Taurus Tracker 44 Magnum Problems And Their Solutions

The Taurus Tracker 44 Magnum is a powerful revolver designed for hunting and personal defense. It is chambered in the .44 Magnum caliber, known for its stopping power and ability to take down large game.

The Taurus Tracker 44 Magnum features a stainless steel frame and cylinder, giving it durability and resistance to corrosion.

It has a 4-inch barrel and an overall length of 9.12 inches, making it relatively compact and easy to handle.

However,  even though the Taurus Tracker 44 Magnum has a good reputation, I have found many complaints from it’s users over the forums and discussion sites.

Let’s begin addressing the problems, their possible causes, and potential solutions for your convenience.

Common Taurus Tracker 44 Magnum Problems And Their Solutions

1. Failure To Eject 

If you are a Taurus Tracker 44 Magnum owner, you may have encountered an issue known as Failure To Eject, or FTE, like many others.

This occurs when a spent casing fails to eject properly from the firearm after firing, causing a jam and rendering the weapon inoperable.

Now, you may be wondering what causes this issue to occur? There are a few possible reasons, including improper grip or stance, a dirty or worn-out extractor, weak ammunition, or a weak recoil spring.

Fortunately, there are steps you can take to address these issues and prevent FTE from happening.

First, ensure that you use proper grip and stance techniques while firing. This will help to ensure that the spent casing is ejected smoothly.

If the issue persists, you may need to clean or replace your extractor, as a dirty or worn-out extractor can impede ejection.

Make sure to clean your firearm on a regular basis to prevent any build-up of debris.

Alternatively, weak ammunition can also cause FTE. Be sure to use high-quality ammunition that is appropriate for your firearm.

Finally, if your recoil spring is weak, it may not provide enough force to eject the casing properly. In this case, you may need to replace your recoil spring.

2. Trigger Sticking Problems

Trigger sticking is a common problem encountered by many firearm owners. It can be frustrating and can even pose a safety risk if not resolved properly.

Trigger sticking is when the trigger of a gun does not move smoothly or fails to reset after being pulled.

The causes of trigger sticking problems can vary and are not limited to any specific type of firearm.

One common cause of trigger sticking is the build-up of debris or rust in the trigger or firing mechanism.

Another possible cause is worn out or damaged trigger components such as trigger springs or sear engagement surfaces.

Fixing trigger sticking issues requires careful attention to detail and step-by-step troubleshooting.

The first step is to ensure that the gun is unloaded before attempting any disassembly or cleaning.

It is also important to have the right tools and follow the manufacturer’s instructions on disassembly and reassembly.

Next, inspect the trigger components for any damage or wear. Any parts that are worn out or damaged should be replaced immediately.

Cleaning the trigger area with a solvent such as gun cleaner or isopropyl alcohol can help remove any debris or rust that may be causing the problem.

Finally, lubricating the trigger mechanism with a light gun oil like CLP can help ensure smooth operation and prevent future sticking issues.

It is essential to follow the manufacturer’s recommendations for lubrication and avoid over-lubricating the gun, which can attract debris and cause further problems.

3. Failure To Feed

Failure To Feed, or FTF, is a technical term used to describe the failure of a cartridge to move into the chamber of the firearm for firing.

This issue can arise for various reasons, including magazine problems, ammunition issues, or problems with the firearm’s feeding mechanism.

The most common cause of FTF is the magazine. The firearm’s magazine assists with feeding the ammunition into the firearm, so if the magazine is faulty or dirty, it can cause the cartridges to fail to feed properly.

The first step in fixing a FTF issue is ensuring the magazine is clean and lubricated.

Check for any cracks or deformities on the magazine and replace it if necessary.

Another common cause of FTF is ammunition issues. It is important to use high-quality ammunition that is compatible with your firearm.

Damaged or improperly stored ammunition can cause FTF, so ensure that you store your ammunition properly and inspect them before use.

Lastly, the feeding mechanism of the firearm can also cause FTF.

The feeding mechanism is responsible for smoothly feeding the cartridges into the chamber for firing.

If it is damaged, dirty or improperly lubricated, it can lead to FTF. Regular maintenance and cleaning of your firearm can help prevent this issue.

4. Cylinderl Not Lock in Lace

Have you ever encountered a frustrating situation where your Taurus Tracker 44 Magnum’s cylinder would not lock in place?

Various factors can cause this and may hinder your ability to use your firearm properly. However, fear not, as there are steps you can take to address this issue.

Firstly, let’s discuss the potential causes for the cylinder not locking in place. One common cause is a dirty or worn out ejector rod.

