it reamed by a professional gunsmith. They will use a specialized tool to remove any deformations or fouling from the cone, thereby restoring it to its original shape.

Additionally, it is crucial to choose the right ammunition to prevent putting too much pressure on the forcing cone.

2. Difficult to Cock

You might have faced this issue with your firearm, but it is commonly found in the Taurus 605 model. It can be frustrating and can also affect the accuracy of your shots.

One of the primary reasons for difficult cocking in revolvers is the excess build-up of dirt, debris, and corrosion. This can cause friction between moving parts and make cocking tough.

Another possible issue could be the weak springs that cause the cylinder rotation slowly or not at all, thereby hindering the cocking process. Finally, worn-out or damaged parts, such as the hand or pawl, can also be responsible for this problem.

To fix these issues, follow these step-by-step instructions:

  1.  Disassemble the revolver to gain access to the internal parts easily.
  2.  Clean all the critical regions of the revolver’s assembly with a solution, such as solvent or lubricant. This can help eliminate dirt and debris, which is causing friction.
  3. Check if the springs are worn out or damaged. Measure the spring’s length and replace them with new springs of the same dimension.
  4. Inspect the worn-out or damaged parts and replace them with new ones, such as the hand or pawl, if necessary.
  5. Reassemble the revolver and make sure everything is connected correctly.

3. Feeding Problems

Feeding problems refers to malfunctioning a gun’s ability to reload cartridges without any manual intervention or jamming. This can be extremely frustrating and may affect the gun’s performance and the shooter’s confidence.

There are a few reasons why feeding problems may arise in revolvers. Firstly, the issue may be due to the ammunition itself. Improperly seated bullets, improper sizing, or bullet deformities can cause jamming and feeding problems.

Secondly, failures in the gun’s mechanics may also cause feeding problems. This can include issues with the cylinder, extractor rod, or barrel. Lastly, shooter error such as limp-wristing or improper technique can lead to feeding problems.

Luckily, these issues can be resolved with some easy troubleshooting steps. Firstly, ensure that the ammunition being used is of good quality, properly sized, and seated correctly.

Secondly, ensure that the gun is clean and properly lubricated. A dirty gun can cause feeding problems as well.

Thirdly, double-check for any mechanical issues within the gun. If problems persist, have the gun professionally inspected and serviced by a licensed gunsmith.

4. Trigger Jamming

Trigger jamming is a common issue that arises in revolvers, often causing inconvenience and even danger at times.

Trigger jamming occurs when the trigger mechanism in a revolver becomes stuck and fails to release the hammer.

This can happen due to various reasons, such as dirt, debris, or rust build-up, worn out parts, or lack of maintenance. When trigger jamming occurs, the revolver cannot be fired, making it useless in emergencies.

The main cause of trigger jamming is a lack of maintenance. Neglecting to clean and oil your revolver regularly can cause the internal parts to become dirty and clogged with debris, leading to jamming.

Additionally, constantly used parts, like the trigger mechanism, can become worn out over time, causing them to malfunction.

Fortunately, there are some simple solutions to fix trigger jamming in a revolver. Here’s how to do it in a few easy steps:

Step 1: Remove the cylinder from your revolver and inspect the trigger mechanism for any dirt, debris, or rust build-up. If there is any, clean it using a small brush, solvent, and a soft cloth.

Step 2: Check the springs and other moving parts for wear and tear. If necessary, replace any worn out parts with new ones.

Step 3: Apply a light coat of oil to the internal parts, including the trigger mechanism. Use a high-quality lubricant designed specifically for firearms.

Step 4: Reassemble and test the revolver to ensure the trigger mechanism works properly.

5. Cylinder Won’t Stay Locked

The cylinder is an integral part of the revolver and it’s essential for the proper functioning of the firearm. It’s an extremely frustrating issue, especially when you’re at the range or in a self-defense situation.

There can be several reasons why the cylinder won’t stay locked. The most common reasons can include a worn-out cylinder release, a damaged or warped cylinder, and a poorly fitted ejector rod.

A worn-out cylinder release happens when the latch that holds the cylinder in place becomes worn down or damaged over time. A damaged or warped cylinder occurs due to wear and tear or extreme stress. A poorly fitted ejector rod can result in the cylinder coming loose while firing.  ruger

Fixing the issue of a cylinder that won’t stay locked is relatively simple, and most of the time, it can be fixed without any professional help. Here are some simple steps that you can follow to fix the issue:

Step 1: Disassemble the revolver and inspect the cylinder release. Ensure that the release is not worn out or damaged. If it is, replace it with a new one.

Step 2: Examine the cylinder for any damages or warping. If you find any, replace the cylinder with a new one.

Step 3: Check the ejector rod for a proper fit. Remove and reposition it if it’s poorly fitted to ensure it fits perfectly.

Step 4: Reassemble the revolver and test it to ensure that the cylinder stays locked while firing.

