Taurus Tracker 627 Problems And Their Solutions

If you own a Taurus Tracker 627, chances are that you absolutely love shooting it. This powerful revolver is known for its reliability and durability, making it a favorite among gun enthusiasts.

However, like any other firearm, the Taurus Tracker 627 can encounter problems from time to time.

In this guide, we will go over some common issues that owners of the Taurus Tracker 627 may face and provide solutions to help you get back to shooting in no time.

So, if you’re experiencing any difficulties with your Taurus Tracker 627, keep reading! We’ve got you covered.

Some of the most common problems with Taurus Tracker 627 are Failure To Feed, Shells Seizing Issues, Difficulty Cocking the Hammer, Jamming Issues and Cylinder Issues.

Quick Overview of Problems And Solutions

Problem Solution
Failure To Feed Check the Ammo, clean the chambers
Jamming Issues Inspect the recoil spring, clean the barrel
Shell Seizing Issue Replace the ammo
Difficulty Cocking the Hammer Change the hammer spring
Cylinder Issues Clean and lubricate the gun

Common Taurus Tracker 627 Problems And Their Solutions

1. Failure To Feed

Having a Taurus Tracker 627 and experiencing failure to feed issues can be frustrating, especially when you’re at the range trying to practice your shooting skills.

You might start to think that something is wrong with your gun or that you need to take it to a gunsmith for repairs.

However, before going through all these troubles, there are some things you can try on your own to fix this problem.

First, ensure you use the correct ammunition for your Taurus Tracker 627. The gun is designed to use .357 Magnum or .38 Special cartridges, so using any other type of ammo can cause feeding issues.

Double-checking your ammunition before heading out to the range is always a good idea.

If you are already using the correct ammunition, then the next step is to thoroughly clean your gun.

Sometimes build-up of dirt and debris can cause a failure to feed. This can be easily fixed by giving your gun a good cleaning.

Be sure to pay extra attention to the feeding ramp and chamber, as these are usually the areas where build-up occurs.

If cleaning your gun doesn’t work, then it’s time to check the magazine. Make sure it is properly seated and functioning correctly.

If there are any visible issues with the magazine, you may need to replace it.

If none of these solutions work, then it’s time to seek professional help from a gunsmith.

2. Shells Seizing Issue

It’s hard to imagine anything more frustrating than trying to shoot your gun, only to find that the shells won’t eject. But don’t worry, we’re here to help.

First, let’s talk about what might be causing the issue. It could be a problem with the bore, or it could be that a part of the gun is damaged or malfunctioning.

Without a thorough examination, it’s tough to say for sure. But one thing is for certain – this is a common problem with Taurus Tracker 627, and you’re not alone.

One possible solution is to use high-quality ammunition. Cheap or low-quality ammo can cause problems with your gun.

So, invest in good quality brands and see if that helps. Also, make sure you’re cleaning your gun regularly.

Buildup can cause issues with shells ejecting properly.

Another solution is to take your gun to a gunsmith. They can inspect your gun for any damage or wear and tear and make repairs as needed.

Your warranty might even cover this, so check with Taurus to see what they can do.

3. Difficulty Cocking the Hammer

First, let’s talk about what “difficulty cocking the hammer” means. Essentially, this issue arises when you’re trying to pull the hammer back into the cocked position and it feels like there’s resistance or the hammer is getting stuck.

Sometimes, you might be able to get it into the cocked position, but it takes a lot more effort than it should.

So, why is this happening? There are a few potential reasons. One common cause is that there’s debris or dirt inside the mechanism that’s preventing the hammer from moving smoothly.

Another possibility is that the spring inside the gun has worn down or become distorted over time, making it harder to pull the hammer back.

Now, onto the solutions. If you suspect that the issue is due to debris or dirt inside the gun, you can try cleaning it out with a gun cleaning kit.

Follow the manufacturer’s instructions carefully and use the appropriate tools to avoid damaging the gun.