This can prevent the cylinder from properly aligning with the frame. Additionally, a faulty cylinder release may also be to blame.

Inspecting both of these parts to see if they need to be cleaned or replaced is important.

Another potential cause is a misaligned cylinder stop.

When the cylinder is not properly aligned with the lock notches on the hammer, it won’t lock in place.

Over time, the stop may become worn or damaged, preventing it from properly holding the cylinder in place.

Now, onto the steps you can take to address this issue.

Firstly, ensure that the ejector rod is clean and functioning properly. A simple cleaning with a degreaser can often solve this issue.

If the rod shows signs of wear, a replacement may be necessary.

Next, inspect and clean the cylinder release. Any grime or debris around this area can cause the release to malfunction.

If cleaning does not help, a replacement may be necessary.

Finally, please take a close look at the cylinder stop and make sure it is properly aligned. If it isn’t, try tightening any screws or pinching anything that needs to be pinched.

4. Hammer Hangs up

This can be a frustrating and potentially dangerous problem that may occur due to various reasons.

Fortunately, there are ways to identify the causes of the problem and fix it yourself. This article will guide you through the steps to identify causes and fix the issue.

Firstly, it is imperative to understand the causes of the hammer hanging up in your Taurus Tracker 44 Magnum.

Common causes may include the hammer spring being degraded, the frame or cylinder bolt being loose, or a mechanical problem in the hammer itself.

In addition, debris or gunk buildup inside the gun can also cause the hammer to hang up.

Now, onto how you can fix the issue. Firstly, ensure that your gun is unloaded, disassembled and cleaned thoroughly.

Check for debris and gunk inside the gun and remove it if necessary.

Once the gun is clean, check the hammer spring to see if it has been degraded. If it has, replacing it with a new one will solve the issue.

Then, check the frame and cylinder bolt to make sure they are tight. If either of them is loose, tighten them with a screwdriver or wrench.

It is essential to ensure that all bolts and screws in your gun are tightened properly to avoid any unwanted movements or accidents.

If none of these steps fix the issue, you may need to seek professional help.

Take your gun to a local gunsmith or contact the manufacturer to have the gun inspected and repaired. It is always better to be safe than sorry when it comes to firearms.

3. Jamming Problems

We understand how frustrating it can be to have your weapon malfunction during critical moments.

Fortunately, jamming problems can be fixed with proper maintenance and simple troubleshooting.

One of the main causes is a dirty or fouled weapon. When fired, residue builds up in the chamber and barrel, causing difficulty in cycling the next round.

Another cause is improper ammunition usage.

Using cartridges that are incompatible or of poor quality can cause jamming.

Lastly, faulty magazine or feeding problems can also contribute to jamming.

To fix the issue of jamming, here are some simple steps that you can follow:

1. Check your weapon for any signs of fouling or build-up. Clean your weapon using the manufacturer’s recommended cleaning solution and tools.
2. Inspect your ammunition and ensure that you’re using the correct type and caliber for your weapon.
3. Examine your magazine and feeding components. Make sure that they’re functioning correctly and are clean.
4. Practice proper shooting techniques, as improper handling of the weapon can also contribute to jamming.

6. Accuracy Problems

As a gun enthusiast or a hunter, you understand that accuracy is fundamental when firing your firearm, especially with high-powered guns such as the Taurus Tracker 44 Magnum.

Therefore, it can be quite frustrating to experience accuracy problems that make it challenging to hit your target accurately.

These are persistent issues that affect the precision of your shots.

Some of the common issues include shooting off-center, shooting too high or too low, and shooting too far left or right, among others.

Accuracy issues can be attributed to many factors, including faulty sights or sighting techniques, inconsistent ammunition, poor grip, and improper trigger pull.

To fix these issues and improve your accuracy, the first step is to identify the cause. If you are experiencing issues with your sights, you may want to adjust them accordingly.

For instance, you may want to raise your sights if the shots consistently shoot low.

Another common cause of accuracy issues is inconsistency with ammunition.

Inconsistent ammo can cause your shots to land in different places every time you fire. Therefore, ensure that you are using quality and consistent ammunition.

It is also crucial to check the fit of your firearm with the specific caliber of ammunition you are using.

Poor grip can also cause accuracy problems, especially when shooting a high-powered gun such as the Taurus Tracker 44 Magnum.

Ensure you have a firm and consistent grip on the firearm every time you shoot. Proper trigger pull technique is another important aspect to consider.

Make sure that you are pulling the trigger straight back, and avoid jerking or pulling it sideways.

What Do The User Think About Taurus Tracker 44 Magnum

Despite receiving some negative feedback regarding certain issues, many Taurus Tracker 44 Magnum users are still highly impressed with this firearm.

The Tracker 44 Magnum is known for its high accuracy and power, making it a great choice for hunting, as well as self-defense purposes.

One of the standout features of this gun is its versatility. It comes with various barrel lengths and grip styles, allowing users to customize it according to their needs.

The Tracker 44 Magnum is also relatively light and easy to handle, making it an ideal choice for those who want to shoot with precision and accuracy.

Furthermore, many users appreciate the gun’s easy maintenance and durability.

The Taurus Tracker 44 Magnum is made with high-quality materials and advanced technology to ensure that it remains functional and efficient over time.

Despite some reports of minor issues with the gun’s recoil and trigger mechanisms, users find it a reliable and trustworthy firearm.

3 Best Alternatives For Taurus Tracker 44 Magnum

While this model offers great accuracy and power, we understand that some customers may prefer different options. Allow us to provide you with some alternatives that may suit your needs.

1. Taurus 608

Firstly, the Taurus 608 is a .357 Magnum revolver with an eight-round capacity and excellent performance.

It features a comfortable grip and a smooth, easy-to-use trigger, making it a popular choice for hunters or those seeking a reliable home defense firearm.

2. Taurus TH9

Another option to consider is the Taurus TH9, a 9mm semi-automatic handgun that offers great value for its price.

Its ergonomic design makes it easy to grip and control, while the extended magazine allows for up to 17 rounds of ammunition.

3. Taurus PT 738

Lastly, the Taurus PT 738 is a compact and lightweight .380 ACP handgun that is perfect for concealed carry.

With its slim profile and smooth trigger pull, it can be easily carried on the go without compromising on power or reliability.

These alternatives offer unique advantages and may be more suitable for your personal preferences and intended use.

We hope you find this information useful in making an informed decision.

Frequently Asked Questions

What is a Taurus Tracker 44 Magnum?

Taurus Tracker 44 Magnum is a revolver firearm chambered for the .44 Magnum cartridge. It is produced by the Brazilian gun manufacturer Taurus International.

What is the barrel length of a Taurus Tracker 44 Magnum?

Typically between 2.5 and 4 inches.

What is the weight of a Taurus Tracker 44 Magnum?

On average, it weighs between 28 and 44 ounces.

Is the Taurus Tracker 44 Magnum a reliable firearm?

Yes, it is considered to be a reliable firearm. It has a solid reputation for accuracy and durability.

What is the capacity of a Taurus Tracker 44 Magnum?

Typically 5 rounds.

Is the Taurus Tracker 44 Magnum suitable for self-defense?

Yes, it can be a suitable firearm for self-defense. Its large caliber and sturdy construction make it an effective option for personal protection.

What is the price range of a Taurus Tracker 44 Magnum?

Typically ranges from $500 to $800.

What is the difference between the Taurus Tracker 44 Magnum and the Taurus Raging Bull?

The main difference between the Taurus Tracker 44 Magnum and the Taurus Raging Bull is that the Raging Bull has a larger frame and can handle higher caliber cartridges. The Raging Bull has a longer barrel and larger grip, making it more suitable for target shooting.

Conclusion

As I wrap up my discussion about Taurus Tracker 44 Magnum problems and solutions, I would like to offer a unique perspective that is often overlooked in conversations surrounding firearms.

While it is important to address issues and find solutions to problematic situations, it is equally important to remember responsible gun ownership’s role in keeping ourselves and those around us safe.

Owning a firearm is a right that should not be taken lightly and requires much responsibility.

Part of this responsibility involves being knowledgeable about your firearm and properly maintaining it to prevent malfunctions or accidents.

It also involves being mindful of where and how you use your firearm and adhering to all laws and regulations surrounding gun ownership.

With this in mind, it is crucial that we as gun owners prioritize safety and proper handling techniques, rather than simply focusing on the problems and solutions of specific firearms.

By doing so, we can work towards a safer and more responsible gun-owning community.

In closing, I urge all gun owners to take responsibility for their firearms and prioritize safety above all else.

While it may not be the most exciting or glamorous aspect of gun ownership, it is certainly one of the most important and cannot be overlooked.

Related Posts:

• Common Taurus 605 Poly Problems and Their Solutions
• Taurus 709 Slim Problems and Their Solutions
• Taurus PT22 Problems And Their Solutions
• Taurus G2S Problems And Their Solutions
• Common Taurus TCP 380 Problems and Their Solutions