Taurus Curve Problems And Their Solutions

ByRobert

The Taurus Curve is a unique and innovative firearm introduced in 2015 by Taurus International.

It is a small, lightweight handgun designed to be carried discreetly and comfortably in a pocket or purse.

Taurus 692 Problems

Regarding caliber and rounds, the Taurus Curve is chambered for .380 ACP (Automatic Colt Pistol) cartridges. This caliber is popular for concealed-carry handguns due to its compact size and moderate stopping power.

The Curve’s magazine capacity is six rounds, which is fairly typical for a firearm of its size.

But I have come across many forum discussions mentioning various issues with the Taurus Curve for different reasons.

The users complained about some common problems with Taurus Curve, which include Failure To Eject, Failure To Feed, Jamming Problems, Trigger Pull Problems, and Slide Problems, Accuracy Problems.

In this article, I have fully covered all the issues and the recall incident, including solutions to each problem. Let’s begin.

Common Taurus Curve Problems And Their Solutions

1. Failure To Eject 

Have you ever experienced a failure to eject problem with your firearm? If so, you know first-hand the frustration and potential safety risks that arise from such an issue.

For those unfamiliar with the term, failure to eject occurs when a spent casing remains in the chamber after firing, leading to a jammed gun and preventing the next round from loading.

There are several potential causes for failure to eject, including but not limited to:

1. Dirty or worn out extractor – The extractor removes the spent casing from the chamber. If it is not functioning properly due to dirt, debris, or general wear and tear, it may fail to do its job.

2. Weak or worn recoil spring – The recoil spring absorbs the fired round’s shock and energy, allowing the slide to travel back and forth. If it is weak or worn out, the slide may not travel back far enough to eject the spent casing.

3. Ammunition issues – Low-quality or improperly sized ammunition can cause ejection problems.

4. Magazine problems – If the magazine is not properly seated or is dirty or worn out, it may not feed the next round properly, leading to an ejection issue.

So, how can you fix these issues in a step-by-step manner?

Here are some potential solutions:

1. Clean the extractor – Remove the extractor and clean it thoroughly with a brush and solvent. Reinstall and test.

2. Replace the extractor – If it is too worn or damaged, it may need to be replaced. Consult with your firearm manufacturer or a qualified gunsmith for assistance.

3. Replace the recoil spring – If it is weak or worn out, it needs to be replaced. Consult with your firearm manufacturer or a qualified gunsmith for assistance.

4. Use high-quality, properly sized ammunition – Ensure that you are using ammunition that your firearm is designed to handle and that it is of high quality.

5. Clean and inspect the magazine – Ensure that it is properly seated and that it is clean and free from debris. It may need to be replaced if worn out or damaged.

2. Failure To Feed

As a gun owner, you know that reliable feeding of ammunition is critical for safe and successful shooting.

But have you ever experienced failure-to-feed (FTF) issues with your Taurus Curve or any other firearm?

Failure to feed happens when a firearm fails to pick up and chamber a fresh round of ammunition from the magazine or the cylinder for the next shot.

FTF can result in a malfunction or a stoppage that requires manual intervention to clear. FTF can occur at different stages of the feeding process, such as:

  • Failure to strip a round from the magazine or the cylinder.
  • Failure to align the round with the chamber or the barrel.
  • Failure to push the round into the chamber.
  • Failure to lock the slide or the bolt in the battery.

FTF can happen for various reasons, some of which are related to the gun itself, while others are more related to the ammo or the shooter.

Here are some common causes of FTF and some possible solutions:

1. Dirty or worn out magazines:

Magazines are often the culprits of FTF problems, especially if they are not cleaned or replaced regularly.

FTF can be caused by weak springs, damaged followers, or dirty or rusty bodies that prevent the rounds from feeding smoothly. To fix this issue, you can try:

  • Cleaning the magazines thoroughly with a soft brush, a rag, and some solvent that doesn’t harm the finish or the plastic parts.
  • Inspecting the springs and the followers for damage or wear, and replacing them if necessary.
  • Lubricate the magazines lightly with oil or grease that doesn’t attract dirt or dust.

2. Bad or mismatched ammo:

Sometimes the ammo you use can cause FTF issues, especially if it is not of good quality, not within the specs of your gun, or not compatible with your gun’s feeding system.

For example, you may experience FTF if you use:

  • Steel-cased, aluminum-cased, or reloaded rounds that don’t have enough power or friction to cycle the action.
  • Rounds that have damaged or deformed rims, necks, or primers that don’t fit properly in the magazine or the cylinder.
  • Hollow-point or flat-nose rounds don’t feed well in guns designed for full-metal-jacket or round-nose rounds.
  • Long or short rounds that don’t match the length or the caliber of your gun.

To avoid or fix these issues, you can try:

  • Using only factory-made, name-brand ammo that has a good reputation for quality and consistency.
  • Checking the specs of your gun’s manual or the manufacturer’s website for the recommended ammo types, weights, and velocities.
  • Inspecting the rounds visually for any defects or irregularities that might cause FTF.
  • Trying different types or brands of ammo to see if they work better than others.

3. Gun-related causes:

Finally, some FTF problems may be caused by issues that are more inherent to the gun itself, such as:

  • A dirty or corroded chamber, bore, or action that prevents the rounds from seating properly or moving freely.
  • A weak or faulty extractor or ejector that doesn’t remove the spent casing or the unfired round from the chamber or the cylinder.
  • A worn or loose barrel or slide that doesn’t lock up tightly or consistently.
  • A damaged or improperly tuned recoil or hammer spring that affects the timing or the energy of the action.

To identify and fix these issues, you may need to:

  • Disassemble the gun and clean it thoroughly with the right tools, solvents, and techniques that don’t harm the finish or the function of the parts.
  • Inspect the parts visually, or with the help of a magnifying glass or a light source, for any signs of wear, damage, or deformation.
  • Replace the worn-out or damaged parts, or seek the help of a certified gunsmith or a manufacturer’s service department if you are not comfortable doing it yourself.
  • Test the gun with different types of ammo and under different conditions to ensure that the FTF problem has been resolved.

3. Jamming Problems

Jamming occurs when the bullet does not feed, fire, or eject correctly. There are various reasons why jamming problems occur in firearms.

These problems may include poor cleaning, magazine-related issues, weak ammunition, and firing mechanism issues.

The causes of jamming problems must be addressed promptly to maintain the proper function of the Taurus Curve.

How To Fix

Firstly, to prevent jamming, you should clean your firearm frequently. Even the slightest dirt or oil build-up can cause a bullet to jam.

To clean your Taurus Curve, disassemble it and use approved cleaning solvents to clean all its parts.

Secondly, Magazine-related issues can contribute to jamming too. Ensure that the magazine is clean, properly aligned, and is in good condition.

Next, weak ammunition can also be a reason for jamming issues. Replace old or defective bullets with new ones, and buy only high-quality ammunition from reputable brands.

Lastly, if the firing mechanism of the Taurus Curve is not aligned correctly, it may cause jamming. In this case, you may need to take your firearm to a professional gunsmith.

4. Trigger Pull Problems

Trigger pull refers to the force required to pull the trigger and discharge a bullet from the firearm.

This is an important factor to consider as it can affect the shooter’s accuracy, speed, and overall safety.

Now, let’s look at the common causes of trigger pull problems.

One of the most common issues is a heavy trigger pull, which can be felt as a stiff trigger and require excessive force to pull the trigger.

This can be caused by a lack of proper maintenance, a buildup of debris in the mechanism, or poorly lubricated parts.

Another issue is a gritty trigger pull, which can be felt as a rough and jerky trigger.

This can be caused by dirt or corrosion on the trigger mechanism, or improper cleaning techniques.

Here are a few step-by-step solutions:

For a heavy trigger pull:

  • Check for debris and dirt build-up in the trigger mechanism.
  • Clean the parts of the trigger mechanism using a cleaning solution and a brush.
  • Apply a light coat of lubricant to the trigger mechanism.
  • Test the weapon to ensure a smooth trigger pull.

For a gritty trigger pull:

  • Disassemble the trigger mechanism carefully.
  • Use a cleaning solution and a brush to remove any dirt or corrosion build-up from the trigger mechanism parts.
  • Apply a light coat of lubricant to the trigger mechanism parts.
  • Reassemble the trigger mechanism carefully.
  • Test the weapon to ensure a smooth trigger pull.

5. Slide Problems

Are you facing any slide problems with your Taurus Curve like a shifted rear sight or gun malfunction? Many Taurus Curve owners have reported similar issues.

Fortunately, several causes for slide problems can be addressed with just a few steps. First, it’s important to make sure that your gun is properly lubricated.

Applying a light coating to all moving parts using a high-quality gun oil will help ensure smooth operation and prevent undue friction.

Next, it’s important to ensure that your gun is properly cleaned. After firing your gun, be sure to thoroughly remove all fouling and residue using a high-quality gun cleaning solution.

This will help prevent debris from accumulating and causing slide problems.

Another common cause for slide problems is worn or damaged parts.

If you notice that your gun is failing to cycle or that your rear sight is shifting, it may be time to replace certain components of your Taurus Curve.

You can easily find replacement parts online or at your local gun store.

Finally, it’s important to remember that regular maintenance is crucial to keeping your Taurus Curve functioning at its best.

Regularly cleaning and lubricating your gun can help prevent slide problems before they occur.

6. Accuracy Problems 

Dear readers, have you ever experienced accuracy problems with your firearms? Accuracy is critical for any gun owner, and the Taurus Curve is no exception.

Despite being a highly rated and popular model, some users have reported accuracy issues. If you are facing similar problems, don’t worry –

We will discuss the causes of accuracy problems and how to fix them step by step.

The causes of accuracy problems can be many – ranging from external factors such as weather conditions to internal ones like mechanical issues or improper usage.

One of the most common factors is shooter error, including poor grip, unstable stance, or improper trigger pull.

Environmental conditions like wind, temperature, and humidity can also impact accuracy.

Mechanical issues such as malfunctions with the firing pin, improper alignment of the sights, or barrel fouling can also lead to accuracy issues.

