Tisas 1911 Problems And Their Solutions

The Tisas 1911 is a finely crafted firearm that has stood the test of time. Despite its incredible craftsmanship, you may run into issues or problems while using it.

In this article, we will explore some of the most common problems and their solutions for the Tisas 1911 so you can continue to enjoy it for many years to come.

The most common problems with Tisas 1911 gun are Failure To Feed Issue, Mag Problems, Ejecting Issues, Extractor Problems, Firing Pin Stuck, Hard to Rack, Accuracy Issues and Hammer Bite.

Tisas 1911 Problems

With proper maintenance and knowledge of what could go wrong, you can keep your weapon running smoothly and safely. Let’s take a look at some of the issues and how to fix them now!

Quick Overview of Tisas 1911 Specs

Specification Details
Caliber 45 ACP
Capacity 8+1
Barrel Length 5 inches
Weight 39 Ounces
Grips Checkered synthetic grips
Sights Fixed front and rear sights
Finish Cerakote
Trigger Skeletonized trigger

Most Common Tisas 1911 Problems And Their Solutions

1. Failure To Feed Issue

One of the more common issues encountered with Tisas 1911 pistols is a “Failure To Feed” issue.

This can be caused by several factors, including incorrect magazines, improper feeding angle, or worn out springs and parts.

It is important to assess each gun component individually to troubleshoot this issue. Start by ensuring you use the proper magazine for your pistol – check your manual or contact customer service if unsure.

Next, inspect the feed ramp and chamber for any debris or obstructions that could prevent rounds from properly loading into the chamber.

Finally, check all components that handle ammunition, such as extractors, ejectors, and magazine followers for signs of wear & tear which may need to be replaced.

2. Mag Problem

The “Mag Problem” is a common issue faced by Tisas 1911 users. This problem occurs when the pistol’s magazine fails to release from the frame of the pistol, causing it to become stuck in place. If this happens, here are some potential solutions:

1. Firstly, you should check that all rounds have been removed from the magazine before attempting to remove it.

2. Next, firmly hold the barrel of the gun and then pull on the base of the magazine as if you were releasing it. You may need also to give it a little wiggle as you do this.

3. If these first two techniques do not work, try striking or tapping on the frame near where the magazine is inserted. This can cause the magazine to shift slightly, allowing for easier removal.

4. If all else fails, place a small amount of lubricant on the sides of the magazine and try steps 1-3 again.

3. Ejecting Issues

If you are experiencing difficulty ejecting the Tisas 1911, ensuring your firearm is properly lubricated and cleaned before attempting to address any other issues is important.

Before attempting any solutions, check the slide assembly for dirt or debris buildup which can cause jamming and malfunction of the pistol. If this does not solve your issue, consider the following solutions:

1. Make sure your magazine isn’t inserted too tightly. The magazine must be seated securely in order for proper operation. If inserted too far back, it can cause problems loading rounds into the chamber.

2. Ensure that all frame, slide, and barrel parts fit together snugly and with no slack (especially at the barrel lug). If the fit is too tight, it can cause issues ejecting spent cartridges.

3. Check the recoil spring assembly for any signs of wear or damage. If damaged, replace the entire assembly as necessary.

4. Make sure that the slide stop lever is in place and functioning properly. This component keeps the slide from locking open prematurely when inserting a magazine or manually releasing a round from the chamber.

5. Inspect all components for excessive oil or grease buildup, as this can impair normal operation of your pistol and could lead to jamming and other problems related to ejection.

4. Extractor Problems

Have you encountered extractor problems with your Tisas 1911? Extractors are the small arms of a Tisas 1911 that are responsible for ejecting spent casings from the firearm.

If you’re experiencing difficulty in this part of your gun, it may be due to several common issues.

One issue could be that the slide does not return to its full forward position after firing, resulting in an incomplete extraction process.

An inadequate bullet feed system or insufficient recoil spring tension often causes this. To fix this problem, first examine the magazine and make sure rounds are feeding correctly and smoothly into the chamber.

Adjusting or replacing recoil springs and ensuring the slide is properly lubricated are recommended solutions.

Another common extractor issue is a broken or worn-out part. Extractors are designed to withstand a large amount of wear and tear, but over time they can become loose or even break off entirely.

If this happens, purchasing a new extractor from a reputable gun parts supplier and having it professionally installed is important.

Finally, if the extractor does not function correctly after attempting all the above solutions, there may be an issue with the barrel itself.

This could include an uneven finish on the breech face or chamber throat, which prevents rounds from fully engaging the extractor.

To fix this problem you will need to get your gun inspected by a certified gunsmith.

5. Firing Pin Stuck

A stuck firing pin is one of the most common problems with Tisas 1911. Have you ever tried to fire your gun and nothing happened? This is often due to the firing pin being stuck in its chamber.

The first step in resolving this issue is to remove the slide from the frame.

Once removed, inspect the inside of the slide for any obstructions that could be blocking the firing pin.

If necessary, use a small brush or needle-nose pliers to carefully remove any debris that may have collected in the chamber.

After this is done, reassemble your Tisas 1911 and test for proper functionality.

If the firing pin still won’t move after cleaning out the obstruction, it likely needs to be replaced.

First, remove all other components from the frame, such as the recoil spring and barrel.

Next, locate the two levers on either side of the firing pin housing and gently push them inwards until they come loose from their positions.

With these now free, you can then lift off the entire firing pin assembly from its place within the slide. From there, you can access and replace the firing pin itself. Once finished, reassemble your Tisas 1911 to complete the task.

6. Hard to Rack

Many gun enthusiasts have encountered the problem of racking a Tisas 1911. Have you ever tried to fire this popular handgun, only to find that it’s difficult to pull back the slide? If so, you’re not alone.

This is a common issue for many owners of the Tisas 1911. Fortunately, there are some simple solutions.

First, make sure that the firearm is adequately lubricated. This will help reduce friction and make racking the slide easier.

If there are any issues with the barrel lugs, you can also use a gunsmith to file them down for a more precise fit.

You may also want to consider replacing the magazine spring, as this can cause additional resistance when pulling back the slide.

Finally, if all else fails, you can try using a different brand of ammunition or upgrade your recoil spring weight for an even easier rack time.

7. Accuracy Issues

Another most commonly reported issue with the Tisas 1911 is accuracy. Have you ever experienced your shots not being where you had aimed?

Or, on the other hand, have you found that they are consistently landing in different spots than where you were aiming? This could be a sign of an accuracy issue.

There are several possible causes for this issue and there is no one size fits all solution to it.

However, some steps can help narrow down what could be causing the problem so that a more tailored solution can be implemented:

1. Check that your sights are properly aligned: Make sure your sights aren’t misaligned or have anything blocking its view of your target.

2. Use high-quality ammunition: Make sure the ammo you’re using is the correct caliber and high-quality – low-quality ammunition could also contribute to accuracy issues.

3. Clean your firearm regularly: A gun that is not regularly cleaned and lubricated can build up residue, grime, and corrosion, which can negatively affect accuracy.

4. Have a qualified gunsmith inspect it for possible problems: If all else fails, consider having an experienced gunsmith inspect the Tisas 1911 for loose parts or other underlying issues that may be preventing it from functioning properly.

8. Hammer Bite

Hammer bite occurs when the hammer, which rests against the web of your hand while it’s being fired, cuts or bruises your skin.

This issue is quite simple to address and can be resolved with either a few minor adjustments or by purchasing aftermarket parts.

The first step to preventing hammer bite is to adjust the trigger reach distance. A qualified gunsmith should do this, as incorrect adjustment can cause serious malfunctions in your pistol.

If the trigger reach distance is too short, it will cause the shooter’s grip on the gun to put excessive pressure on their palm directly below where the hammer sits. This pressure will cause the hammer to bite into the skin.

Another effective solution is to install an extended beavertail grip safety on your Tisas 1911 pistol.

This part covers the hammer with an extended shield made from rubber or metal, preventing it from contacting your hand and causing any damage.

It also adds a nice aesthetic touch to your gun and greater control while shooting.

Finally, you can replace the factory-issued grips on your Tisas 1911 with aftermarket ones that feature a palm swell design.

These ergonomic grips provide improved comfort and stability by extending slightly beyond where the hammer rests when firing, thus creating more distance between it and your hand.

What Do The User Think About Tisas 1911

Users who have purchased the Tisas 1911 report both good and bad experiences, which may be attributed to some of the newer models being made in Turkey rather than Italy.

Generally, users are satisfied with the overall quality of this pistol, citing its solid construction and high performance.

However, there are some reports of poor fitment between parts and unacceptably-rough machining on certain components.

Additionally, feedback suggests that some customers have encountered problems with rusting or corrosion due to a lack of proper lubrication during long storage periods.

Overall, many Tisas 1911 owners report positive experiences after using their pistol at the range or for defense purposes.

They note its reliability and accuracy even over thousands of rounds fired without any problems.

Many also appreciate this firearm’s classic look and feel and its relatively lightweight design, making it easy to carry all day. Despite some reports of minor issues, most users are more than satisfied with their Tisas 1911 purchase.

Best 3 Alternative To Tisas 1911

As you may already be aware, the Tisas 1911 is one of the most popular firearms in the market today.

However, if you are looking for alternatives to this classic handgun, we would like to suggest the top three options that stand out in terms of performance, reliability, and overall quality.

1. Sig Sauer P365

First on our list is the SIG Sauer P365. This compact, polymer-framed pistol is designed for concealed carry and has gained a reputation as one of the most accurate and reliable guns in its class.

With a 10-round capacity and a crisp trigger pull, the P365 offers impressive firepower without sacrificing mobility or convenience. Its ergonomic grip and low recoil also make it a pleasure to shoot.

2. Beretta M9

Our second pick is the Beretta M9, a classic semi-automatic pistol that has been in service with the US military for decades.

The M9 boasts a full-sized frame, a double/single-action trigger, and a 15-round capacity. Its reputation for accuracy, ease of use, and durability has made it a favorite among law enforcement and civilian gun enthusiasts alike.

Whether you are hitting the range or defending your home, the M9 is a reliable and versatile choice.

3.. Browning Hi-Power

A legendary pistol that has been around for over 80 years. With its high-capacity magazine, slim profile, and single-action trigger, the Hi-Power is ideal for target shooting and self-defense.

Its sleek design and exceptional balance also make it a classic collector’s item.

Frequently Asked Questions

Is the Tisas 1911 reliable for self-defense purposes?

It is a reliable and popular choice for self-defense due to its proven track record, durability, and accuracy.

What types of ammunition does the Tisas 1911 use?

It can use various ammunition types, including .45 ACP, 9mm, and .38 Super.

What is the size and weight of the Tisas 1911?

The Tisas 1911 has a standard 5-inch barrel and weighs approximately 38 ounces.

Can the Tisas 1911 be modified with aftermarket parts?

Yes, the Tisas 1911 can be customized with a wide range of aftermarket parts and accessories to suit individual preferences and needs.

What is the accuracy of the Tisas 1911?

The Tisas 1911 is known for its accuracy and is favored by many competitive shooters for its consistent performance.

What is the price range of the Tisas 1911?

around $512

Related Posts:

CZ P-07 Problems

Taurus 605 Problems

Beretta M9a1 22lr Problems

Mossberg MC2C Problems

Ruger 57 Problems

Taurus 856 Problems