6. Misfire

Various factors can cause this frustrating issue, but the good news is that it can be fixed. Let’s dive into what a misfire is, the main causes, and how to resolve the issue step-by-step.

Firstly, a misfire refers to the failure of your handgun to ignite the primer when you pull the trigger. This can cause a range of problems, including delayed firing or even no firing at all.

The main causes of misfire include faulty ammunition, a clogged firing pin, a damaged or worn-out hammer spring, a broken firing pin, or improper lubrication.

To resolve these issues, start by checking your ammunition. Ensure that it is high quality and not old or stale. If your ammunition looks fine, move on to inspecting your firing mechanism.

Disassemble your pistol and clean it thoroughly, paying extra attention to the firing pin and hammer spring. If either of these components appear worn or damaged, consider replacing them.

Next, check the lubrication level of your firearm. Ensure that it is properly lubricated to ensure consistent performance.

Finally, reassemble your firearm and test it out. If the misfire persists, consider taking it to a licensed gunsmith or contacting the manufacturer for further assistance.

7. Tough to Spin the Cylinder

Are you experiencing problems this issue and the cylinder is sticking, and you have to push it hard to get it moving in this taurus model?

If yes, then you are not alone! Many firearms enthusiasts often encounter this problem while shooting.

If you are grappling with this issue, the primary culprit may be the build-up of powder residue in the chamber.

A cylinder that is tough to spin typically occurs after firing several shots, and it is not uncommon for powder residue to build up.

The powder residue can cause the cylinder to stick, making it difficult to rotate. Fortunately, fixing this issue can be relatively simple, and we are here to guide you through it.

To address the problem of a tough cylinder to spin, the first step is to unload the revolver and ensure it is devoid of any live ammunition.

Next, the revolver should be disassembled, and the cylinder and all its associated parts should be cleaned thoroughly. Use a gun cleaning kit that includes a specialized solvent and cleaning brush, designed to eliminate all the built-up powder residue from the cylinder and other affected parts.

Once you have thoroughly cleaned and dried the revolver, the next step is to lubricate all moving parts, including the cylinder, with the appropriate gun oil.

Ensure you use gun oil that is specifically designed for firearms and don’t overdo it with the lubrication.

Aim to apply the lube sparingly on all the moving parts, as too much lubrication may attract dirt, dust, and fouling.

What Do The User Think About Taurus 605

The Taurus revolver has been known in the gun community as a dependable and popular choice among many. However, some users have reported experiencing problems when using this firearm.

Some common issues that have been reported include malfunctioning cylinder release, difficulty with extraction, and inconsistent firing.

One specific issue that has been frequently reported is that the cylinder release can sometimes become stuck. This can be a major problem when reloading and continuously firing quickly.

Another commonly reported issue is that users have experienced difficulty with extracting spent rounds from the cylinder. This can cause delays in reloading and can be frustrating for the user.

Finally, some users have reported that the Taurus 605 is not as consistent in firing as they would like it to be. Some have reported that it can be difficult to place shots due to this inconsistency accurately.

Overall, while the Taurus 605 is generally considered a reliable and well-made revolver, users should be aware of these potential issues before purchasing one.

Frequently Asked Questions

What caliber is the Taurus 605?

The Taurus 605 is chambered for .357 Magnum and .38 Special cartridges. It can hold five rounds of .357 Magnum and six rounds of .38 Special.

What is the barrel length of the Taurus 605?

The barrel length of the Taurus 605 is 2 inches, which makes it easy to conceal in a holster or pocket.

What is the overall construction of the Taurus 605?

The Taurus 605 features an aluminum frame, stainless steel cylinder, and barrel. It weighs just 20 ounces, which makes it comfortable to carry for extended periods.

How accurate is the Taurus 605?

The Taurus 605 is highly accurate at short distances, making it ideal for personal defense situations. Its fixed front sight and adjustable rear sight make it easy to aim and shoot accurately.

What are the safety features of the Taurus 605?

The Taurus 605 features a transfer bar safety, which prevents the hammer from striking the firing pin unless the trigger is pulled fully. It also has a Taurus Security System, which allows the owner to lock the gun with a code, providing an additional layer of security when the firearm is not in use.


the Taurus 605 revolver may have a few drawbacks that can pose challenges for some firearm owners. However, these issues can be skillfully addressed with the proper guidance and attention to detail.

By following the thorough guidelines, 605 owners can optimize this revolver for everyday carry and ensure that it operates at its best for years.

With this knowledge and expertise, T 605 enthusiasts can confidently utilize this firearm to defend themselves and their loved ones.

With its reliable firepower and sturdy design, the Taurus 605 is an excellent choice for those seeking a dependable, practical revolver for personal defense.

Related Posts:

Taurus G3C Problems

Taurus 856 Problems

Taurus GX4 Problems

Taurus TX22 Problems

Taurus Curve Problems

Taurus Tracker 44 Magnum Problems

Taurus 692 Problems