If you’ve tried cleaning the gun and the problem persists, your next step would be to have a gunsmith take a look at it.

They’ll be able to diagnose the issue and make any necessary repairs or replacements.

It’s worth noting that this could be a costly solution, so be prepared to spend some money if you go this route.

Finally, if you’re experiencing this issue while firing the gun, it’s important to use caution and not force the hammer back into position.

This could cause the gun to misfire or even become damaged. Instead, consider using a different gun for several rounds while you work on fixing the issue with your Tracker 627.

4. Jamming Issues

One common cause of jamming is a failure to eject spent casings properly. A dirty or worn extractor can cause this.

To fix this, try cleaning the extractor and its channel thoroughly. If that doesn’t work, you may need to replace the extractor.

Another possible cause of jamming is using low-quality or faulty ammunition. Be sure to use high-quality ammunition from a reputable brand to avoid this issue. Additionally, make sure the ammunition is compatible with your firearm.

Magazine issues can also cause jamming. One problem could be a weak or worn-out spring in the magazine. You may need to replace the magazine spring to solve this.

Another issue could be a damaged or worn-out magazine follower. Try replacing the magazine follower to see if that helps.

5. Cylinder Issues

One common problem is a misaligned cylinder that can lead to difficulty rotating the cylinder or failing to fire. If you suspect this is the issue, take your firearm to a gunsmith to have it fixed.

Another cylinder-related issue is a loose cylinder. This can cause the cylinder to wobble or even fall out of alignment, leading to firing problems and other safety concerns.

To fix this, you’ll need to have the cylinder lockup adjusted or replaced by a professional.

Sometimes, the cylinder release latch can get sticky or fail to release properly, causing the cylinder to jam or prevent removal. You can try cleaning the latch and surrounding areas with a gun cleaning solution or contact a gunsmith for assistance.

3 Best Alternatives To Taurus Tracker 627 

1. Smith & Wesson Model 686

The Smith & Wesson Model 686 is a classic revolver that has been in production for over three decades.

It’s chambered in .357 Magnum and features a full-lug barrel, making it more accurate than most revolvers on the market.

The stainless steel construction also adds to its durability, making it a long-lasting investment. With a 6-round cylinder and an ergonomic grip, the Model 686 is comfortable to shoot and easy to handle.

It’s also available in various barrel lengths, allowing you to choose the one that suits your shooting style.

2. Ruger GP100

Another popular alternative to the Taurus Tracker 627 is the Ruger GP100. This revolver has a reputation for being one of the most rugged and reliable revolvers on the market.

It’s chambered in .357 Magnum and features a 6-round capacity, making it a great option for self-defense and hunting.

The solid steel frame and barrel also contribute to its durability, while the rubber grip ensures a comfortable and secure hold. With adjustable sights and a smooth trigger pull, the Ruger GP100 offers excellent accuracy for its price point.

3. Colt Python

While the Taurus Tracker 627 has been praised for its affordability, the Colt Python is known for its high-end quality and craftsmanship.

This .357 Magnum revolver features a beautiful polished stainless steel finish and a 6-round cylinder. It’s also equipped with an adjustable rear sight and a ramp front sight for improved accuracy.

The Colt Python has been described as one of the smoothest shooting revolvers on the market, making it a top choice for those who value performance and prestige.

Frequently Asked Questions (FAQs)

What is The Cost of a Taurus 627?

It cost you around $487.99

Is Taurus 627 double action?


What caliber is a Taurus tracker?

357 Magnum Revolver


In conclusion, owning a Taurus Tracker 627 can bring about some problems that may hinder your shooting experience.

However, proper maintenance and handling can easily solve most of these issues. It is important to regularly clean and lubricate your revolver to prevent malfunctions and ensure smooth operation.

Related Posts:

Taurus 605 Problems

Taurus G3C Problems

Taurus 856 Problems

Taurus GX4 Problems

Taurus Curve Problems

Taurus Tracker 44 Magnum Problems

Taurus 692 Problems

Taurus TX22 Problems