Now, the question that arises is – how can we fix these accuracy problems? Firstly, addressing the external factors is crucial.

Checking the weather forecast and adjusting one’s shooting position or stance accordingly can help minimize the impact of environmental conditions.

A good grip, stable stance, and proper trigger pull are essential for consistent accuracy. Practicing regularly and getting professional training is highly recommended.

Secondly, addressing the internal mechanical issues requires a thorough inspection and diagnosis of the problems.

Regular maintenance and cleaning of the firearm are crucial to ensure proper functioning.

Any malfunctioning parts or faulty components need to be replaced or repaired promptly.

Checking the alignment of the sights and cleaning the barrel thoroughly can help eliminate accuracy issues caused by mechanical factors.

What Do The User Think About Taurus Curve 

After extensive research and analysis of user reviews and feedback, it appears that the Taurus Curve has received a lot of negative feedback from its users.

The complaints and concerns are varied, but some of the recurring issues include the design of the gun, the quality of the materials used, and the weapon’s reliability.

Many users have stated that the Taurus Curve is uncomfortable to hold and shoot due to its unique curved design.

They have also mentioned that the gun is difficult to operate, and the trigger pull is heavy and stiff.

Additionally, several users have experienced malfunctions and misfires, which has caused them to lose confidence in the weapon’s reliability.

Furthermore, there are concerns about the build quality and durability of the Taurus Curve.

Some users have reported that the finish on the gun scratches easily and wears off quickly, while others have had issues with the gun breaking down after only a few uses.

Overall, it is clear that the Taurus Curve has not lived up to the expectations of many of its users.

The negative feedback and reviews serve as a warning to potential buyers to carefully consider their options before investing in this particular firearm.

3 Best Alternatives To Taurus Curve

We understand the importance of finding a firearm that fits your personal needs and preferences. After careful consideration, we recommend the following three alternatives to the Taurus Curve:

1. Taurus TX22:

This compact and lightweight semi-automatic handgun is a popular choice for both novice and experienced shooters. The TX22 features a 16-round magazine capacity and a smooth, consistent trigger pull that enhances accuracy.

Additionally, the ergonomic grip and adjustable rear sight make this an exceptionally comfortable and customizable option.

2. Taurus G2S:

The G2S is a compact and reliable striker-fired pistol with excellent price range. This gun features a 7+1 capacity, adjustable rear sight, and a crisp trigger pull. The G2S also boasts an impressive selection of safety features, including a manual safety, trigger safety, and loaded chamber indicator.

3. Taurus 44 Magnum:

If you’re looking for a powerful and accurate revolver, look no further than the Taurus 44 Magnum. With a 6.5-inch barrel and capacity of six rounds, this gun is known for its impeccable accuracy at long distances.

The soft rubber grip and adjustable rear sight make the 44 Magnum a comfortable and versatile hunting and target shooting option.

We hope that these three options provide you with a wide range of alternatives to the Taurus Curve. Each firearm offers unique benefits and features that can enhance your overall shooting experience. Ultimately, the decision is yours, and we encourage you to choose the most comfortable and intuitive gun.

Frequently Asked Questions

What caliber is the Taurus Curve?

It is chambered in .380 ACP.

How many rounds can the Taurus Curve hold?

Around 6 round magazine capacity.

What is the weight of the Taurus Curve?

It weigh approximately 10 ounces.

Does the Taurus Curve have a laser sight?

Yes, it comes with an integrated red laser sight.

Is the Taurus Curve ambidextrous?

The Taurus Curve is designed for ambidextrous use with reversible magazine release and non-slip grip texturing.

What is the price of the Taurus Curve?

The price may vary but it typically ranges from $250 to $350.

What is the warranty on the Taurus Curve?

This gun comes with Taurus’ limited lifetime warranty, which covers defects in materials and workmanship for the firearm’s life.

Conclusion

The Taurus Curve has faced its fair share of problems, but the good news is that there are solutions to these issues.

The most significant problem with the Curve is its unconventional shape, making it difficult for some people to handle and shoot accurately.

However, this issue can be overcome with a little practice and some shooting technique adjustments.

Another problem with the Taurus Curve is the relatively low-capacity six-round magazine.

However, this can be easily remedied by carrying extra magazines or investing in a magazine extender.

Not to mention, the six-round capacity is more than enough for personal defense situations.

Despite its problems, the Taurus Curve is a reliable and innovative firearm with unique features, such as its built-in laser sight and the patented curved design.

These features make it an attractive option for those who are looking for a concealed carry weapon that is easy to conceal and maneuver.

Overall, it is important to remember that no firearm is perfect, and each comes with its own pros and cons. The Taurus Curve is no exception.

However, with proper training and an open mind, the Curve can be an excellent addition to anyone’s collection.

So, the Taurus Curve is worth considering if you are in the market for a concealed-carry handgun.

In closing, it is essential to approach the Taurus Curve and any other firearm with respect and responsibility.

Educate yourself about firearms safety, practice regularly, and always follow the cardinal gun handling rules.

By doing so, you can ensure that you are using your firearms safely and effectively and that you will be prepared to defend yourself and your loved ones in any situation.

Related Posts: