Rock Island VR80 Shotgun Problems And Their Solutions
The Rock Island VR80 shotgun is popular among gun enthusiasts due to its reliability, durability, and customization options.
However, like any mechanical device, it is not without its problems.
In this guide, we will discuss some common problems that users have faced with the VR80 shotgun and their potential solutions.
Some of the most common problems with VR80 shotguns reported by shooters are Barrel issues, Failure to eject, Mag Release Problems, Jamming Problems, Firing Pin Issues, and Reliability Issues.
Common Rock Island VR80 Shotgun Problems And Their Solutions
Contents
1. Barrel issue
One of the most common reasons for barrel problems is when the barrel extension is not installed correctly.
This can lead to issues with the shotgun’s accuracy and even cause the barrel to come loose during shooting.
Another prevalent issue is when the gas block or system components are not installed correctly, leading to overpressure or under-gas.
This can lead to the shotgun’s barrel damage or even cause it to explode during shooting.
Fortunately, fixing these issues isn’t too complicated. If you’re facing barrel problems due to an incorrectly installed barrel extension, you can try reinstalling the extension or seek professional help.
If your barrel issues are due to gas block and system components, ensure they’re correctly installed. If these aren’t the issues, then it’s advisable to take your shotgun to a professional gunsmith for further inspection.
2. Failure to Eject
There are several causes of failure to eject in the VR80 shotgun, but the most common reasons include a dirty gun, weak or faulty springs, worn-out parts, or low-quality ammunition. Dirt and grime can build up inside the gun, causing the responsible components to fail.
Weak or faulty springs can prevent the bolt from moving back far enough to eject the spent casing. Worn out parts such as the extractor or the ejector, can cause the gun to fail to eject.
Shotguns that use low-quality or improperly loaded ammunition can also experience issues with failure to eject.
Fortunately, there are several methods to fix this issue. The first thing to do is to ensure that your VR80 shotgun is adequately cleaned before use.
This can prevent dirt and grime buildup, which can cause the gun to malfunction.
Replacing weak or faulty springs can resolve issues with failure to eject. If you suspect that worn-out parts are the reason for the malfunction, replacing them can bring your VR80 shotgun back to proper working condition.
Lastly, choosing high-quality ammunition can prevent future issues with failure to eject.
3. Mag Release Problem
The most common causes of mag release problems in the Rock Island VR80 shotgun include weak or improperly installed mag springs, buildup of debris and dirt in the mag well, and a misaligned mag release button.
Fortunately, there are several solutions to these issues that can help get your shotgun back in proper working order.
If the mag release is not functioning properly due to a weak or improperly installed mag spring, replacing the spring with a higher quality or properly installed one can solve the problem.
When there is debris and dirt in the mag well, simply cleaning and lubricating the mag release and mag well can help ensure proper function.
Finally, a misaligned mag release button can be adjusted or replaced to solve the problem.
Overall, it is important to address mag release issues promptly and properly to ensure the safety and reliability of your shotgun.
By identifying the causes and implementing the appropriate solutions, you can enjoy a smooth and reliable shooting experience with your Rock Island VR80 shotgun.
4. Jamming Problems
The main cause of jamming problems in the Rock Island VR80 shotgun is often related to the choice of ammunition.
With so many shotgun shells in the market, it’s crucial to choose the right type and quality that works best with the VR80.
Using low-quality or poorly loaded ammunition may cause the gun to misfeed or fail to eject, leading to jamming problems.
Another factor that may contribute to jamming problems is improper cleaning and maintenance of the gun.
When you shoot a lot, residue and buildup from gunpowder and other contaminants may accumulate on various parts of the gun, affecting its function.
Therefore, it’s essential to ensure that you clean and maintain your VR80 regularly, using the right cleaning agents and procedures.
So, how can you fix these jamming problems? Start by examining the type and quality of ammunition you’re using.
Ensure you use high-quality shotgun shells that work best with the VR80, and avoid using overly cheap or low-quality products.
Additionally, ensure that you clean your VR80 regularly, paying particular attention to the chamber, magazine, and bolt carrier group. Anyone can do this task with the right tools and guidelines.
5. Reliability Issues
Let’s talk about the specific reliability issues plaguing the Rock Island VR80 shotgun.
Technically speaking, one of the main causes for these reliability issues is the magazine.
The VR80 shotgun uses a detachable box magazine, sometimes leading to feeding problems if not loaded or seated correctly.
Additionally, the magazine can become damaged or worn over time, further contributing to feeding issues.
To fix these issues, it’s essential to ensure the magazine is loaded and seated correctly. Please pay close attention to how you load the magazine and how it’s seated in the gun. It may also be helpful to clean the magazine and inspect it for any signs of damage.
Another potential fix is to upgrade to higher-quality magazines. Many VR80 owners report that aftermarket magazines, such as those from MKA or SGM Tactical, have improved the reliability of their guns.
If feeding issues persist, cleaning and inspecting the shotgun for any damage or malfunctions may be necessary.
Regular cleaning and maintenance can go a long way in preventing reliability issues with the VR80.
6. Firing Pin Issues
The firing pin is a critical component of any firearm, responsible for striking the primer to ignite the gunpowder and propel the bullet forward.
Some common causes of firing pin issues include a broken or damaged firing pin, improper cleaning and maintenance, and worn-out springs.
If your firing pin is broken or damaged, it may need to be replaced to ensure proper firing.
Another cause of firing pin issues is improper cleaning. If your gun isn’t cleaned regularly, dirt and debris can build up and cause misfires.
It’s important to clean your firing pin and the surrounding area regularly to prevent this from happening.
Worn out springs can also cause firing pin issues. Over time, the stress of repeated use can wear out the springs in your gun, causing them to lose their tension.
This can result in misfires and other issues, so it’s important to inspect and replace worn out springs regularly.
3 Best Alternatives To VR80 Shotgun
1. Mossberg 930
The Mossberg 930 is a reliable and high-performance gas-operated semi-automatic shotgun that competes with the VR80. With a capacity of up to 9 rounds, it is suitable for hunting and home defense.
One of its key advantages is versatility, with different models like the SPX, JM Pro, and Waterfowl editions, catering to various preferences and purposes.
2. Benelli M4
The Benelli M4 is a rugged and reliable gas-operated shotgun favored by military and law enforcement agencies. It can hold up to 7 rounds and is known for its ability to withstand harsh environments.
What sets it apart from the VR80 Shotgun is the patented “Auto-Regulating Gas System” (ARGO), improving cycling speed and reducing recoil. This makes it ideal for competitive shooting and tactical use.
3. Remington 870
The Remington 870 is a classic pump-action shotgun popular among gun enthusiasts. Despite having a lower capacity than the VR80 Shotgun, its reliability, simplicity, and affordability make it a great alternative.
In addition to the traditional pump-action design, the Remington 870 offers various models and configurations like the Marine Magnum and Express Tactical, catering to different purposes.
Frequently Asked Questions (Faqs)
Conclusion
In conclusion, the Rock Island VR80 shotgun is a reliable and efficient firearm with a few common problems that can easily be addressed.
If you are experiencing any issues with your VR80, always check for common causes such as improper lubrication or dirty parts.
It may seem like a hassle, but taking the time to maintain your shotgun properly can greatly improve its performance.
If the problems persist, don’t hesitate to seek professional help. The VR80 is a complex firearm and may require the expertise of a gunsmith for more serious issues.
However, with proper care and maintenance, you can avoid most common problems and enjoy the full potential of your VR80 shotgun.
Related Posts:
